We are having some issues lately on a couple of sites. AC mains is dropping
below 90 vac, anyone recommends a good Voltage Regulator?
Gino A. Villarini
President
Aeronet Wireless Broadband Corp.
www.aeronetpr.com
@aeronetpr
___
Wireless mailing
Apc battery backup. They will trim and boost for you.
We have a site that drops to 100vac in the winter when the heater kicks on
(old building and wiring :-/ ) the apc boost the load to 120.
On Monday, November 10, 2014, Gino Villarini g...@aeronetpr.com wrote:
We are having some issues
You can do a battery backup unit, like suggested by Sean H.
However to answer your question, APC makes a whole line of Voltage Regulators,
which are the product to fix this type of issue.
http://www.ebay.com/sch/i.html?_from=R40_trksid=p2050601.m570.l1313_nkw=apc+voltage+regulators_sacat=0
We have a APC ups on site, problem is voltage drops below the UPS threshold (90
vac) I need something that would regulate from 60-70 vac upwards
Gino A. Villarini
President
Aeronet Wireless Broadband Corp.
www.aeronetpr.com
@aeronetpr
From: Sean Heskett af...@zirkel.usmailto:af...@zirkel.us
Faisal do you use these. I have tried them in the past and when they are
working to handle enough clean power for a whole tower they seem to get really
hot.
I also do not recommend running them off a poor generator to get cleaner power.
The one I had melted after 2 hours.
Steven Barnes
GM
We found when using Tripplite UPS the battery would eventually go dead. The
UPS would use battery power to boost the voltage, but remain on battery for a
period of time (about a minute) to ensure the voltage would be stable. About
the time it switched back we would get another drop. It never
Gino, that sounds like the issue we had... have your electric company check to
see if you are dropping a phase at the transformer servicing you.
From: Gino Villarini
Sent: Monday, November 10, 2014 7:06 AM
To: WISPA General List
Subject: Re: [WISPA] AC Voltage Regulator??
We have a APC ups
Does anyone have a simple solution for when the circuit-breaker gets
kicked? I would very much like to have the system call me on the phone
to let me know when the server has lost power. Does anyone have a cheap
way to solve this?
___
Wireless mailing
Then look for AVR (Automatic Voltage Regulators)... and pick one based on the
specs..
e.g.
http://www.ebay.com/itm/POWERBRIGHT-SVC3000-VOLTAGE-REGULATOR-3000-WATT-AUTOMATIC-SERVO-MOTOR-AC-NEW-/321211901033?pt=US_Power_Inverters_hash=item4ac9b8a46
9
Regards.
Faisal Imtiaz
Snappy Internet
I have used the LR-1200 to have clean power in-doors on the bench (When we used
to do computer work).
And yes they get very hot... if you are going to deploy them in locations where
there is not good ventilation, I suggest you size them with a factor of 2 or
3... i.e. if you need 600va load
Plug in a Sitemonitor and use a battery backup. With Powercode you can use
PagerDuty to do a phone call.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Nov 10, 2014 10:21 AM, OOLLC-Support supp...@oregononline.net wrote:
Does anyone have a
Doing this is more of an method than a product.
If you have dual power supply server, then you can plug one psu on battery
backup, and the other on ac main... monitor the status of PSU via snmp... is
one example
If you are using Mikrotik routers, you can use the dual power feature on
them
Would going to a DC site with a fixed output voltage fix this?
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
- Original Message -
From: Gino Villarini g...@aeronetpr.com
To: WISPA General List wireless@wispa.org
Sent: Monday, November 10, 2014
You can also use an Online UPS instead of the more traditional type. Online
means the UPS is running the load off of the battery at all times. The AC
charger is supplying enough power to power your load as well as keep the
battery charged. They're designed to provide a stable output when the
PagerDuty.com and Pingdom. Use Pingdom to ping the server, have it
create an incident in PagerDuty when that happens. PagerDuty will call
your phone.
Will cost you $18 a month.
On 11/10/2014 09:20 AM, OOLLC-Support wrote:
Does anyone have a simple solution for when the circuit-breaker gets
Using a UPS that maintains Internet access it can be setup to send an SNMP
trap that a monitoring system (ZenOSS/SolarWinss/etc) can generate an EMAIL
or text message from.
On Nov 10, 2014 9:21 AM, OOLLC-Support supp...@oregononline.net wrote:
Does anyone have a simple solution for when the
He wants a phone call...
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Mon, Nov 10, 2014 at 11:32 AM, Tim Way t...@way.vg wrote:
Using a UPS that maintains Internet access it can be setup to send an SNMP
trap that a monitoring system
Nobody wants a phone call. ;-)
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
- Original Message -
From: Josh Luthman j...@imaginenetworksllc.com
To: WISPA General List wireless@wispa.org
Sent: Monday, November 10, 2014 10:37:42 AM
Subject: Re:
or plug a cheap cpe in the ac outlet... run a ping monitor to it... when power
is off pings stop..
From: Josh Luthman
Sent: Monday, November 10, 2014 7:35 AM
To: WISPA General List
Subject: Re: [WISPA] When the power goes off
Plug in a Sitemonitor and use a battery backup. With Powercode
I have 7 Ubnt devices, roughly 35 watts and one dumb 8 port switch. Figure
the load is maybe 50 watts after everything is said and done.
APC has 8x 12v*8ah batteries (or 768whr)
Shouldn't the run time be closer to 15 hours? I am getting 30-40 minutes.
I can't imagine the unit is that power
Have you checked the actual power draw on the ac with something like a kill
a watt?
On Nov 10, 2014 11:04 AM, Josh Luthman j...@imaginenetworksllc.com
wrote:
I have 7 Ubnt devices, roughly 35 watts and one dumb 8 port switch.
Figure the load is maybe 50 watts after everything is said and done.
The APC is pulling 1.87a @ 122v. There's no way 228 watts of Ubnt is on
that tower, I figured the rest was keeping the batteries up.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Mon, Nov 10, 2014 at 12:06 PM, Adair Winter
When the FCC issued the Report and Order (3.65
ROhttps://apps.fcc.gov/edocs_public/attachmatch/FCC-05-56A1.pdf) for the
3650-3700 MHz band in March of 2005, it set power limits in a manner not widely
understood by many in the WISP community, as it based the limits for fixed
operations on a
Drop in Mikrotik MAP, put it on a IP, and place it on the same circuit
with a IP without UPS. When it goes off-line, your monitoring system
tells you MAP without UPS is off-line, you know you don't have utility
power, what we do if you don't hae sitemonitors etc.. Simple, cheap..
Dennis
Screw a phone c all, but text is simple!
Dennis Burgess, CTO, Link Technologies, Inc.
den...@linktechs.net mailto:den...@linktechs.net – 314-735-0270 –
www.linktechs.net http://www.linktechs.net
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf
Of Josh
Techs can sleep through a txt message though. A little more difficult to
sleep through a phone call but I do know it happens.
On Mon, Nov 10, 2014 at 2:38 PM, Dennis Burgess dmburg...@linktechs.net
wrote:
Screw a phone c all, but text is simple!
Dennis Burgess, CTO, Link Technologies, Inc.
Yep.. In dude you can set it up to resend alerts every 5 min or
whatever till its up, but one way or the other they will sleep though it
.lol.
Dennis Burgess, CTO, Link Technologies, Inc.
den...@linktechs.net mailto:den...@linktechs.net - 314-735-0270 -
www.linktechs.net
That's why we use PagerDuty. Supports escalations as well, if the guy
really does sleep through a constantly ringing phone for 30 minutes.
On 11/10/2014 01:43 PM, can...@believewireless.net wrote:
Techs can sleep through a txt message though. A little more difficult
to sleep through a phone
part --
An HTML attachment was scrubbed...
URL:
http://lists.wispa.org/pipermail/wireless/attachments/20141110/8b5ec423/atta
chment-0001.html
--
Message: 3
Date: Mon, 10 Nov 2014 14:43:43 -0500
From: can...@believewireless.net p...@believewireless.net
On 11/10/14, 1:43 PM, can...@believewireless.net wrote:
Techs can sleep through a txt message though. A little more difficult to
sleep through a phone call but I do know it happens.
Android - Handcent SMS - Settings - Notification Settings - enable
reminders - number of reminders keep
iOS has had repeat message alerts for years
On Monday, November 10, 2014, Scott lamb...@lambertfam.org wrote:
On 11/10/14, 1:43 PM, can...@believewireless.net javascript:; wrote:
Techs can sleep through a txt message though. A little more difficult to
sleep through a phone call but I do
John,
We might be able to help them out with at least 25Mbps.
Our coverage locator is here:
http://www.aircloudcom.com/internet-availability/
Jerry Richardson
airCloud Communications
On Sat, Nov 8, 2014 at 6:39 AM, John Thomas jtho...@quarnet.com wrote:
And I know someone in San Ramon that
We use the Prowl application for sending notifications to iPhones. It's really
neat app that allows you the send push notifications/alerts to iOS devices. We
use it for outage and network alerts.
It has one alert tone that keeps beeping for a while and it's super annoying.
You can use those
33 matches
Mail list logo
