April 25, 2010 1:01 PM
Subject: Re: [WISPA] Remotely Adjusted Dish Mount
> Just mount it to a commercial PTZ camera mount. There are plenty on E-Bay
> and you can mount a camera on it to so you know what you are looking at
> Sent from my Verizon Wireless BlackBerry
>
> -O
[mailto:wireless-boun...@wispa.org] On
Behalf Of Robert West
Sent: Sunday, April 25, 2010 1:43 AM
To: WISPA General List
Subject: [WISPA] Remotely Adjusted Dish Mount
I recently acquired an 80 foot Super Heavy Duty Will-Burt telescopic mast
with the goal for dual use of A) Site Survey and B) Emergency use
PA General List'
Subject: Re: [WISPA] Remotely Adjusted Dish Mount
why not just two TV rotor motors mounted in a cross. Or use a ham rotor on
bottom and light channel master on top. The pole could go thru it so you
could mount a wireless zoom camera to the other side for balance and LOS
convenie
010 6:50 AM
To: WISPA General List
Subject: Re: [WISPA] Remotely Adjusted Dish Mount
Thanks, Mike. That's pretty close to what I envision. I need azimuth and
rotation. I have a set of step motors from an upgrade on one of my
telescopes and thought of maybe doing a McGyver on it but if
t;Mike"
To: "'WISPA General List'"
Sent: Sunday, April 25, 2010 10:07 AM
Subject: Re: [WISPA] Remotely Adjusted Dish Mount
> You'd just wreck the telescope mount unless it is a really robust unit. I
> used one of the Yaesu units to track satellites at my ground
-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Robert West
Sent: Sunday, April 25, 2010 8:50 AM
To: WISPA General List
Subject: Re: [WISPA] Remotely Adjusted Dish Mount
Thanks, Mike. That's pretty close to what I envision. I need azimuth and
rotation. I have a set of step moto
would save me time since I never have any as it is.
The mast has a 125 pound payload rating so I can go pretty beefy.
Bob-
- Original Message -
From: "Mike"
To: "'WISPA General List'"
Sent: Sunday, April 25, 2010 9:24 AM
Subject: Re: [WISPA] Remotely Adjus
a.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Robert West
Sent: Sunday, April 25, 2010 12:43 AM
To: WISPA General List
Subject: [WISPA] Remotely Adjusted Dish Mount
I recently acquired an 80 foot Super Heavy Duty Will-Burt telescopic mast
with the goal for dual use of A) Site Survey and B) Emergenc
TV antenna rotator
Robert West wrote:
> I recently acquired an 80 foot Super Heavy Duty Will-Burt telescopic mast
> with the goal for dual use of A) Site Survey and B) Emergency use during AP
> failure.
>
> I'm looking for a dish mount that can be remotely adjusted while the mast is
> extended.
I recently acquired an 80 foot Super Heavy Duty Will-Burt telescopic mast with
the goal for dual use of A) Site Survey and B) Emergency use during AP failure.
I'm looking for a dish mount that can be remotely adjusted while the mast is
extended. I haven't seen anything in my searches, wanted to
10 matches
Mail list logo