Re: [Xastir] Xastir Digest, Vol 798, Issue 1

kef> From: Xastir on behalf of David Ranch Sent: Tuesday, April 25, 2023 2:45:28 PM To: Xastir - APRS client software discussion Subject: Re: [Xastir] Xastir Digest, Vol 798, Issue 1 Hello Robert, I have the D72A connected to a RPi 4 via USB and have setup two interfaces in Xastir

Re: [Xastir] Xastir Digest, Vol 798, Issue 1

:28 PM To: Xastir - APRS client software discussion Subject: Re: [Xastir] Xastir Digest, Vol 798, Issue 1 Hello Robert, > I have the D72A connected to a RPi 4 via USB and have setup two interfaces in > Xastir, > > One for read-only: where the D72A runs in normal APRS12 mode and one

Re: [Xastir] Xastir Digest, Vol 798, Issue 1

Hello Robert, I have the D72A connected to a RPi 4 via USB and have setup two interfaces in Xastir, One for read-only: where the D72A runs in normal APRS12 mode and one for read-write where the D72A runs in KISS mode (packet12) Ok.. and I assume you understand you can only use one

Re: [Xastir] Xastir Digest, Vol 798, Issue 1

David / All I have the D72A connected to a RPi 4 via USB and have setup two interfaces in Xastir, One for read-only: where the D72A runs in normal APRS12 mode and one for read-write where the D72A runs in KISS mode (packet12) The interface type is "Serial TNC w/GPS on AUX port /dev/ttyUSB0"

Re: [Xastir] Xastir Digest, Vol 798, Issue 1

Hello Robert, Can you tell us more here? What is showing the "ERROR" text? Is that shown on the D72's display? How are you interfacing the D72 to Xastir? As a KISS TNC? --David KI6ZHD On 04/20/2023 08:28 AM, ROBERT SWITZER wrote: Yes. In fact if anyone knows why my D72A interface

Re: [Xastir] Xastir Digest, Vol 798, Issue 1

Yes. In fact if anyone knows why my D72A interface always works for about 1 minute upon startup and then goes to ERROR, I would love to hear debugging ideas Robert KA2CZU Get Outlook for iOS From: Xastir on behalf of