Re: [wsjt-devel] wsjt-x2.6.0-rc4-win64 map65 portaudio issue

2022-09-18 Thread piRshared.org via wsjt-devel 
   It helps a very lot, thank you.  I think I will see where eme is half a solar cycle into the future.It’s amazingly better than 4 solar cycles ago.Bradshaw  Sent from Proton Mail for iOS On Sun, Sep 18, 2022 at 7:23 AM, Gary Simpkins via wsjt-devel  wrote:




Hi Bradshaw
Sorry its a bit longer than one sentence.

The antenna is 4 x 12 element crossed yagi array. I use a SDRplay
  Duo for the reciever with 2 masthead LNAs (EME3s from
  anntena-amplifiers (based in Serbia)). I use a IC-9700 for
  transmitter with a Gemini linear. The antenna is 4 x 12 element
  crossed yagi.
Today EME can be achived with smaller antennas. I live in a very
  RF noisy area, so cannot do as well as others on 2M. Week-ends are
  better for me as long as the electric fence in the paddock is not
  activated. I am think  linrad may help a bit with its smart noise
  blanker, but have not set this up yet. For software I use the
  SDRPlay UNO, and also Davids RSPduoEME prog, that allows the phase
  of the two duo recievers to be matched. This should improve the
  adaptive operation of my MAP65 setup.
There are many ways to set up an EME station. Much easier than in
  1970. A long single horizontal antenna, LNA and a SSB TCVR with
  wsjt-x software can work the big stations like HP9Q,

Hope this helps.
Regards
Gary G8EOH

On 18/09/2022 11:30, piRshared.org via wsjt-devel wrote:



  Gary, May I please have a one sentence list of your EME
transmitter, receiver and antennas? Thanks, bradshaw K1te, in
buzzards bay ma.  
  
  
  I have been dreaming about EME since a slide
show in derry New Hampshire in 1974, when the equipment antennas
and liquid nitrogen cooled preamplifier was three times my high
school physics teacher annual salary,  Tnx es 73
  
  
  
Sent from Proton Mail for iOS
  
  
  
  
  
  On Sat, Sep 17, 2022 at 1:55 PM, Gary Simpkins via wsjt-devel 
  wrote:
   Hi All

I hope I have joined the group correctly. If so thankyou.

I have recenlty upgraded WSJT-x to wsjtx-2.5.4-win64. I use
MAP65 for EME.
The audio selection in MAP65 only offered MME. No good for
4channel
audio required for Xpol solutions.
The 64bit version used libportaudio-2.dll 685kb
I tried the 32bit version. This worked. There was a new
libportaudio-i686-w64-mingw32.static.dll. 332kb
I solved the wsjtx-2.5.4-win64 version by replacing the new
libportaudio-2.dll 665kb with an old libportaudio-2.dll 342kb.
This
worked and MAP was working with 4channel audio again.
I have now tried the latest version for testing
wsjtx-2.6.0-rc4-win32 
works well and the gain feature is great.
I had the same problem with the 64bit version, fixed with the
same
solution. The gain geature work here too.

I know what I did was not very professional, and really the
64bit
portaudio.dll needs to be looked at.
But thought you may need to know my temporary fix.


Regards

Gary G8EOH




___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
  
  
  
  
  
  ___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel









publicKey - piRshared.org@protonmail.ch - f2353cfd.asc
Description: application/pgp-keys


signature.asc
Description: OpenPGP digital signature
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] wsjt-x2.6.0-rc4-win64 map65 portaudio issue

2022-09-18 Thread Gary Simpkins via wsjt-devel 

Hi Bradshaw

Sorry its a bit longer than one sentence.

The antenna is 4 x 12 element crossed yagi array. I use a SDRplay Duo 
for the reciever with 2 masthead LNAs (EME3s from anntena-amplifiers 
(based in Serbia)). I use a IC-9700 for transmitter with a Gemini 
linear. The antenna is 4 x 12 element crossed yagi.


Today EME can be achived with smaller antennas. I live in a very RF 
noisy area, so cannot do as well as others on 2M. Week-ends are better 
for me as long as the electric fence in the paddock is not activated. I 
am think  linrad may help a bit with its smart noise blanker, but have 
not set this up yet. For software I use the SDRPlay UNO, and also Davids 
RSPduoEME prog, that allows the phase of the two duo recievers to be 
matched. This should improve the adaptive operation of my MAP65 setup.


There are many ways to set up an EME station. Much easier than in 1970. 
A long single horizontal antenna, LNA and a SSB TCVR with wsjt-x 
software can work the big stations like HP9Q,


Hope this helps.

Regards

Gary G8EOH

On 18/09/2022 11:30, piRshared.org via wsjt-devel wrote:

Gary, May I please have a one sentence list of your EME transmitter, 
receiver and antennas? Thanks, bradshaw K1te, in buzzards bay ma.


I have been dreaming about EME since a slide show in derry New 
Hampshire in 1974, when the equipment antennas and liquid nitrogen 
cooled preamplifier was three times my high school physics teacher 
annual salary,  Tnx es 73


Sent from Proton Mail for iOS


On Sat, Sep 17, 2022 at 1:55 PM, Gary Simpkins via wsjt-devel 
 wrote:

Hi All

I hope I have joined the group correctly. If so thankyou.

I have recenlty upgraded WSJT-x to wsjtx-2.5.4-win64. I use MAP65 for 
EME.

The audio selection in MAP65 only offered MME. No good for 4channel
audio required for Xpol solutions.
The 64bit version used libportaudio-2.dll 685kb
I tried the 32bit version. This worked. There was a new
libportaudio-i686-w64-mingw32.static.dll. 332kb
I solved the wsjtx-2.5.4-win64 version by replacing the new
libportaudio-2.dll 665kb with an old libportaudio-2.dll 342kb. This
worked and MAP was working with 4channel audio again.
I have now tried the latest version for testing wsjtx-2.6.0-rc4-win32
works well and the gain feature is great.
I had the same problem with the 64bit version, fixed with the same
solution. The gain geature work here too.

I know what I did was not very professional, and really the 64bit
portaudio.dll needs to be looked at.
But thought you may need to know my temporary fix.


Regards

Gary G8EOH




___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] wsjt-x2.6.0-rc4-win64 map65 portaudio issue

2022-09-18 Thread Gary Lane via wsjt-devel 
Evening 

My present favourite Radio is - Yaesu FTdx101MD, antenna is a trapped vertical, 
op is 1-200Watts depending on conditions..

 Regards Gary VK4OO



> On 18 Sep 2022, at 20:30, piRshared.org via wsjt-devel 
>  wrote:
> 
> Gary, May I please have a one sentence list of your EME transmitter, receiver 
> and antennas? Thanks, bradshaw K1te, in buzzards bay ma.  
> 
> I have been dreaming about EME since a slide show in derry New Hampshire in 
> 1974, when the equipment antennas and liquid nitrogen cooled preamplifier was 
> three times my high school physics teacher annual salary,  Tnx es 73
> 
> Sent from Proton Mail for iOS
> 
> 
> On Sat, Sep 17, 2022 at 1:55 PM, Gary Simpkins via wsjt-devel 
> mailto:wsjt-devel@lists.sourceforge.net>> 
> wrote:
>> 
>> Hi All
>> 
>> I hope I have joined the group correctly. If so thankyou.
>> 
>> I have recenlty upgraded WSJT-x to wsjtx-2.5.4-win64. I use MAP65 for EME.
>> The audio selection in MAP65 only offered MME. No good for 4channel
>> audio required for Xpol solutions.
>> The 64bit version used libportaudio-2.dll 685kb
>> I tried the 32bit version. This worked. There was a new
>> libportaudio-i686-w64-mingw32.static.dll. 332kb
>> I solved the wsjtx-2.5.4-win64 version by replacing the new
>> libportaudio-2.dll 665kb with an old libportaudio-2.dll 342kb. This
>> worked and MAP was working with 4channel audio again.
>> I have now tried the latest version for testing wsjtx-2.6.0-rc4-win32 
>> works well and the gain feature is great.
>> I had the same problem with the 64bit version, fixed with the same
>> solution. The gain geature work here too.
>> 
>> I know what I did was not very professional, and really the 64bit
>> portaudio.dll needs to be looked at.
>> But thought you may need to know my temporary fix.
>> 
>> 
>> Regards
>> 
>> Gary G8EOH
>> 
>> 
>> 
>> 
>> ___
>> wsjt-devel mailing list
>> wsjt-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>  f2353cfd.asc>___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] wsjt-x2.6.0-rc4-win64 map65 portaudio issue

2022-09-18 Thread piRshared.org via wsjt-devel 
   Gary, May I please have a one sentence list of your EME transmitter, receiver and antennas? Thanks, bradshaw K1te, in buzzards bay ma.  I have been dreaming about EME since a slide show in derry New Hampshire in 1974, when the equipment antennas and liquid nitrogen cooled preamplifier was three times my high school physics teacher annual salary,  Tnx es 73 Sent from Proton Mail for iOS On Sat, Sep 17, 2022 at 1:55 PM, Gary Simpkins via wsjt-devel  wrote:  Hi AllI hope I have joined the group correctly.  If so thankyou.I have recenlty upgraded WSJT-x to wsjtx-2.5.4-win64. I use MAP65 for EME.The audio selection in MAP65 only offered MME. No good for 4channelaudio required for Xpol solutions.The 64bit version used libportaudio-2.dll  685kbI tried the 32bit version.  This worked. There was a newlibportaudio-i686-w64-mingw32.static.dll.  332kbI solved the wsjtx-2.5.4-win64 version by replacing the newlibportaudio-2.dll  665kb with an old libportaudio-2.dll 342kb. Thisworked and MAP was working with 4channel audio again.I have now tried the latest version for testing wsjtx-2.6.0-rc4-win32 works well and the gain feature is great.I had the same problem with the 64bit version, fixed with the samesolution. The gain geature work here too.I know what I did was not very professional, and really the 64bitportaudio.dll needs to be looked at.But thought you may need to know my temporary fix.RegardsGary  G8EOH___wsjt-devel mailing listwsjt-devel@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/wsjt-devel




publicKey - piRshared.org@protonmail.ch - f2353cfd.asc
Description: application/pgp-keys


signature.asc
Description: OpenPGP digital signature
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] wsjt-x2.6.0-rc4-win64 map65 portaudio issue

2022-09-17 Thread Gary Simpkins via wsjt-devel 

Hi All

I hope I have joined the group correctly.  If so thankyou.

I have recenlty upgraded WSJT-x to wsjtx-2.5.4-win64. I use MAP65 for EME.
The audio selection in MAP65 only offered MME. No good for 4channel 
audio required for Xpol solutions.

The 64bit version used libportaudio-2.dll  685kb
I tried the 32bit version.  This worked. There was a new 
libportaudio-i686-w64-mingw32.static.dll.  332kb
I solved the wsjtx-2.5.4-win64 version by replacing the new 
libportaudio-2.dll  665kb with an old libportaudio-2.dll 342kb. This 
worked and MAP was working with 4channel audio again.
I have now tried the latest version for testing wsjtx-2.6.0-rc4-win32  
works well and the gain feature is great.
I had the same problem with the 64bit version, fixed with the same 
solution. The gain geature work here too.


I know what I did was not very professional, and really the 64bit 
portaudio.dll needs to be looked at.

But thought you may need to know my temporary fix.


Regards

Gary  G8EOH




___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel