Hi Mike,
hanks for the info. But I have already tested both COM ports. I had seen in
device manager and there COM ports 3 and 4 were assigned. I have tested both
but always with the Hamlib error message. I'm going to compare this evening
again with the settings that Uwe, DG2YCB sent me. I may
That makes it sound like it's the wrong port.
You should have two COM ports -- the Extended port is the one you want.
Mike W9MDB
On Monday, August 28, 2023 at 10:07:56 AM CDT, on4ckt--- via wsjt-devel
wrote:
Hello, today I tried to install WSJT-X v2.7.0-rc2 on my laptop
Hello Rudy,
Your settings for the FT-991 seem to be fine. I have the same settings
here (and 028=RS232C), and everything works well. How is your PTT
connected? I use CAT. If you have DTR or RTS selected, make sure the COM
port for that is different from the CAT serial port. Is COM3 the right
Hello, today I tried to install WSJT-X v2.7.0-rc2 on my laptop Windows10 and
connect via CAT to my Yaesu FT991. But I get the following error message in
WSJT-X.
Hamlib error: rig_settings_get_path: path=.hamlib_settings
rig_settings_load_all: settings_file (.hamlib_settings): No such file
New hamlib for installation directions
#1 Shut down WSJTX
#2 Download either the 32-bit or 64-bit DLL matching the 32/64-bit version of
WSJTX -- hopefully your browser doesn't block it but may warn you multiple
times.
If you can do a "Save As" you can save it directly in the appropriate WSJTX
When using Shift-click on the waterfall to set the TX frequency, the "Rig
Control Error" popup is displayed. Clicking the "Show Details..." button shows
the following error information:
Hamlib error: port_wait_for_data_direct(733): timeout=1,0
port_wait_for_data_direct(742): timeout=1,0
