Re: [WISPA] EiOP
How often do you need eoip? What about just tacking on a 750 when needed? On 12/17/09, Robert West robert.w...@just-micro.com wrote: Yeah, been down that route. Official answer from UBNT is no EoIP, no VPN, etc. Seems likes an odd thing to be leaving out. Only logical advice was to flash with third party firmware but if that was the only option I'd rather just put in a 411ah or 433 MT board. But then I'd have to turn off AirMax to anything talking to it unless I'm direct wired which I guess I could do. Then hopefully the UBNT devices will pass the protocol along with the port.? My guess would be it won't. The ease of use that the UBNT has sure limits things. Would be nice if they had a Simple mode for the quick config and install and an Advanced mode for a lot of what the Mikrotik can do. Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 2:40 AM To: WISPA General List Subject: Re: [WISPA] EiOP AirOS doesn't have the feature AFAIK. I'd ask in the Ubnt forums for the best answer. On 12/17/09, Robert West robert.w...@just-micro.com wrote: Yep -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 1:26 AM To: WISPA General List Subject: Re: [WISPA] EiOP Eoip you mean? :) On 12/17/09, Robert West robert.w...@just-micro.com wrote: Anyone here ever figure out a way to tunnel with a UBNT device? Bob- WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] EiOP
Trying to connect remote networks into one. I'll probably end up doing just that, stick a MT at the head end of the remote network. Would have additional benefits anyhow, I guess. No matter how I slice it, Mikrotik always seems to be involved. :) -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 3:20 AM To: WISPA General List Subject: Re: [WISPA] EiOP How often do you need eoip? What about just tacking on a 750 when needed? On 12/17/09, Robert West robert.w...@just-micro.com wrote: Yeah, been down that route. Official answer from UBNT is no EoIP, no VPN, etc. Seems likes an odd thing to be leaving out. Only logical advice was to flash with third party firmware but if that was the only option I'd rather just put in a 411ah or 433 MT board. But then I'd have to turn off AirMax to anything talking to it unless I'm direct wired which I guess I could do. Then hopefully the UBNT devices will pass the protocol along with the port.? My guess would be it won't. The ease of use that the UBNT has sure limits things. Would be nice if they had a Simple mode for the quick config and install and an Advanced mode for a lot of what the Mikrotik can do. Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 2:40 AM To: WISPA General List Subject: Re: [WISPA] EiOP AirOS doesn't have the feature AFAIK. I'd ask in the Ubnt forums for the best answer. On 12/17/09, Robert West robert.w...@just-micro.com wrote: Yep -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 1:26 AM To: WISPA General List Subject: Re: [WISPA] EiOP Eoip you mean? :) On 12/17/09, Robert West robert.w...@just-micro.com wrote: Anyone here ever figure out a way to tunnel with a UBNT device? Bob- WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http
Re: [WISPA] EiOP
UBNT has stated that MT does a lot of those extra features great and if you wanted those features, to add a MT router behind the UBNT wireless device. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -- From: Robert West robert.w...@just-micro.com Sent: Thursday, December 17, 2009 1:55 AM To: 'WISPA General List' wireless@wispa.org Subject: Re: [WISPA] EiOP Yeah, been down that route. Official answer from UBNT is no EoIP, no VPN, etc. Seems likes an odd thing to be leaving out. Only logical advice was to flash with third party firmware but if that was the only option I'd rather just put in a 411ah or 433 MT board. But then I'd have to turn off AirMax to anything talking to it unless I'm direct wired which I guess I could do. Then hopefully the UBNT devices will pass the protocol along with the port.? My guess would be it won't. The ease of use that the UBNT has sure limits things. Would be nice if they had a Simple mode for the quick config and install and an Advanced mode for a lot of what the Mikrotik can do. Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 2:40 AM To: WISPA General List Subject: Re: [WISPA] EiOP AirOS doesn't have the feature AFAIK. I'd ask in the Ubnt forums for the best answer. On 12/17/09, Robert West robert.w...@just-micro.com wrote: Yep -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 1:26 AM To: WISPA General List Subject: Re: [WISPA] EiOP Eoip you mean? :) On 12/17/09, Robert West robert.w...@just-micro.com wrote: Anyone here ever figure out a way to tunnel with a UBNT device? Bob- WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] EiOP
Exactly! Then you have not one, but 2 devices that do the same simple basics and one that does all the simple as well as the advanced. Sigh. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mike Hammett Sent: Thursday, December 17, 2009 10:05 AM To: WISPA General List Subject: Re: [WISPA] EiOP UBNT has stated that MT does a lot of those extra features great and if you wanted those features, to add a MT router behind the UBNT wireless device. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -- From: Robert West robert.w...@just-micro.com Sent: Thursday, December 17, 2009 1:55 AM To: 'WISPA General List' wireless@wispa.org Subject: Re: [WISPA] EiOP Yeah, been down that route. Official answer from UBNT is no EoIP, no VPN, etc. Seems likes an odd thing to be leaving out. Only logical advice was to flash with third party firmware but if that was the only option I'd rather just put in a 411ah or 433 MT board. But then I'd have to turn off AirMax to anything talking to it unless I'm direct wired which I guess I could do. Then hopefully the UBNT devices will pass the protocol along with the port.? My guess would be it won't. The ease of use that the UBNT has sure limits things. Would be nice if they had a Simple mode for the quick config and install and an Advanced mode for a lot of what the Mikrotik can do. Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 2:40 AM To: WISPA General List Subject: Re: [WISPA] EiOP AirOS doesn't have the feature AFAIK. I'd ask in the Ubnt forums for the best answer. On 12/17/09, Robert West robert.w...@just-micro.com wrote: Yep -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 1:26 AM To: WISPA General List Subject: Re: [WISPA] EiOP Eoip you mean? :) On 12/17/09, Robert West robert.w...@just-micro.com wrote: Anyone here ever figure out a way to tunnel with a UBNT device? Bob- WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives
Re: [WISPA] EiOP
On Thu, 2009-12-17 at 00:59 -0500, Robert West wrote: Anyone here ever figure out a way to tunnel with a UBNT device? EoIP is a Mikrotik proprietary solution. It won't work with any device that is not Mikrotik. -- * Butch Evans * Professional Network Consultation* * http://www.butchevans.com/* Network Engineering * * http://www.wispa.org/ * Wired or Wireless Networks * * http://blog.butchevans.com/ * ImageStream, Mikrotik and MORE! * WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] EiOP
If you need something done on a network level..expect MT can do it. My CPE template contains: /interface pppoe-client add ac-name= add-default-route=yes allow=pap,chap,mschap1,mschap2 comment=\ dial-on-demand=no disabled=no interface=wlan1 max-mru=1480 max-mtu=\ 1480 mrru=disabled name=pppoe-out1 profile=default \ service-name= use-peer-dns=yes Then you just change the user= and password= to suit. When I helped someone over the phone I just had them click add and specify the user/password so I'm pretty sure all of those are default values. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 12:47 PM, Robert West robert.w...@just-micro.comwrote: Good stuff, thanks Josh. Sounds like I should just put RouterOS at the head end of the remote networks. Makes sense to me. Then run DUDE on them all and we'll be good, at least that's the way it seems to me. Then the monitoring and administration can be done in one app. Wanting to go to PPPoE, the MT can give me that option within RouterOS itself then, I think. Correct me if I'm whacked here. Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 12:33 PM To: WISPA General List Subject: Re: [WISPA] EiOP There is also l2tp... http://en.wikipedia.org/wiki/L2tp Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 11:56 AM, Robert West robert.w...@just-micro.comwrote: Really? I didn't know that. You learned me somethin' today, Butch. That would explain that. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Butch Evans Sent: Thursday, December 17, 2009 11:53 AM To: WISPA General List Subject: Re: [WISPA] EiOP On Thu, 2009-12-17 at 00:59 -0500, Robert West wrote: Anyone here ever figure out a way to tunnel with a UBNT device? EoIP is a Mikrotik proprietary solution. It won't work with any device that is not Mikrotik. -- * Butch Evans * Professional Network Consultation* * http://www.butchevans.com/* Network Engineering * * http://www.wispa.org/ * Wired or Wireless Networks * * http://blog.butchevans.com/ * ImageStream, Mikrotik and MORE! * WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] EiOP
Cool. I like easy. Explains the existence of my first wife... so maybe it's not as good thing. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 12:50 PM To: WISPA General List Subject: Re: [WISPA] EiOP If you need something done on a network level..expect MT can do it. My CPE template contains: /interface pppoe-client add ac-name= add-default-route=yes allow=pap,chap,mschap1,mschap2 comment=\ dial-on-demand=no disabled=no interface=wlan1 max-mru=1480 max-mtu=\ 1480 mrru=disabled name=pppoe-out1 profile=default \ service-name= use-peer-dns=yes Then you just change the user= and password= to suit. When I helped someone over the phone I just had them click add and specify the user/password so I'm pretty sure all of those are default values. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 12:47 PM, Robert West robert.w...@just-micro.comwrote: Good stuff, thanks Josh. Sounds like I should just put RouterOS at the head end of the remote networks. Makes sense to me. Then run DUDE on them all and we'll be good, at least that's the way it seems to me. Then the monitoring and administration can be done in one app. Wanting to go to PPPoE, the MT can give me that option within RouterOS itself then, I think. Correct me if I'm whacked here. Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 12:33 PM To: WISPA General List Subject: Re: [WISPA] EiOP There is also l2tp... http://en.wikipedia.org/wiki/L2tp Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 11:56 AM, Robert West robert.w...@just-micro.comwrote: Really? I didn't know that. You learned me somethin' today, Butch. That would explain that. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Butch Evans Sent: Thursday, December 17, 2009 11:53 AM To: WISPA General List Subject: Re: [WISPA] EiOP On Thu, 2009-12-17 at 00:59 -0500, Robert West wrote: Anyone here ever figure out a way to tunnel with a UBNT device? EoIP is a Mikrotik proprietary solution. It won't work with any device that is not Mikrotik. -- * Butch Evans * Professional Network Consultation* * http://www.butchevans.com/* Network Engineering * * http://www.wispa.org/ * Wired or Wireless Networks * * http://blog.butchevans.com/ * ImageStream, Mikrotik and MORE! * WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless
Re: [WISPA] EiOP
I so hope she reads your email, I can always use a good laugh! Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 1:02 PM, Robert West robert.w...@just-micro.comwrote: Cool. I like easy. Explains the existence of my first wife... so maybe it's not as good thing. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 12:50 PM To: WISPA General List Subject: Re: [WISPA] EiOP If you need something done on a network level..expect MT can do it. My CPE template contains: /interface pppoe-client add ac-name= add-default-route=yes allow=pap,chap,mschap1,mschap2 comment=\ dial-on-demand=no disabled=no interface=wlan1 max-mru=1480 max-mtu=\ 1480 mrru=disabled name=pppoe-out1 profile=default \ service-name= use-peer-dns=yes Then you just change the user= and password= to suit. When I helped someone over the phone I just had them click add and specify the user/password so I'm pretty sure all of those are default values. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 12:47 PM, Robert West robert.w...@just-micro.comwrote: Good stuff, thanks Josh. Sounds like I should just put RouterOS at the head end of the remote networks. Makes sense to me. Then run DUDE on them all and we'll be good, at least that's the way it seems to me. Then the monitoring and administration can be done in one app. Wanting to go to PPPoE, the MT can give me that option within RouterOS itself then, I think. Correct me if I'm whacked here. Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 12:33 PM To: WISPA General List Subject: Re: [WISPA] EiOP There is also l2tp... http://en.wikipedia.org/wiki/L2tp Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 11:56 AM, Robert West robert.w...@just-micro.comwrote: Really? I didn't know that. You learned me somethin' today, Butch. That would explain that. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Butch Evans Sent: Thursday, December 17, 2009 11:53 AM To: WISPA General List Subject: Re: [WISPA] EiOP On Thu, 2009-12-17 at 00:59 -0500, Robert West wrote: Anyone here ever figure out a way to tunnel with a UBNT device? EoIP is a Mikrotik proprietary solution. It won't work with any device that is not Mikrotik. -- * Butch Evans * Professional Network Consultation* * http://www.butchevans.com/* Network Engineering * * http://www.wispa.org/ * Wired or Wireless Networks * * http://blog.butchevans.com/ * ImageStream, Mikrotik and MORE! * WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org
Re: [WISPA] EiOP
Nah, #1 lives in New York and she can stay there. Long story with that one, but it's all good, I got the kids. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 1:04 PM To: WISPA General List Subject: Re: [WISPA] EiOP I so hope she reads your email, I can always use a good laugh! Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 1:02 PM, Robert West robert.w...@just-micro.comwrote: Cool. I like easy. Explains the existence of my first wife... so maybe it's not as good thing. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 12:50 PM To: WISPA General List Subject: Re: [WISPA] EiOP If you need something done on a network level..expect MT can do it. My CPE template contains: /interface pppoe-client add ac-name= add-default-route=yes allow=pap,chap,mschap1,mschap2 comment=\ dial-on-demand=no disabled=no interface=wlan1 max-mru=1480 max-mtu=\ 1480 mrru=disabled name=pppoe-out1 profile=default \ service-name= use-peer-dns=yes Then you just change the user= and password= to suit. When I helped someone over the phone I just had them click add and specify the user/password so I'm pretty sure all of those are default values. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 12:47 PM, Robert West robert.w...@just-micro.comwrote: Good stuff, thanks Josh. Sounds like I should just put RouterOS at the head end of the remote networks. Makes sense to me. Then run DUDE on them all and we'll be good, at least that's the way it seems to me. Then the monitoring and administration can be done in one app. Wanting to go to PPPoE, the MT can give me that option within RouterOS itself then, I think. Correct me if I'm whacked here. Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 12:33 PM To: WISPA General List Subject: Re: [WISPA] EiOP There is also l2tp... http://en.wikipedia.org/wiki/L2tp Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 11:56 AM, Robert West robert.w...@just-micro.comwrote: Really? I didn't know that. You learned me somethin' today, Butch. That would explain that. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Butch Evans Sent: Thursday, December 17, 2009 11:53 AM To: WISPA General List Subject: Re: [WISPA] EiOP On Thu, 2009-12-17 at 00:59 -0500, Robert West wrote: Anyone here ever figure out a way to tunnel with a UBNT device? EoIP is a Mikrotik proprietary solution. It won't work with any device that is not Mikrotik. -- * Butch Evans * Professional Network Consultation* * http://www.butchevans.com/* Network Engineering * * http://www.wispa.org/ * Wired or Wireless Networks * * http://blog.butchevans.com/ * ImageStream, Mikrotik and MORE! * WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA
Re: [WISPA] EiOP
I haven't found a use for the 750 myself. I have one friend that needed a wired router at home in Kansas and need something of quality - 750 was perfect for that. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 1:16 PM, Robert West robert.w...@just-micro.comwrote: Josh, What applications are you using the RB750's for? -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Robert West Sent: Thursday, December 17, 2009 1:11 PM To: 'WISPA General List' Subject: Re: [WISPA] EiOP Nah, #1 lives in New York and she can stay there. Long story with that one, but it's all good, I got the kids. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 1:04 PM To: WISPA General List Subject: Re: [WISPA] EiOP I so hope she reads your email, I can always use a good laugh! Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 1:02 PM, Robert West robert.w...@just-micro.comwrote: Cool. I like easy. Explains the existence of my first wife... so maybe it's not as good thing. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 12:50 PM To: WISPA General List Subject: Re: [WISPA] EiOP If you need something done on a network level..expect MT can do it. My CPE template contains: /interface pppoe-client add ac-name= add-default-route=yes allow=pap,chap,mschap1,mschap2 comment=\ dial-on-demand=no disabled=no interface=wlan1 max-mru=1480 max-mtu=\ 1480 mrru=disabled name=pppoe-out1 profile=default \ service-name= use-peer-dns=yes Then you just change the user= and password= to suit. When I helped someone over the phone I just had them click add and specify the user/password so I'm pretty sure all of those are default values. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 12:47 PM, Robert West robert.w...@just-micro.comwrote: Good stuff, thanks Josh. Sounds like I should just put RouterOS at the head end of the remote networks. Makes sense to me. Then run DUDE on them all and we'll be good, at least that's the way it seems to me. Then the monitoring and administration can be done in one app. Wanting to go to PPPoE, the MT can give me that option within RouterOS itself then, I think. Correct me if I'm whacked here. Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 12:33 PM To: WISPA General List Subject: Re: [WISPA] EiOP There is also l2tp... http://en.wikipedia.org/wiki/L2tp Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 11:56 AM, Robert West robert.w...@just-micro.comwrote: Really? I didn't know that. You learned me somethin' today, Butch. That would explain that. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Butch Evans Sent: Thursday, December 17, 2009 11:53 AM To: WISPA General List Subject: Re: [WISPA] EiOP On Thu, 2009-12-17 at 00:59 -0500, Robert West wrote: Anyone here ever figure out a way to tunnel with a UBNT device? EoIP is a Mikrotik proprietary solution. It won't work with any device that is not Mikrotik. -- * Butch Evans * Professional Network Consultation* * http://www.butchevans.com/* Network Engineering * * http://www.wispa.org/ * Wired or Wireless Networks * * http://blog.butchevans.com/ * ImageStream, Mikrotik and MORE! * WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless
Re: [WISPA] EiOP
That's what I was thinking of it for as well. Inside the customers home and still can be administered through the network. Thanks. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 1:21 PM To: WISPA General List Subject: Re: [WISPA] EiOP I haven't found a use for the 750 myself. I have one friend that needed a wired router at home in Kansas and need something of quality - 750 was perfect for that. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 1:16 PM, Robert West robert.w...@just-micro.comwrote: Josh, What applications are you using the RB750's for? -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Robert West Sent: Thursday, December 17, 2009 1:11 PM To: 'WISPA General List' Subject: Re: [WISPA] EiOP Nah, #1 lives in New York and she can stay there. Long story with that one, but it's all good, I got the kids. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 1:04 PM To: WISPA General List Subject: Re: [WISPA] EiOP I so hope she reads your email, I can always use a good laugh! Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 1:02 PM, Robert West robert.w...@just-micro.comwrote: Cool. I like easy. Explains the existence of my first wife... so maybe it's not as good thing. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 12:50 PM To: WISPA General List Subject: Re: [WISPA] EiOP If you need something done on a network level..expect MT can do it. My CPE template contains: /interface pppoe-client add ac-name= add-default-route=yes allow=pap,chap,mschap1,mschap2 comment=\ dial-on-demand=no disabled=no interface=wlan1 max-mru=1480 max-mtu=\ 1480 mrru=disabled name=pppoe-out1 profile=default \ service-name= use-peer-dns=yes Then you just change the user= and password= to suit. When I helped someone over the phone I just had them click add and specify the user/password so I'm pretty sure all of those are default values. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 12:47 PM, Robert West robert.w...@just-micro.comwrote: Good stuff, thanks Josh. Sounds like I should just put RouterOS at the head end of the remote networks. Makes sense to me. Then run DUDE on them all and we'll be good, at least that's the way it seems to me. Then the monitoring and administration can be done in one app. Wanting to go to PPPoE, the MT can give me that option within RouterOS itself then, I think. Correct me if I'm whacked here. Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 12:33 PM To: WISPA General List Subject: Re: [WISPA] EiOP There is also l2tp... http://en.wikipedia.org/wiki/L2tp Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 11:56 AM, Robert West robert.w...@just-micro.comwrote: Really? I didn't know that. You learned me somethin' today, Butch. That would explain that. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Butch Evans Sent: Thursday, December 17, 2009 11:53 AM To: WISPA General List Subject: Re: [WISPA] EiOP On Thu, 2009-12-17 at 00:59 -0500, Robert West wrote: Anyone here ever figure out a way to tunnel with a UBNT device? EoIP is a Mikrotik proprietary solution. It won't work with any device that is not Mikrotik. -- * Butch Evans * Professional Network Consultation* * http://www.butchevans.com/* Network Engineering * * http://www.wispa.org/ * Wired or Wireless Networks * * http://blog.butchevans.com/ * ImageStream, Mikrotik and MORE
Re: [WISPA] EiOP
A 750 is the same price point as a Linksys/Dlink/Netgear router, but lacks wireless. If it had wireless many sales would be made. I don't deal much with the customers' routers. Mostly it's reboot it, try again, ok bye. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 1:29 PM, Robert West robert.w...@just-micro.comwrote: That's what I was thinking of it for as well. Inside the customers home and still can be administered through the network. Thanks. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 1:21 PM To: WISPA General List Subject: Re: [WISPA] EiOP I haven't found a use for the 750 myself. I have one friend that needed a wired router at home in Kansas and need something of quality - 750 was perfect for that. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 1:16 PM, Robert West robert.w...@just-micro.comwrote: Josh, What applications are you using the RB750's for? -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Robert West Sent: Thursday, December 17, 2009 1:11 PM To: 'WISPA General List' Subject: Re: [WISPA] EiOP Nah, #1 lives in New York and she can stay there. Long story with that one, but it's all good, I got the kids. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 1:04 PM To: WISPA General List Subject: Re: [WISPA] EiOP I so hope she reads your email, I can always use a good laugh! Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 1:02 PM, Robert West robert.w...@just-micro.comwrote: Cool. I like easy. Explains the existence of my first wife... so maybe it's not as good thing. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 12:50 PM To: WISPA General List Subject: Re: [WISPA] EiOP If you need something done on a network level..expect MT can do it. My CPE template contains: /interface pppoe-client add ac-name= add-default-route=yes allow=pap,chap,mschap1,mschap2 comment=\ dial-on-demand=no disabled=no interface=wlan1 max-mru=1480 max-mtu=\ 1480 mrru=disabled name=pppoe-out1 profile=default \ service-name= use-peer-dns=yes Then you just change the user= and password= to suit. When I helped someone over the phone I just had them click add and specify the user/password so I'm pretty sure all of those are default values. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 12:47 PM, Robert West robert.w...@just-micro.comwrote: Good stuff, thanks Josh. Sounds like I should just put RouterOS at the head end of the remote networks. Makes sense to me. Then run DUDE on them all and we'll be good, at least that's the way it seems to me. Then the monitoring and administration can be done in one app. Wanting to go to PPPoE, the MT can give me that option within RouterOS itself then, I think. Correct me if I'm whacked here. Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 12:33 PM To: WISPA General List Subject: Re: [WISPA] EiOP There is also l2tp... http://en.wikipedia.org/wiki/L2tp Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 11:56 AM, Robert West robert.w...@just-micro.comwrote: Really? I didn't know that. You learned me somethin' today, Butch. That would explain that. -Original Message- From: wireless-boun...@wispa.org [mailto: wireless-boun...@wispa.org] On Behalf Of Butch Evans Sent: Thursday, December 17, 2009 11:53 AM To: WISPA General List Subject: Re
Re: [WISPA] EiOP
I do the same but sadly the magic reboot seems to help in most cases. And I agree, if it had wireless I'd buy bunches but they still look to be handy at the price for wired small business networks. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 1:36 PM To: WISPA General List Subject: Re: [WISPA] EiOP A 750 is the same price point as a Linksys/Dlink/Netgear router, but lacks wireless. If it had wireless many sales would be made. I don't deal much with the customers' routers. Mostly it's reboot it, try again, ok bye. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 1:29 PM, Robert West robert.w...@just-micro.comwrote: That's what I was thinking of it for as well. Inside the customers home and still can be administered through the network. Thanks. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 1:21 PM To: WISPA General List Subject: Re: [WISPA] EiOP I haven't found a use for the 750 myself. I have one friend that needed a wired router at home in Kansas and need something of quality - 750 was perfect for that. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 1:16 PM, Robert West robert.w...@just-micro.comwrote: Josh, What applications are you using the RB750's for? -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Robert West Sent: Thursday, December 17, 2009 1:11 PM To: 'WISPA General List' Subject: Re: [WISPA] EiOP Nah, #1 lives in New York and she can stay there. Long story with that one, but it's all good, I got the kids. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 1:04 PM To: WISPA General List Subject: Re: [WISPA] EiOP I so hope she reads your email, I can always use a good laugh! Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 1:02 PM, Robert West robert.w...@just-micro.comwrote: Cool. I like easy. Explains the existence of my first wife... so maybe it's not as good thing. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 12:50 PM To: WISPA General List Subject: Re: [WISPA] EiOP If you need something done on a network level..expect MT can do it. My CPE template contains: /interface pppoe-client add ac-name= add-default-route=yes allow=pap,chap,mschap1,mschap2 comment=\ dial-on-demand=no disabled=no interface=wlan1 max-mru=1480 max-mtu=\ 1480 mrru=disabled name=pppoe-out1 profile=default \ service-name= use-peer-dns=yes Then you just change the user= and password= to suit. When I helped someone over the phone I just had them click add and specify the user/password so I'm pretty sure all of those are default values. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 12:47 PM, Robert West robert.w...@just-micro.comwrote: Good stuff, thanks Josh. Sounds like I should just put RouterOS at the head end of the remote networks. Makes sense to me. Then run DUDE on them all and we'll be good, at least that's the way it seems to me. Then the monitoring and administration can be done in one app. Wanting to go to PPPoE, the MT can give me that option within RouterOS itself then, I think. Correct me if I'm whacked here. Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 12:33 PM To: WISPA General List Subject: Re: [WISPA] EiOP There is also l2tp... http://en.wikipedia.org/wiki/L2tp Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Thu, Dec 17, 2009 at 11:56
Re: [WISPA] EiOP
Eoip you mean? :) On 12/17/09, Robert West robert.w...@just-micro.com wrote: Anyone here ever figure out a way to tunnel with a UBNT device? Bob- WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] EiOP
Yep -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 1:26 AM To: WISPA General List Subject: Re: [WISPA] EiOP Eoip you mean? :) On 12/17/09, Robert West robert.w...@just-micro.com wrote: Anyone here ever figure out a way to tunnel with a UBNT device? Bob- WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] EiOP
AirOS doesn't have the feature AFAIK. I'd ask in the Ubnt forums for the best answer. On 12/17/09, Robert West robert.w...@just-micro.com wrote: Yep -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 1:26 AM To: WISPA General List Subject: Re: [WISPA] EiOP Eoip you mean? :) On 12/17/09, Robert West robert.w...@just-micro.com wrote: Anyone here ever figure out a way to tunnel with a UBNT device? Bob- WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] EiOP
Yeah, been down that route. Official answer from UBNT is no EoIP, no VPN, etc. Seems likes an odd thing to be leaving out. Only logical advice was to flash with third party firmware but if that was the only option I'd rather just put in a 411ah or 433 MT board. But then I'd have to turn off AirMax to anything talking to it unless I'm direct wired which I guess I could do. Then hopefully the UBNT devices will pass the protocol along with the port.? My guess would be it won't. The ease of use that the UBNT has sure limits things. Would be nice if they had a Simple mode for the quick config and install and an Advanced mode for a lot of what the Mikrotik can do. Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 2:40 AM To: WISPA General List Subject: Re: [WISPA] EiOP AirOS doesn't have the feature AFAIK. I'd ask in the Ubnt forums for the best answer. On 12/17/09, Robert West robert.w...@just-micro.com wrote: Yep -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, December 17, 2009 1:26 AM To: WISPA General List Subject: Re: [WISPA] EiOP Eoip you mean? :) On 12/17/09, Robert West robert.w...@just-micro.com wrote: Anyone here ever figure out a way to tunnel with a UBNT device? Bob- WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/