Re: [WISPA] cable needs for relief efforts?
Mac, Ken says get hold of Jim Patient and have him get in touch with Bizsyscon. They have N-Connectors in stock according to their last email. Why don't you have them ship directly to Tim? We are looking out for you! Dawn Mac Dearman wrote: Tim, I will pay the freight and pay for the ends if you will make me up about 20 lmr400 NMale - Nmale jumpers 3' long. You opened your mouth and I stepped up. :-) That is the one thing that we have been in short supply of this whole campaign. I have used up all my fittings and have ran across a small box of fittings in Ponchatoula yesterday that is still packed in my truck - - - so I think I have the fittings to make some more, but if you are willing - - - it would sure be NICE Thanks Bro! Mac Dearman Maximum Access, LLC. www.inetsouth.com www.radioresponse.org 318-728-8600 - Rayville 318-303-4229 318-303-4231 318-450-4349 - Monroe, La 318-303-4227 - NOC Tim Wolfe wrote: Hey Gang(Mac, Johnny O etc..), Since I can not be there right this moment, I can still make cables(LMR 400, CAT5). If You have a need for any LMR400 jumpers, or CAT5 cables that are pre-made let me know. I have about 1300 ft of LMR400 and quite a bit of CAT5. Just tell me the lengths etc. and I can make them and overnite'um to Ya' and that is one less thing You have to worry about. Ask and You shall receive!(All free of charge, as I wouldn't have it any other way! :-) ) -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] cable needs for relief efforts?
OK, If You are out there reading this, and You have the crimp on connectors(No screw on types please) N male, I could use some. If every WISP out there would just send me 6 connectors, I can crank out 3 foot jumpers until the cows come home. I have the heat shrink, and I solder the center pin and I have enough of that stuff. I just need connectors. I was in my truck, and I will have enough ends to make around 12 or so. If You have them, my address is as follows: WaveCrazy Communications 71 Hain Ave Lebanon PA 17046 -- Timothy E Wolfe WaveCrazy Communications http://www.wavecrazy.net 717-274-8730 office 717-273-6122 fax 717-507-2221 cell -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] cable needs for relief efforts?
Mac, You will pay nothing!. I will make them up today if possible, but more than likely, it will be Sat. till I get them done. Consider it a done thing. I will look at my connectors also, and if need be, I will order more and keep knocking them out! -- Timothy E Wolfe WaveCrazy Communications http://www.wavecrazy.net 717-274-8730 office 717-273-6122 fax 717-507-2221 cell -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] cable needs for relief efforts?
Tim, I will pay the freight and pay for the ends if you will make me up about 20 lmr400 NMale - Nmale jumpers 3' long. You opened your mouth and I stepped up. :-) That is the one thing that we have been in short supply of this whole campaign. I have used up all my fittings and have ran across a small box of fittings in Ponchatoula yesterday that is still packed in my truck - - - so I think I have the fittings to make some more, but if you are willing - - - it would sure be NICE Thanks Bro! Mac Dearman Maximum Access, LLC. www.inetsouth.com www.radioresponse.org 318-728-8600 - Rayville 318-303-4229 318-303-4231 318-450-4349 - Monroe, La 318-303-4227 - NOC Tim Wolfe wrote: Hey Gang(Mac, Johnny O etc..), Since I can not be there right this moment, I can still make cables(LMR 400, CAT5). If You have a need for any LMR400 jumpers, or CAT5 cables that are pre-made let me know. I have about 1300 ft of LMR400 and quite a bit of CAT5. Just tell me the lengths etc. and I can make them and overnite'um to Ya' and that is one less thing You have to worry about. Ask and You shall receive!(All free of charge, as I wouldn't have it any other way! :-) ) -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] cable needs for relief efforts?
Hey Gang(Mac, Johnny O etc..), Since I can not be there right this moment, I can still make cables(LMR 400, CAT5). If You have a need for any LMR400 jumpers, or CAT5 cables that are pre-made let me know. I have about 1300 ft of LMR400 and quite a bit of CAT5. Just tell me the lengths etc. and I can make them and overnite'um to Ya' and that is one less thing You have to worry about. Ask and You shall receive!(All free of charge, as I wouldn't have it any other way! :-) ) -- Timothy E Wolfe WaveCrazy Communications http://www.wavecrazy.net 717-274-8730 office 717-273-6122 fax 717-507-2221 cell -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/