have you tried these instructions ?
http://www.ubnt.com/wiki/Bullet_Nano_mesh
*http://www.ubnt.com/wiki/Pico2_mesh
Also.. flashing firmware to routers that are running redboot you can
also use
'fonflash' utility
http://www.gargoyle-router.com/wiki/doku.php?id=install_guide#other_routers
I just put up a couple of new towers with MT/XR9 based APs. When they
went up about 3 weeks ago, everything was good. Signals were good.
Noise level in the 90s. Customers worked well.
Yesterday we were at a customer that has been problematic for 2 weeks or
so. Connected to the radio with
Something is frequency hopping, maybe RTK (John Deere, find the offender and
work with them to have them skip your frequencies), Water Department SCADA
(MicroHard sells one that does this to us, gotta reconfigure them to skip
your frequencies), Electric Smart Meters (your screwed if this is it)...
900 is voodoo anyway.Notch filters are almost a necessity these days
with 900.
--
Justin Wilson j...@mtin.net
Aol Yahoo IM: j2sw
http://www.mtin.net/blog xISP News
http://www.twitter.com/j2sw Follow me on Twitter
Wisp Consulting Tower Climbing Network Support
From: Chuck Hogg
I have heard that, but in this case every AP another one can see,
regardless of frequency shows the same numbers at the same time. It
looks more like a broad spectrum something, though it could be frequency
hopping, I suppose. Wish I had a good spectrum analyzer.
I may be putting 2.4 on at
Send some info my way I would like to check it out.
Thanks
Liam
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Kevin Sullivan
Sent: Wednesday, February 02, 2011 5:06 PM
To: WISPA General List
Subject: [WISPA] Remote
Anyone using Nera gear out there? I hear it has a bit more transmit
power for longer links. My concern is out growing its capacity. Can
multiple channels be added to a single dish to increase throughput?
How does that work? Looking at picking up a GigE at a datacenter many
miles away and its
I just wanted to take this opportunity to mention that the Mikrotik
RB411 boards are pieces of crap.Half of the ones I have failed
during the cold spell this last week and it turns out that lots of other
people have had the same problems.It is very frustrating to see that
not all of
Whats the tx output?
Gino A. Villarini
g...@aeronetpr.com
Aeronet Wireless Broadband Corp.
787.273.4143
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Matt
Sent: Saturday, February 05, 2011 2:37 PM
To: WISPA General List
Subject:
Nera was just purchased by Ceragon. That may be a good thing or a bad thing
Sent via DROID on Verizon Wireless
-Original message-
From: Matt lm7...@gmail.com
To: WISPA General List wireless@wispa.org
Sent: Sat, Feb 5, 2011 18:37:16 GMT+00:00
Subject: [WISPA] Nera 11ghz Licensed
Anyone
How cold are you talking?
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Matt Larsen - Lists
Sent: Saturday, February 05, 2011 12:42 PM
To: Mikrotik discussions; WISPA General List
Subject: [WISPA] Mikrotik RB411
I just wanted to take
To me as well. Thanks,
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Mathew Howard
Sent: Friday, February 04, 2011 5:29 PM
To: WISPA General List
Subject: Re: [WISPA] Remote monitoring/ remote reboot
I'd be interested in this. Please send some more
Matt... we have over 1,000 of the regular 411 boards in the air...
including many point to point backhaul links. We saw temps down to -30F
this last week and didn't have a single failure.
Travis
Microserv
On 2/5/2011 11:41 AM, Matt Larsen - Lists wrote:
I just wanted to take this opportunity
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Is it just me, or are the reset switches on the ns2 just about worthless?
Anyone here got mesh over wifi working on an ns2? Looks like I'm going
to have to go that route, as opposed to flashing with open mesh.
Or is there a secret to making the
We too have several hundred in the air in ARC cases here in northern MN, no
issues.
Ryan
On Feb 5, 2011, at 1:57 PM, Travis Johnson t...@ida.net wrote:
Matt... we have over 1,000 of the regular 411 boards in the air...
including many point to point backhaul links. We saw temps down to -30F
We don't have a ton right now, but the ones that are up were no problem
during the recent cold spell here in New England...now Tranzeo on the
other hand; I will be glad when we get that crap out of the network!!!
On 02/05/2011 03:01 PM, Ryan Goldberg wrote:
We too have several hundred in the
Ceragon has High Power ODUs and a very good xpic (dual polarity
antennas on the same frequency) support, both good things for the
original poster... but on GigE isn't Dragonwave Quantum a bit better
than Nera/Ceragon ?
Rubens
On Sat, Feb 5, 2011 at 4:58 PM, Bob Moldashel lakel...@gbcx.net
Same here. Lightning takes out Ethernet sometimes but other than that they
have been solid for us.
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Ryan Goldberg
Sent: Saturday, February 05, 2011 2:02 PM
To: WISPA General List
Cc: WISPA
They are my first choise
Sent via DROID on Verizon Wireless
-Original message-
From: Rubens Kuhl rube...@gmail.com
To: WISPA General List wireless@wispa.org
Sent: Sat, Feb 5, 2011 20:53:54 GMT+00:00
Subject: Re: [WISPA] Nera 11ghz Licensed
Ceragon has High Power ODUs and a very good
The reset switch only works when booting the unit. Connect the
Ethernet Cable and immediately press the Reset button (near the
device’s RJ45 connector) for 10 seconds.
And yes, the openmesh stuff does work, but stick to the pico2hp hardware.
ryan
On Fri, Feb 4, 2011 at 3:57 PM, Charles N Wyble
They started failing at 0F.Temps got to -25F in a few places.
I'm running the R52 cards in ARC Wireless enclosures. Prebuilt by my
vendor. Someone on another list suggested using a more powerful card
as the extra heat is enough to keep the board warm.
They are all running fine now, but
How cold? It has gotten to probably -10 since I started deployment of 411s.
Other than lightning, which damaged things other than the RB411, I
haven't had a problem.
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
On 2/5/2011 12:41 PM, Matt Larsen - Lists wrote:
I
I have looked at Dragonwave but I was having problems getting 5 nines on the
longer links even using 6 foot dishes. I was hoping that Nera with higher
transmit power might get me over the hump. Initially I do not need GigE but
I likely need the option to upgrade to near GigE with near zero
Using link planning utilities, I've had difficulty in arranging 5x 9s,
but not overloading the receiver on lower modulations.
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
On 2/5/2011 4:35 PM, Matt wrote:
I have looked at Dragonwave but I was having problems
I have had problems with SR9 cards when cold. On a few units, also in
the Arc enclosure, I have put 2 14-volt light bulbs in series and
powered them from the 24 volt POE to the 411. Not a problem since then
with the 2 I have tried this on.
On 2/5/2011 5:04 PM, Matt Larsen - Lists wrote:
I’m interested.
Chris
From: Kevin Sullivan
Sent: Wednesday, February 02, 2011 4:05 PM
To: WISPA General List
Subject: [WISPA] Remote monitoring/ remote reboot
Hello,
We've been working on building a remote monitoring/remote reboot board for
awhile now, mostly for internal use. It runs on
26 matches
Mail list logo
