ssage-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Data Technology
Sent: Thursday, October 08, 2009 9:07 AM
To: e...@wisp-router.com; WISPA General List
Subject: Re: [WISPA] Which connector is which on R52N
I guessed right on the J2 connector.
One thing I di
J2 is the one on the left.
>
> /Eje
> Sent via BlackBerry from T-Mobile
>
> -Original Message-
> From: "Robert West"
> Date: Thu, 8 Oct 2009 02:25:24
> To: 'WISPA General List'
> Subject: Re: [WISPA] Which connector is which on R52N
>
As I said in my previous email j2 is chain 0 and j3 is chain 1. By default v4
rc1 only enable chain 0.
/Eje
Sent via BlackBerry from T-Mobile
-Original Message-
From: Data Technology
Date: Wed, 07 Oct 2009 16:09:59
To: WISPA General List
Subject: Re: [WISPA] Which connector is which
al Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Jayson Baker
Sent: Wednesday, October 07, 2009 11:48 PM
To: WISPA General List
Subject: Re: [WISPA] Which connector is which on R52N
FYI, we powered up a card without an antenna on both ports and damag
transmitter.
/Eje
Sent via BlackBerry from T-Mobile
-Original Message-
From: Jayson Baker
Date: Wed, 7 Oct 2009 21:48:05
To: WISPA General List
Subject: Re: [WISPA] Which connector is which on R52N
FYI, we powered up a card without an antenna on both ports and damaged the
card.
It's TX
[mailto:wireless-boun...@wispa.org] On
Behalf Of Jayson Baker
Sent: Wednesday, October 07, 2009 11:48 PM
To: WISPA General List
Subject: Re: [WISPA] Which connector is which on R52N
FYI, we powered up a card without an antenna on both ports and damaged the
card.
It's TX power is extremely low now.
J
FYI, we powered up a card without an antenna on both ports and damaged the
card.
It's TX power is extremely low now.
Just a warning. I don't remember if it was in N-mode, or B/G mode.
On Wed, Oct 7, 2009 at 3:09 PM, Data Technology wrote:
> Yeah, I forgot to mention the board and OS.
> It's an
Yeah, I forgot to mention the board and OS.
It's an RB433AH with 4.0rc1.
If you are looking down at the card with the connectors at the top and
the gold pins at the bottom, J2 is on the upper left and J3 is on the
upper right.
I was planning on just connecting to J2 and if that did not work then
Data Technology wrote:
> Also, I am looking to use this card with just 1 antenna.
> Not looking to use 'N', just using because cm9's were not available when
> I bought the card.
> I assume this will work ok as long as both TX and RX chains are set to
> the same setting.
Assuming you're using Mik
I am using an R52N card for the first time.
Does chain 0 go with J2 connector and chain 1 go with J3 connector?
The docs on the card does not state which connector is which.
Also, I am looking to use this card with just 1 antenna.
Not looking to use 'N', just using because cm9's were not available
10 matches
Mail list logo