Hi Michael,
I found the issue. When I use Win4Icom, I normally run com0com to create
virtual serial port pairs. These pairs are used in Win4Icom as virtual CAT
ports and WSJT-X uses one of these ports. I recently decided to switch to
VSPE for the port emulation. It appears that VSPE creates
Was transferred to 441 to reply to A25RU but after one transmit segment the
app shifted me to 741. Looks like a busted Q. Is there a reason the app
shifted to 741?
Thanks;
W2PKY
--
Bill Barrett
___
wsjt-devel mailing list
On 3/19/21 5:10 PM, Bill Barrett wrote:
Hi Bill and all,
Was transferred to 441 to reply to A25RU but after one transmit segment the
app shifted me to 741. Looks like a busted Q. Is there a reason the app
shifted to 741?
According to the picture, you are using the DXpedition mode. Therefore
Hi Yukio-san,
Thanks for reporting this issue, and for the fix! It will be correct in
the next release.
-- 73, Joe, K1JT
On 3/18/2021 9:22 PM, Yukio JG1APX wrote:
Hello wsjtx development team,
I reported the behavior of FT4 VFO split operation at "VHF and
submode features"
On 19/03/2021 16:10, Bill Barrett wrote:
Was transferred to 441 to reply to A25RU but after one transmit
segment the app shifted me to 741. Looks like a busted Q. Is there a
reason the app shifted to 741?
Thanks;
W2PKY
--
Bill Barrett
Hi Bill,
that is expected behaviour. The reason is to
Hello Bill & Claud-
Thanks for taking the time to explain the strategy for handling the
circumstances of missing a reply from the Fox.
Makes a lot of sense and is well thought out.
73;
Bill
On Fri, Mar 19, 2021 at 12:27 PM Bill Somerville
wrote:
> On 19/03/2021 16:10, Bill Barrett wrote:
>
>
In the past few days I experienced a loss of transmit audio after
leaving WSJT-X 2.4.0-rc3 (64-bit Win10) open on my station laptop for
several hours in FT8 mode. I'm using my IC-7610's built in USB codec
and CAT transmit. In the last two instances, rather than closing and
restarting the
Hi Mike
I have noticed the same issue. The workaround is to not select pulse as the
sound card but select the sound card by name in WSJTX settings. Pavucontrol
did not help when pulse alone was selected.
73
Glenn VE9GJ
On March 18, 2021 1:55:12 PM ADT, m...@g4wnc.com wrote:
>Apologies to
Hi Glenn,
Thanks for tip, that workaround fixed it!
I guess there’s still a problem with WSJT-X as I think it should be ok to
select pulse as the input/output device. It certainly seems to work ok with
other apps such as FLDIGI and QSSTV.
If this is not the correct setting, perhaps