I will have a look at that later on. Thank you Morris, 73’s Nic
On 30 Jan 2024, at 15:52, Morris Wideman via wsjt-devel
wrote:
Hi Nick
Another thing you could check is USB Power management this is found under each
USB service in Device manager open properties and
uncheck the high lighted
Hi Willie,
Yes the 9700 has that function but when I did that the problem didn’t happen.
It does seem quite random and intermittent. I suspected it might have been rfi
as when I moved the 432 MHz ant in the roof the problem seemed to go away. But
i have seen it back again and I haven’t
, G4YTL
From: Nic Sears via wsjt-devel [mailto:wsjt-devel@lists.sourceforge.net]
Sent: 30 January 2024 14:11
To: WSJT software development
Cc: Nic Sears
Subject: Re: [wsjt-devel] Wsjt 2.7.0 rc3 apparent holes in transmission
Thanks Neil, suspected that but audio stream on other output seemed ok
Hi Nick
Another thing you could check is USB Power management this is found under each
USB service in Device manager open properties and
uncheck the high lighted line. This has been know to cause USB issues. You may
find more than one of these to check.
73 Morris WA4MIT On Tuesday, January
January 2024 14:11
To: WSJT software development
Cc: Nic Sears
Subject: Re: [wsjt-devel] Wsjt 2.7.0 rc3 apparent holes in transmission
Thanks Neil, suspected that but audio stream on other output seemed ok. Cannot
check usb stream, will try and find an update. Amazed an eme QSO works ok
Is there a monitor function on your rig that you can use to listen to the Tx
audio? Then you’d at least know which side of the audio/RF divide to look at…
73, Willie N1JBJ
> On Jan 30, 2024, at 7:25 AM, Nic Sears via wsjt-devel
> wrote:
>
> Hi there, Nic G3YEG here.
>
> I have been using
Thanks Neil, suspected that but audio stream on other output seemed ok. Cannot check usb stream, will try and find an update. Amazed an eme QSO works ok with holes!!NicOn 30 Jan 2024 13:03, Neil via wsjt-devel wrote:
Hi Nic, I had this problem with random
gaps of about 2 seconds in
Hi Nic, I had this problem with random gaps of about 2 seconds in
transmission audio with an earlier release. It was nothing to do with
wsjt-x, the root problem was a buggy USB 3.0 driver for the internal
card in the machine (i7/32GB/Win10). I updated the driver and that
fixed it. It took a
If the new machine is a Dell look for "WAV" services in the services manager
and disable them.
Mike W9MDB
On Tuesday, January 30, 2024 at 06:28:24 AM CST, Nic Sears via wsjt-devel
wrote:
Hi there, Nic G3YEG here.
I have been using wsjt for quite a few years both ft8 (hf, vhf and
Hi there, Nic G3YEG here.
I have been using wsjt for quite a few years both ft8 (hf, vhf and uhf) and
q65-60b on 432 eme and have never consciously notice the power output of any of
my previous rigs varying during ft8 or q65 tx cycles.
Recently I Started using a new laptop with much higher
10 matches
Mail list logo
