Since you were asking about the IC705, I loaded the new dll and tried it with
my X6100. It worked as it should from 6m > 160m and back with no problems. It
also worked fine with my ANAN running Thetis. I will leave the new dll
installed and let you know if something shows later.
BTW, I did
Both were connected to dummy loads, not antenna.
I just repeated now with Multi- Control knob setting power to zero watts output
on both the IC-7300 and the IC-705 radios with same results.
Question for you, was I to use the WSJT-X v2.7.0-rc1 as originally released or
was there another
Sounds like RFI Problems due to noise on the USB cable
Tests
If problems are occurring only during transmit:
#1 Reduce power to zero and see if the problem stops -- if it does stop
than it is definitely RFI. You will see certain higher power levels on certain
bands that cause problems.
*_Testing IC-7300/IC-705, IC-7610 Results_*
Mike, on the IC-7610 so far the new *libhamlib-4.dll* seems to work.
On the IC-705 and the IC-7300 however:
The WSJT-X program /*crashes */if I start either radio from 7.074 MHz or
higher and THEN change the band setting drop down to 80m e.g., 3.573