Re: [wsjt-devel] wsjt-x Program hung and not responding
> On May 2, 2021, at 8:28 PM, Bill Frantz wrote: > > I had been operating FT8 on 15M and 40M. I powered down my K3 (upgraded with > the internal sound card) and got the "Rig Control Error" message. This is normal for every computer I’ve had. That’s the error message when the port goes away (by powering down the K3). Sounds normal. It can’t communicate with the rig when it is shut down so it gives you an error. I always shut down the program before unplugging the USB cable to the radio. It runs across my desk for easy access in case of T-Storm. The program still closes when I tell it to ignore, but works fine when I plug the USB cable back in and reload the program. You should be fine as soon as you turn the radio back on and restart the program. Just don’t shut the rig down without unloading WSJT-X. Gary - - AG0N___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
[wsjt-devel] wsjt-x Program hung and not responding
wsjt-x hung -- not responding I had been operating FT8 on 15M and 40M. I powered down my K3 (upgraded with the internal sound card) and got the "Rig Control Error" message. I think I clicked "Cancel", closed the lid on my MacBook Pro and took the computer back to my apartment. When I got there, wsjt-x was still running but not responding. I used "Force quit" to blow it away and saved the crash report from the Apple crash reporter. wsjt-x 2.3.1 MacOS 10.14.6 Since the crash report is huge (27500+ lines) I won't send it to the list unless someone says I should. :-) 73 Bill AE6JV --- Bill Frantz| When all else fails: | Periwinkle (408)348-7900 | Voice and CW. | 150 Rivermead Rd #235 www.pwpconsult.com | | Peterborough, NH 03458 ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
[wsjt-devel] Transmitting partway through a time-slice?
Whenever I double-click on a line in the left-hand window to answer a CQ, or click "Enable TX", [WSJT-X v2.3.1 0e7224], my radio keys up immediately, even if I'm most of the way through a 15-second timeslice. While I undertand that it's OK if the first few seconds of my transmission are missed in this fashion, I suspect that the last couple of seconds wouldn't be enough to decode anything useful. Is there a setting for "don't transmit if the timeslice has already started'? I was advised last time to not click until just before the beginning of the timeslice, but that's hard to arrange... I remember asking about this a while ago and thought it was an acknowledged misfeature that was going to be Fixed In The Next Release, but it's (still) there. Am I going something wrong, or do I have a setting misconfigured? Thanks! 73, Willie N1JBJ ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
