*_Testing IC-7300/IC-705, IC-7610 Results_*
Mike, on the IC-7610 so far the new *libhamlib-4.dll* seems to work.
On the IC-705 and the IC-7300 however:
The WSJT-X program /*crashes */if I start either radio from 7.074 MHz or
higher and THEN change the band setting drop down to 80m e.g., 3.573
Sounds like RFI Problems due to noise on the USB cable
Tests
If problems are occurring only during transmit:
#1 Reduce power to zero and see if the problem stops -- if it does stop
than it is definitely RFI. You will see certain higher power levels on certain
bands that cause problems.
Both were connected to dummy loads, not antenna.
I just repeated now with Multi- Control knob setting power to zero watts output
on both the IC-7300 and the IC-705 radios with same results.
Question for you, was I to use the WSJT-X v2.7.0-rc1 as originally released or
was there another
Since you were asking about the IC705, I loaded the new dll and tried it with
my X6100. It worked as it should from 6m > 160m and back with no problems. It
also worked fine with my ANAN running Thetis. I will leave the new dll
installed and let you know if something shows later.
BTW, I did