Hello Robert,
Ok, I hear what you're saying. All I can recommend at this point is to
enable the logging and debugging and see what those log files say. If
they don't say anything useful, I don't think I will have anything else
to offer here but maybe someone else could chime in with
David,
This usb cable is fine. This exact setup was working fine before I had to
rebuild the rpi and reinstall xastir.
Yes fully understand about using one interface entry at a time and yes the
script was setup using the TC command ( if I remember correctly) to switch
between the aprs12 and
Hello Robert,
I have the D72A connected to a RPi 4 via USB and have setup two interfaces in
Xastir,
One for read-only: where the D72A runs in normal APRS12 mode and one for
read-write
where the D72A runs in KISS mode (packet12)
Ok.. and I assume you understand you can only use one
David / All
I have the D72A connected to a RPi 4 via USB and have setup two interfaces in
Xastir,
One for read-only: where the D72A runs in normal APRS12 mode and one for
read-write
where the D72A runs in KISS mode (packet12)
The interface type is "Serial TNC w/GPS on AUX port /dev/ttyUSB0"
