to crimp cables up on a roof
without the need for a soldering iron.
Tom DeReggi
RapidDSL Wireless, Inc
IntAirNet- Fixed Wireless Broadband
- Original Message -
From: MDK
To: WISPA General List
Sent: Tuesday, January 11, 2011 2:16 PM
Subject: [WISPA] MIMO antenna cabling
- Fixed Wireless Broadband
- Original Message -
From: Gino Villarini
To: WISPA General List
Sent: Tuesday, January 11, 2011 3:37 PM
Subject: Re: [WISPA] MIMO antenna cabling...
Beware of interference problems between the cards in the board
Gino A. Villarini
g
yet?
Tom DeReggi
RapidDSL Wireless, Inc
IntAirNet- Fixed Wireless Broadband
- Original Message -
From: MDK
To: WISPA General List
Sent: Tuesday, January 11, 2011 2:16 PM
Subject: [WISPA] MIMO antenna cabling...
I'm in the position of wanting to test the Star-OS MIMO
Scanner software
for Ncards yet?
Tom DeReggi
RapidDSL Wireless, Inc
IntAirNet- Fixed Wireless Broadband
- Original Message -
From: MDK
To: WISPA General List
Sent: Tuesday, January 11, 2011 2:16 PM
Subject: [WISPA] MIMO antenna cabling...
I'm in the position of wanting
I'm in the position of wanting to test the Star-OS MIMO mode, and it occurs to
me that connecting an antenna through a few feet of cable may have some
pitfalls...
I'm going to use dual polarity antennas, and so I'm wondering if I need to use
very closely matching cable lengths for the cables
10ft in RF cable is a Bad Idea I would put you board in a weather proof
box and put it next to your antennas
On 1/11/2011 1:16 PM, MDK wrote:
I'm in the position of wanting to test the Star-OS MIMO mode, and it occurs to
me that connecting an antenna through a few feet of cable may have some
Why is 10' of cable a bad idea.
I am not doing MIMO, but I have cables from 8 to 145' working just fine.
And, the real question wasn't about using cables, but do they need to be
the same length.
Since MIMO is looking for the best signal and/or combining what is sees
from
: support
Sent: Tuesday, January 11, 2011 11:51 AM
To: WISPA General List
Subject: Re: [WISPA] MIMO antenna cabling...
10ft in RF cable is a Bad Idea I would put you board in a weather proof box and
put it next to your antennas
On 1/11/2011 1:16 PM, MDK wrote:
I'm in the position of wanting
List
Subject: Re: [WISPA] MIMO antenna cabling...
I'm aware of cable loss issues, but in this case, that's just not an
option. LMR-400 has low enough loss at 5 ghz that I don't see any big
issue with using it, and the run really isn't all that long.
The radio system is an ALIX mini-itx
