Are these 1131's LWAPP from the factory or did you convert these in the field
from autonomous to LWAPP / CAPWAP? We have found that some of our converted
1230 series APs do this and show the same IEEE PD message on the switch. We
had to go onsite or bring them back to the office to reload the
We found a similar problem with the Blackberry Torch awhile ago on 7.0.98.0 and
load balancing. Essentially with aggressive load balancing between APs turned
on, clients that passively scan have a hard time connecting. I am not sure if
the PS3 actively or passively scans for wireless networks
Hi. In the dorm areas with all the rogue APs do you leave RRM on? Have you
tried freezing the configuration or setting channels manually for an area to
see if the APs continue to reboot? Just out of curiosity how are you finding
out you have 450+ rogue APs? Area any of the dorms next to
Hi. Do you have Fast SSID change enabled on your controllers? This setting
is under Controller-- General. If it is not enabled, enable it and see if you
performance improves. I was told by our SE on 7.0.98.0 code that this is to
help with that issue. My understanding to it is the
The 1200 series (not 1240 series) uses the Cisco pre-standard power. The
pre-standard power flipped the + and - wires. From the Cisco documents it
should support Cisco pre-standard PoE automatically. Do you know if you are
over your power budget for the switches power supply (blinking /
We have a wireless team that consists of dedicated and partial members. The
members that are partial range from a few hours to 3/4 of their time working
on wireless depending on what is needed.
4000+ APs / 30 Controllers 100+ buildings
Dedicated:
(2) Wireless Engineers - RF designs active /
: The EDUCAUSE Wireless Issues Constituent Group Listserv
[mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU] On Behalf Of Helzerman, James
Sent: Tuesday, July 26, 2011 9:58 AM
To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU
Subject: Re: [WIRELESS-LAN] Wifi Support Staff
We have a wireless team that consists of dedicated
