Barber" <[EMAIL PROTECTED]>
To: "'WISPA General List'"
Sent: Monday, January 23, 2006 8:47 PM
Subject: RE: [WISPA] Outdoor Ethernet Splice
You can also fill the end around the o-rings with silicon to
eliminate any
place for water to pool if they happen to be moun
Barber" <[EMAIL PROTECTED]>
To: "'WISPA General List'"
Sent: Monday, January 23, 2006 8:47 PM
Subject: RE: [WISPA] Outdoor Ethernet Splice
You can also fill the end around the o-rings with silicon to eliminate any
place for water to pool if they happen to be mounted verti
I haven't used these, but someone on one of these lists pointed them
out a while back.
http://www.alliedelec.com/Search/ProductDetail.asp?SKU=565-0107
I am going to order some in one of these days. They look good to me.
John Vogel
Mark Nash wrote:
>Anyone have recommendations on products you
Behalf Of Marlon K. Schafer
Sent: Monday, January 23, 2006 9:41 PM
To: WISPA General List
Subject: Re: [WISPA] Outdoor Ethernet Splice
I always put in 3 or 4 feet of extra cat 5 at the radio end :-P.
That's the same connector as sb uses. They are nice but make sure they sit
horrizontal as water
CTED]>
To: "WISPA General List"
Sent: Monday, January 23, 2006 7:53 PM
Subject: Re: [WISPA] Outdoor Ethernet Splice
I haven't used these, but someone on one of these lists pointed them
out a while back.
http://www.alliedelec.com/Search/ProductDetail.asp?SKU=565-0107
I am goin
, OR 97448
http://www.uwol.net
541-998-
541-998-5599 fax
- Original Message -
From: "J. Vogel" <[EMAIL PROTECTED]>
To: "WISPA General List"
Sent: Monday, January 23, 2006 7:53 PM
Subject: Re: [WISPA] Outdoor Ethernet Splice
I haven't used these, but someone
I haven't used these, but someone on one of these lists pointed them
out a while back.
http://www.alliedelec.com/Search/ProductDetail.asp?SKU=565-0107
I am going to order some in one of these days. They look good to me.
John Vogel
Mark Nash wrote:
>Anyone have recommendations on products you
sage-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Justin Wilson
Sent: Monday, January 23, 2006 10:23 PM
To: wireless@wispa.org
Subject: Re: [WISPA] Outdoor Ethernet Splice
This is not an actual splice. It's a bulkhead connector. Save yourself
trouble and just re-run
This is not an actual splice. It's a bulkhead connector. Save yourself
trouble and just re-run the cable. You will have a much better life, trust
me on this one.
Justin
--
Justin S. Wilson <[EMAIL PROTECTED]>
---
MTIN.NET High Speed Wireless
Phone: 765.762.2851
Web : www.mtin.net
AOLIM:
Tom DeReggi
Sent: Monday, January 23, 2006
4:31 PM
To: WISPA General List
Subject: Re: [WISPA] Outdoor
Ethernet Splice
I don't think I'd use it for an
inline splice personally.
A Short Cat5 cable is fixed to one
side of the device.
Tom DeReggi
RapidDSL & Wireless, In
Sent: Monday, January 23, 2006 2:22
PM
Subject: Re: [WISPA] Outdoor Ethernet
Splice
Tom, would you please confirm...can these be used
for both bulkhead connections on a pass-through into and enclosure AND an
inline splice without an enclosure?
Thanks!
Ma
Mark,
http://www.alliedelec.com/Search/ProductDetail.asp?SKU=565-0107&SEARCH=b
ulgin&ID=&DESC=PX0777%2FUTP
These work well and come with different sized grommets for use with
different diameter cable. They are about 1/3 more cost than the ones on
wisp-router.
Todd Barber
Skylink Broadband Int
-
*From:* Tom DeReggi <mailto:[EMAIL PROTECTED]>
*To:* WISPA General List <mailto:wireless@wispa.org>
*Sent:* Monday, January 23, 2006 11:18 AM
*Subject:* Re: [WISPA] Outdoor Ethernet Splice
Yes they work well.
ONly one thing... The Bulkhead Nut looks identicl
-5599
fax
- Original Message -
From:
Tom
DeReggi
To: WISPA General List
Sent: Monday, January 23, 2006 11:18
AM
Subject: Re: [WISPA] Outdoor Ethernet
Splice
Yes they work well.
ONly one thing... The Bulkhead Nut looks
identicle to the Nut for the other
List
Sent: Monday, January 23, 2006 1:58
PM
Subject: Re: [WISPA] Outdoor Ethernet
Splice
This looks intresting. Anyone use these
first hand?
-Richard M.
- Original Message -
From:
Scott Reed
To: WISPA General List
Sent: Monday, January 23,
al Message -
*From:* Scott Reed <mailto:[EMAIL PROTECTED]>
*To:* WISPA General List <mailto:wireless@wispa.org>
*Sent:* Monday, January 23, 2006 12:32 PM
*Subject:* Re: [WISPA] Outdoor Ethernet Splice
Would this work?
http://www.wisp-router.com/product_info.php?cP
This looks intresting. Anyone use these first
hand?
-Richard M.
- Original Message -
From:
Scott Reed
To: WISPA General List
Sent: Monday, January 23, 2006 12:32
PM
Subject: Re: [WISPA] Outdoor Ethernet
Splice
Would this work? http://www.wisp-router.com
Would this work?
http://www.wisp-router.com/product_info.php?cPath=38&products_id=389
Scott Reed
Owner
NewWays
Wireless Networking
Network Design, Installation and Administration
www.nwwnet.net
-- Original Message
---
From: "Mark Nash" <[EMAIL PROTECTED]>
18 matches
Mail list logo