Re: [WISPA] X86 low power board w/3 or more ethernet
What do you consider low power? THe PowerRouter 732 will operate at GigE speeds, 7 GigE Interfaces and consumes around 80 watts. --- Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer WISPA Board Member - wispa.org Link Technologies, Inc -- Mikrotik WISP Support Services WISPA Vendor Member Office: 314-735-0270 Website: http://www.linktechs.net LIVE On-Line Mikrotik Training Author of Learn RouterOS -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of MDK Sent: Wednesday, November 18, 2009 4:33 PM To: WISPA General List Subject: [WISPA] X86 low power board w/3 or more ethernet Looking for an x86 compatible board of some kind with at least 3 or (better) more ethernet ports. Anyone have suggestions? Needs to have enough cpu power to route full 100m ethernet speed. gigE would be even better. I've not found such a beast... but I need one where there's no ac power, no climate control... WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] X86 low power board w/3 or more ethernet
Low power is 10 watts or less. This site runs on solar/wind power.The amount of power available is very limited. I've been looking at multiport ethernet card/mini-itx board combinations to do the trick... Awkward physically, and a little on the large size for power consumption, though the ALIX mini-itx is quite attractive for that. -- From: Dennis Burgess dmburg...@linktechs.net Sent: Thursday, November 19, 2009 7:34 AM To: WISPA General List wireless@wispa.org Subject: Re: [WISPA] X86 low power board w/3 or more ethernet What do you consider low power? THe PowerRouter 732 will operate at GigE speeds, 7 GigE Interfaces and consumes around 80 watts. --- Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer WISPA Board Member - wispa.org Link Technologies, Inc -- Mikrotik WISP Support Services WISPA Vendor Member Office: 314-735-0270 Website: http://www.linktechs.net LIVE On-Line Mikrotik Training Author of Learn RouterOS -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of MDK Sent: Wednesday, November 18, 2009 4:33 PM To: WISPA General List Subject: [WISPA] X86 low power board w/3 or more ethernet Looking for an x86 compatible board of some kind with at least 3 or (better) more ethernet ports. Anyone have suggestions? Needs to have enough cpu power to route full 100m ethernet speed. gigE would be even better. I've not found such a beast... but I need one where there's no ac power, no climate control... WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] X86 low power board w/3 or more ethernet
I've bought these to run routerOS very successfully: http://rackmountmart.stores.yahoo.net/newrmexshor1.html looks like they have a newer faster version too. I haven't tried this yet. http://rackmountmart.stores.yahoo.net/nermexsh1ura.html As you can see they are fanless and have a laptop style DC power supply in the case. I'm sure it could be removed so you could supply your own DC power. There are many DC-DC converters for these sort applications as people use mini-itx computers in boats, cars, etc... On Wed, Nov 18, 2009 at 02:33:26PM -0800, MDK wrote: Looking for an x86 compatible board of some kind with at least 3 or (better) more ethernet ports. Anyone have suggestions? Needs to have enough cpu power to route full 100m ethernet speed.gigE would be even better. I've not found such a beast... but I need one where there's no ac power, no climate control... WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- /* Jason Philbrook | Midcoast Internet Solutions - Wireless and DSL KB1IOJ| Broadband Internet Access, Dialup, and Hosting http://f64.nu/ | for Midcoast Mainehttp://www.midcoast.com/ */ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] X86 low power board w/3 or more ethernet
They make ITX Mini ITX boards (Geocode or ATOM Processor) which can be powered with 12vdc Depending on what form factor you are limited to you can add additional Ethernet port using a 4 port PCI card. Or Something like this: http://www.orbitmicro.com/global/jad3rtlanp-lf-p-4653.html Regards Faisal Imtiaz Computer Office Solutions Inc. /SnappyDSL.net Ph: (305) 663-5518 x 232 -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of MDK Sent: Wednesday, November 18, 2009 5:33 PM To: WISPA General List Subject: [WISPA] X86 low power board w/3 or more ethernet Looking for an x86 compatible board of some kind with at least 3 or (better) more ethernet ports. Anyone have suggestions? Needs to have enough cpu power to route full 100m ethernet speed.gigE would be even better. I've not found such a beast... but I need one where there's no ac power, no climate control... WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] X86 low power board w/3 or more ethernet
We have purchased different units from this page and they work well. http://www.orbitmicro.com/global/network-appliances-c-283_288.html They will usually work with you on price if you have quantity needs. http://www.axiomtek.com/Products/ListProduct.asp?ptype1=224Ptype2=225P type3=173 You can get those products from various distributors on their site. One of their products might look familiar if you have seen the powerouter. Regards, Chuck Hogg Shelby Broadband 502-722-9292 ch...@shelbybb.com http://www.shelbybb.com -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Faisal Imtiaz Sent: Wednesday, November 18, 2009 5:56 PM To: 'WISPA General List' Subject: Re: [WISPA] X86 low power board w/3 or more ethernet They make ITX Mini ITX boards (Geocode or ATOM Processor) which can be powered with 12vdc Depending on what form factor you are limited to you can add additional Ethernet port using a 4 port PCI card. Or Something like this: http://www.orbitmicro.com/global/jad3rtlanp-lf-p-4653.html Regards Faisal Imtiaz Computer Office Solutions Inc. /SnappyDSL.net Ph: (305) 663-5518 x 232 -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of MDK Sent: Wednesday, November 18, 2009 5:33 PM To: WISPA General List Subject: [WISPA] X86 low power board w/3 or more ethernet Looking for an x86 compatible board of some kind with at least 3 or (better) more ethernet ports. Anyone have suggestions? Needs to have enough cpu power to route full 100m ethernet speed. gigE would be even better. I've not found such a beast... but I need one where there's no ac power, no climate control... WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] X86 low power board w/3 or more ethernet
http://www.pcengines.ch/alix2d13.htm - Original Message - From: MDK rea...@muddyfrogwater.us To: WISPA General List wireless@wispa.org Sent: Wednesday, November 18, 2009 2:33 PM Subject: [WISPA] X86 low power board w/3 or more ethernet Looking for an x86 compatible board of some kind with at least 3 or (better) more ethernet ports. Anyone have suggestions? Needs to have enough cpu power to route full 100m ethernet speed.gigE would be even better. I've not found such a beast... but I need one where there's no ac power, no climate control... WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] X86 low power board w/3 or more ethernet
We've had excellent results with these. Cheap, powerful and reliable. George -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Tom Sharples Sent: Wednesday, November 18, 2009 8:00 PM To: WISPA General List Subject: Re: [WISPA] X86 low power board w/3 or more ethernet http://www.pcengines.ch/alix2d13.htm - Original Message - From: MDK rea...@muddyfrogwater.us To: WISPA General List wireless@wispa.org Sent: Wednesday, November 18, 2009 2:33 PM Subject: [WISPA] X86 low power board w/3 or more ethernet Looking for an x86 compatible board of some kind with at least 3 or (better) more ethernet ports. Anyone have suggestions? Needs to have enough cpu power to route full 100m ethernet speed.gigE would be even better. I've not found such a beast... but I need one where there's no ac power, no climate control... WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
