Dave just posted a new alpha, I'll test with it first to see if it's
resolved.
Thanks,
Richard
KF5OIM
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
That is it. For some reason in the beta it had rts/cts flow control, while in
the GA, it did not, even though the Rc was installed over the GA. Thank you
From: Adrian
Sent: Friday, January 26, 2024 1:42 PM
To: WSJT software development
Cc: kgross jensalt.com
Subject: Re: [wsjt-devel]
I will have a look at that later on. Thank you Morris, 73’s Nic
On 30 Jan 2024, at 15:52, Morris Wideman via wsjt-devel
wrote:
Hi Nick
Another thing you could check is USB Power management this is found under each
USB service in Device manager open properties and
uncheck the high lighted
Hi Willie,
Yes the 9700 has that function but when I did that the problem didn’t happen.
It does seem quite random and intermittent. I suspected it might have been rfi
as when I moved the 432 MHz ant in the roof the problem seemed to go away. But
i have seen it back again and I haven’t
Many thanks to all who picked up this thread and especially to Uwe for
providing a path forward.
I will get the revised software and report back if the problem persists.
I have also seen the problem mentioned by Joe.
This is a fantastic app, Uwe, so please accept my compliments!
73, Ed
W1KOK
Hi David,
Interesting that you have seen this for a long time.
My old Lenovo laptop didn’t show any signs of this happening driving the 9700
via usb and my old Sony laptop using just audio from the speaker also did not
show any signs of this happening when driving the ts2000.
This was on
The other Night during the NS Sprint, I had the enable button right
clicked (Orange) where it should call any CQing station not already worked.
Yet I could see at least 10 stations CQing, and it never tried to call
any of them it just say there cycle after cycle.
Joe WB9SBD
.
A Contest 40
Hi Nick
Another thing you could check is USB Power management this is found under each
USB service in Device manager open properties and
uncheck the high lighted line. This has been know to cause USB issues. You may
find more than one of these to check.
73 Morris WA4MIT On Tuesday, January
I don’t think that it is always a USB problem.
I have been aware of very brief “holes” in the audio output for many
years/versions. In fact, more often than not I see a brief dropout – shown by
the RF output power dropping (with ALC glitch) and drop out of audio on monitor.
But my audio
Hi Reino,
Thanks for the explanation. That makes sense. Appreciate the information.
--Dennis NE6I
From: Reino Talarmo via wsjt-devel
Sent: Monday, January 29, 2024 10:24 PM
To: 'WSJT software development'
Cc: Reino Talarmo
Subject: Re: [wsjt-devel] Decoding Anomaly
Hi Dennis,
Is there a monitor function on your rig that you can use to listen to the Tx
audio? Then you’d at least know which side of the audio/RF divide to look at…
73, Willie N1JBJ
> On Jan 30, 2024, at 7:25 AM, Nic Sears via wsjt-devel
> wrote:
>
> Hi there, Nic G3YEG here.
>
> I have been using
Thanks Neil, suspected that but audio stream on other output seemed ok. Cannot check usb stream, will try and find an update. Amazed an eme QSO works ok with holes!!NicOn 30 Jan 2024 13:03, Neil via wsjt-devel wrote:
Hi Nic, I had this problem with random
gaps of about 2 seconds in
Hi Nic, I had this problem with random gaps of about 2 seconds in
transmission audio with an earlier release. It was nothing to do with
wsjt-x, the root problem was a buggy USB 3.0 driver for the internal
card in the machine (i7/32GB/Win10). I updated the driver and that
fixed it. It took a
Hi Uwe,
Ed should check the Ini file. there are three entries in there that might
create a problem in the program if somehow they conflict.
I know I ran into this problem when I wrote/updated my program for the blind
hams.
TxFirst=trueCallFirst=1ForceCallFirst=true
73,
Sam W2JDB
On
Sam, the mail service had hick-up for some reason. My mails were delayed hours.
73, Reino OH3mA
From: Sam W2JDB via wsjt-devel [mailto:wsjt-devel@lists.sourceforge.net]
Sent: Tuesday, January 30, 2024 2:46 PM
To: WSJT software development
Cc: Sam W2JDB
Subject: Re: [wsjt-devel] Response
I think he had this enabled, Sam. Really have no idea why it didn't work
for him, because his slightly older "231202" version should also do the
job. But the best is if Ed tries again with the upcoming "240202" code.
Just to make sure it's not something that has already been fixed.
73 de Uwe,
Sorry about this. My email service did not show any emails for a while. Seems I
have a problem here.
73,
Sam W2JDB
On Tuesday, January 30, 2024 at 07:44:17 AM EST, Sam W2JDB via wsjt-devel
wrote:
Hi Uwe,
I sent this email earlier, somehow it did not go through.
Hi Ed,
Make sure you
Hi Uwe,
I sent this email earlier, somehow it did not go through.
Hi Ed,
Make sure you have the right option selected "CQ:First"
73,
Sam W2JDB
On Tuesday, January 30, 2024 at 06:53:47 AM EST, Uwe, DG2YCB via wsjt-devel
wrote:
Hi Ed,
At the moment, I have no explanation why it
If the new machine is a Dell look for "WAV" services in the services manager
and disable them.
Mike W9MDB
On Tuesday, January 30, 2024 at 06:28:24 AM CST, Nic Sears via wsjt-devel
wrote:
Hi there, Nic G3YEG here.
I have been using wsjt for quite a few years both ft8 (hf, vhf and
Hi there, Nic G3YEG here.
I have been using wsjt for quite a few years both ft8 (hf, vhf and uhf) and
q65-60b on 432 eme and have never consciously notice the power output of any of
my previous rigs varying during ft8 or q65 tx cycles.
Recently I Started using a new laptop with much higher
Hi Ed,
At the moment, I have no explanation why it doesn't work with the
"231202" i+ version. What I can say is that it definitely works well
with the current "240106" code, as well as with the new "240202" version
that will be released on Friday this week. I recommend that you download
this
21 matches
Mail list logo
