Re: [wsjt-devel] wsjt-x Program hung and not responding
The issue is not that the program threw an error code. Of course it should throw an error. The issue is that it didn't exit cleanly and was hung and unresponsive on the computer at least 15 minutes later when I used force quit to blow it away. 73 Bill AE6JV On 5/3/21 at 6:45 AM, n2...@windstream.net (James Shaver (N2ADV)) wrote: To put Gary’s response another way: Imagine you’re taking to someone standing on front of you and, mid-conversation, the person to whom you’re speaking suddenly disappears without a trace. I think you’d throw an error code, too. :) Jim S. N2ADV On May 3, 2021, at 12:32 AM, Gary McDuffie wrote: On May 2, 2021, at 8:28 PM, Bill Frantz wrote: I had been operating FT8 on 15M and 40M. I powered down my K3 (upgraded with the internal sound card) and got the "Rig Control Error" message. This is normal for every computer I’ve had. That’s the error message when the port goes away (by powering down the K3). Sounds normal. It can’t communicate with the rig when it is shut down so it gives you an error. I always shut down the program before unplugging the USB cable to the radio. It runs across my desk for easy access in case of T-Storm. The program still closes when I tell it to ignore, but works fine when I plug the USB cable back in and reload the program. You should be fine as soon as you turn the radio back on and restart the program. Just don’t shut the rig down without unloading WSJT-X. Gary - - AG0N ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel - ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel --- Bill Frantz| If I lose, you’ll never | Periwinkle (408)348-7900 | see me again. - Donald | 150 Rivermead Rd #235 www.pwpconsult.com | Trump, September 19, 2020 | Peterborough, NH 03458 ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] wsjt-x Program hung and not responding
To put Gary’s response another way: Imagine you’re taking to someone standing on front of you and, mid-conversation, the person to whom you’re speaking suddenly disappears without a trace. I think you’d throw an error code, too. :) Jim S. N2ADV > On May 3, 2021, at 12:32 AM, Gary McDuffie wrote: > > > >> On May 2, 2021, at 8:28 PM, Bill Frantz wrote: >> >> I had been operating FT8 on 15M and 40M. I powered down my K3 (upgraded with >> the internal sound card) and got the "Rig Control Error" message. > > This is normal for every computer I’ve had. That’s the error message when > the port goes away (by powering down the K3). Sounds normal. It can’t > communicate with the rig when it is shut down so it gives you an error. I > always shut down the program before unplugging the USB cable to the radio. > It runs across my desk for easy access in case of T-Storm. The program still > closes when I tell it to ignore, but works fine when I plug the USB cable > back in and reload the program. You should be fine as soon as you turn the > radio back on and restart the program. Just don’t shut the rig down without > unloading WSJT-X. > > Gary - - AG0N > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] wsjt-x Program hung and not responding
> On May 2, 2021, at 8:28 PM, Bill Frantz wrote: > > I had been operating FT8 on 15M and 40M. I powered down my K3 (upgraded with > the internal sound card) and got the "Rig Control Error" message. This is normal for every computer I’ve had. That’s the error message when the port goes away (by powering down the K3). Sounds normal. It can’t communicate with the rig when it is shut down so it gives you an error. I always shut down the program before unplugging the USB cable to the radio. It runs across my desk for easy access in case of T-Storm. The program still closes when I tell it to ignore, but works fine when I plug the USB cable back in and reload the program. You should be fine as soon as you turn the radio back on and restart the program. Just don’t shut the rig down without unloading WSJT-X. Gary - - AG0N___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
[wsjt-devel] wsjt-x Program hung and not responding
wsjt-x hung -- not responding I had been operating FT8 on 15M and 40M. I powered down my K3 (upgraded with the internal sound card) and got the "Rig Control Error" message. I think I clicked "Cancel", closed the lid on my MacBook Pro and took the computer back to my apartment. When I got there, wsjt-x was still running but not responding. I used "Force quit" to blow it away and saved the crash report from the Apple crash reporter. wsjt-x 2.3.1 MacOS 10.14.6 Since the crash report is huge (27500+ lines) I won't send it to the list unless someone says I should. :-) 73 Bill AE6JV --- Bill Frantz| When all else fails: | Periwinkle (408)348-7900 | Voice and CW. | 150 Rivermead Rd #235 www.pwpconsult.com | | Peterborough, NH 03458 ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel