There is a bug in DTR/RTS PTT in RC1 that will be fixed in the next release.
de Mike W9MDB
On Friday, May 15, 2020, 08:46:46 PM CDT, lgtngstk
wrote:
Just to report, I am also having this issue as well.
On Wed, May 13, 2020 at 7:04 AM Bill Somerville wrote:
On 13/05/2020 00:37,
Just to report I am also having this issue as well.
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Just to report, I am also having this issue as well.
On Wed, May 13, 2020 at 7:04 AM Bill Somerville
wrote:
> On 13/05/2020 00:37, David Tiller wrote:
>
> Dear devs,
>
> I began using the latest release candidate today and love the early
> decodes, but I noticed a few things that seemed to be
Mike,
I gave it a go. I assume the 'master' branch is the one you want - I saw your
commits :-)
I installed it in a local dir, not in /usr or /opt:
./configure --prefix=/Users/dtiller/hamlib-master-prefix
--exec-prefix=/Users/dtiller/hamlib-master-eprefix
Here's the output:
WITH CACHE SET
On 13/05/2020 13:22, David Tiller wrote:
Thanks for the info, Bill and Mike!
I added the cache param and tried it with and without the -m parameter
- with the -m 3027 it failed, without it the command 'worked', but DID
NOT KEY THE RIG.
Hi David,
unfortunately it has not worked, the result
Are you able to compile hamlib?
de Mike W9MDB
On Wednesday, May 13, 2020, 07:48:25 AM CDT, David Tiller
wrote:
Thanks for the info, Bill and Mike!
I added the cache param and tried it with and without the -m parameter - with
the -m 3027 it failed, without it the command 'worked',
Thanks for the info, Bill and Mike!
I added the cache param and tried it with and without the -m parameter - with
the -m 3027 it failed, without it the command 'worked', but DID NOT KEY THE RIG.
WITHOUT -m 3027
dtiller$ ./Applications/wsjtx.app/Contents/MacOS/rigctl-wsjtx -p
On 13/05/2020 12:37, David Tiller wrote:
Bill,
Thanks for the speedy reply!
I see that the command specifies a rig - like I said, I only use the
given serial port for PTT, not for CAT commands. I'm not sure if that
changes anything.
The CAT port is /dev/cu.usbserial-1412*00*, but I set the
On 13/05/2020 00:37, David Tiller wrote:
Dear devs,
I began using the latest release candidate today and love the early
decodes, but I noticed a few things that seemed to be not working
reliably under OSX.
My Setup: OSX 10.13.6, Icom 756PRO, and a RigExpert Standard. This
setup works
Installed [wsjt-devel] 2.2.0 RC1 on latest update of MacOs HiSierra with Icom
IC7300. Only issue is with tune power level memory. Not sure I’m setting things
properly. When all else fails, read the manual. Thanks for the effort everyone
put into development of such a fine piece of software. Ken
10 matches
Mail list logo
