Please place this file as described below
https://www.dropbox.com/s/t52ngcalsgnpm8m/wsjtx_log_config.ini?dl=0
C:\Users\[username]\AppData\Local\WSJT-X
The WSJT-X_Rigcontrol.log file will be in the same location
Here's a youtube video showing Windows users howto --
Please place this file as described below
https://www.dropbox.com/s/t52ngcalsgnpm8m/wsjtx_log_config.ini?dl=0
C:\Users\[username]\AppData\Local\WSJT-X
The WSJT-X_Rigcontrol.log file will be in the same location
Here's a youtube video showing Windows users howto --
Usually on click ok, the Config pane pops up on radio tab so you can
reconfigure , so you don't see that then, ok ?
It would be interesting to confirm a program interface like FLrig,
Commander or HRD works,
or rigctld/Hamlib interface , rather than actual radio choice.
73
vk4tux
On
The Rig Control Error window is never displayed.
But to answer your question... going into the settings and doing a 'Test
CAT' does not restore the connection.
-Scott AA5AM
On Wed, Mar 20, 2024 at 7:11 PM Adrian wrote:
> Re below ; If you click 'ok', and then are shown the wsjtx radio
Re below ; If you click 'ok', and then are shown the wsjtx radio
settings tab, does 'Test CAT' restore the cat connection ?
73
vk4tux
On 21/3/24 09:52, Scott Armstrong via wsjt-devel wrote:
The Rig Control Error pop-up message is not raised.
image.png
When CAT is restored by turning on
Hi All,
I have encountered a problem running 2.7.0-rc4 with Hamlib version
[image: image.png]
This impacts an Icom IC-756ProII and IC-746. The issue is not observed when
running a IC-9700
The problem is also observed running 2.7.0-rc3 with the new Hamlib version
The workaround is to roll back
