On Fri, 3 Aug 2007, David E. Smith wrote:
The 192 (I don't think I've ever needed nine Ethernet ports on one
board) is a MIPS chip, the same as the Routerboard 500s, so in
theory it should work. I'm not Mikrotik, so I can't confirm this,
but it SHOULD work...
It's the same chip as the 100
On Fri, 3 Aug 2007, Travis Johnson wrote:
And even if they do, that doesn't make a complete radio system FCC
compliant... only their board.
No, but it is a GOOD first step toward creating certified systems.
If I were to try to build a certified system on the older boards,
I'd have to spend
Maybe someone can post the link to the FCC docs showing their certification?
Also, you will notice their PoE only supports up to 28VDC now, rather
than 48VDC like the RB532. They probably couldn't get the boards to pass
FCC at 48V.
Travis
Microserv
Butch Evans wrote:
On Fri, 3 Aug 2007,
Are you finding v3 to be a stable, functioning OS right now? I attempted
to load it on a 532 board about two months ago and the board would
reboot or lock-up about every 3-5 days. I put 2.9.40 back and it has
been up solid since then.
I did see about a 10% improvement on the wireless speeds
Subject: Re: [WISPA] MT announces RB192 and RB333
On Fri, 3 Aug 2007, Travis Johnson wrote:
And even if they do, that doesn't make a complete radio system FCC
compliant... only their board.
No, but it is a GOOD first step toward creating certified systems. If I
were to try to build a certified
PROTECTED]
Sent: 04 August 2007 19:13
To: WISPA General List
Subject: Re: [WISPA] MT announces RB192 and RB333
Maybe someone can post the link to the FCC docs showing their certification?
Also, you will notice their PoE only supports up to 28VDC now, rather than
48VDC like the RB532. They probably
Computing Solutions
http://www.ics-il.com
- Original Message -
From: Butch Evans [EMAIL PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Saturday, August 04, 2007 1:06 PM
Subject: Re: [WISPA] MT announces RB192 and RB333
On Fri, 3 Aug 2007, Travis Johnson wrote
Am I correct in reading that both of these new boards will require v3 of
the OS? I have yet to see a stable, production worthy v3 release. :(
Travis
Microserv
Mike Hammett wrote:
To quote normis:
Announcing RB333 and RB192, two new RouterBOARD products beginning to reach distributors at the
Travis Johnson wrote:
Am I correct in reading that both of these new boards will require v3 of
the OS? I have yet to see a stable, production worthy v3 release. :(
The 192 (I don't think I've ever needed nine Ethernet ports on one
board) is a MIPS chip, the same as the Routerboard 500s, so in
Subject: Re: [WISPA] MT announces RB192 and RB333
Am I correct in reading that both of these new boards will require v3 of
the OS? I have yet to see a stable, production worthy v3 release. :(
Travis
Microserv
Mike Hammett wrote:
To quote normis:
Announcing RB333 and RB192, two new RouterBOARD
Did I notice on both of those boards, an FCC compliance and CE logo?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Mike Hammett
Sent: Friday, August 03, 2007 12:30 PM
To: WISPA General List
Subject: Re: [WISPA] MT announces RB192 and RB333
The 192
Subject: RE: [WISPA] MT announces RB192 and RB333
Did I notice on both of those boards, an FCC compliance and CE logo?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Mike Hammett
Sent: Friday, August 03, 2007 12:30 PM
To: WISPA General List
Subject: Re
Message - From: Doug Ratcliffe [EMAIL PROTECTED]
To: 'WISPA General List' wireless@wispa.org
Sent: Friday, August 03, 2007 1:21 PM
Subject: RE: [WISPA] MT announces RB192 and RB333
Did I notice on both of those boards, an FCC compliance and CE logo?
-Original Message-
From: [EMAIL
13 matches
Mail list logo
