Hey. I figured that this must have been a Gnome issue, but I find it on
KDE and other desktops. They all seem to have active corners and edges
nowadays. Whenever my mouse gets close to the corners or edges of the
screen, it magically gets a mind of its own and flies off to the corner
or sides.
Hi Kundu,
Try the following format while starting Xfbdev
*Xfbdev* [*:display*]** [*option*...]**
in options give *-2button* or *-3button* to emulate 2 or three button
mouse .
Best of luck.
On 2/6/08, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
sorry that I could not log on for a long
Please don't send me anymore offers
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: Re: [XFree86] Help: How to configure tinyx server for pc
CC: xfree86@xfree86.org
Date: Sun, 10 Feb 2008 11:48:51 +0530
Hi Kundu,
Try the following format while starting Xfbdev
Xfbdev [:display
sorry that I could not log on for a long time as I was working on some other
thing but here I am.
Thanks for your effort and time but I already have the links.
I read it somewhere that tinyX doesn't uses a config file but takes parameters
from command lines so I was thinking if anyone knows of
sorry that I could not log on for a long time as I was busy in some other task
but here I am .
Thanks Mark but I already have the links to my mouse
TinyX doesn't use any config files but takes the arguments from the command
lines so I am looking for some commands that can enable my mouse and
Hi
I have installed XFree86 4.7 and the Xfbdev, XVesa etc binaries are created.
Now when i run the Xvesa binary, the server starts but it is not configured
hence mouse and keyboard events are not accepted. so i get a grey screen and
my mouse and keyboards won't work.
Help me telling how to
On Tue, 22 Jan 2008, kundan das wrote:
I have installed XFree86 4.7 and the Xfbdev, XVesa etc binaries are created.
Now when i run the Xvesa binary, the server starts but it is not configured
hence mouse and keyboard events are not accepted. so i get a grey screen and
my mouse and keyboards
On Sun, 15 Apr 2007, Mehdi Tahanizadeh wrote:
I installed fullpackage of xserver on the fedora5 by Xinstall.sh.
but after full installation and running command of 'XFree86 -configuration'
i reboot computer but didn't start xserver.
I tried very much to install xfree86 but i couldn't .
please
hi
Please check the XF86Config file and check for the x pointer .
For that u can do it by
XFree86 -configure
and saveing the XF86config file in /etc/X11
Arun
Mehdi Tahanizadeh wrote:
Hello
I installed fullpackage of xserver on the fedora5 by Xinstall.sh.
but after full installation and
Hello,
I want to use chinese font for redhat 5.2 application (XFree86 3.3.5).
In /usr/X11R6/lib/X11/fonts/misc/fonts.alias, I find following entry:
hanzigb16st -isas-song ti-medium-r-normal--16-160-72-72-c-160-gb2312.1980-0
hanzigb24st -isas-song
On Thu, 11 Jan 2007, m gao wrote:
I want to use chinese font for redhat 5.2 application (XFree86 3.3.5).
In /usr/X11R6/lib/X11/fonts/misc/fonts.alias, I find following entry:
hanzigb16st -isas-song ti-medium-r-normal--16-160-72-72-c-160-gb2312.1980-0
hanzigb24st -isas-song
I've a problem when i install VMWare tools for Linux 2.4 kernel, i don't know how to resolve it! Yourinstruction'll bea greathelp to me!
Thank you very much!-- Hoàng Yến
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System
(protocol Version 11, revision 0, vendor release
Dear Sir,
I am having a problem in getting display in gui mode for Trident
3DImage9850 in hardware Pentium II 350 Mhz supported machine, i tried all
the ways in getting solution, Everything is ok when it goes to take gui
mode iam getting blank (black) screen and machine is getting hanged or
Hello did you search in the Internet for another people with your same
computer ? If you did it and doesn't help please send the file
/var/log/XFree86.0.log. You can also send the result of the next
command: lspci |grep -i trident and last also send the model of your
computer.
Thanks,
Please send the /var/log/XFree86.0.log file to this list.
Mark.
On Tue, 27 Jun 2006, Mohanraj Palanisamy wrote:
Dear Sir,
I am having a problem in getting display in gui mode for Trident
3DImage9850 in hardware Pentium II 350 Mhz supported machine, i tried all
Dear X friends:
Recent l want to check my driver whether it will properly work on Xorg 7.0
and Xorg7.1.
But when I log on the source web-site,
http://xorg.freedesktop.org/releases/, I found there is no single source tar
ball for Xorg7.0 and 7.1.
Does that mean I need to download each component of
I have a problem with my X, help me!Here is log (file attached)
Yahoo! Mail goes everywhere you do. Get it on your phone.
XFree86.0.log
Description: 1128613986-XFree86.0.log
To: xfree86@xfree86.org
Subject: [XFree86] Help!
Date: Mon, 15 May 2006 02:03:32 -0700 (PDT)
I have a problem with my X, help me!
Here is log (file attached)
-
Yahoo! Mail goes everywhere you do. Get it on your phone.
XFree86.0.log
On Thu, 11 May 2006, f.l. wrote:
im using xfree86 4.5.0,
i want to switch screen mode while xserver is running,
but the key combination not work,
however, ctrl-alt-backspace works,
You need to combine the two display subsections you have into one. I.e. ...
Section Screen
Identifier
You only have one mode to switch to. You need to have multiple
modes listed on the Modes line in the XF86Config. The first is
the default. ctrlalt+/- move through the rest. Eg.
Modes 1024x768 800x600 640x480
Mark.
On Thu, 11 May 2006, f.l. wrote:
hi,
im using xfree86 4.5.0,
i
hi,
im using xfree86 4.5.0,
i want to switch screen mode while xserver is running,
but the key combination not work,
however, ctrl-alt-backspace works,
please help.
many thanks.
XF86Config-4
Description: Binary data
I m trying to run the movie player which
is provided in trolltech site.
Its a c++ code where we are choosing
a file and it will play it.
But that movie player can run only .mng
media file in window platform and it can not run any media file in linux
platform or on the board.
The error what i got
Title:
I am buiding
Kdrive serverfor MIPS device.
I used XFree86
4.3.0, cross compilinghas beenfinished and I got a Xfbdev
binary.
When I ran it on
target, X-Windowwasdisplayed butUSB mouse didnt
work.
The
following is the host.def that I defined.
---Start---
#define HasFreetype2
I am told by Core 4 that in order to install the ATI driver
that I need, first I must upgrade to XFree86.
sh Xinstall.sh check tells me to download and install
Linux-ix86-glibc23, which I have done.
After installation, and running the configuration file, I
rebooted and ran startx.
I have an IBM PC 300 GL 6285-66U with S3 Trio OnBoard, 4MB video memory. The
chip is 86C366 (I'm sure about the 366 part, but might be crossing something
on the 86C.)
I've installed Mandrake and some other distributions and I typically get 16
color, 1024x768 or greater, etc. Live CD
help!
Thanks,
Satej
A starting point might be the NewYork Linux User's group.
www.nylug.org
MArk.
- Original Message -
From: Mark Vojkovich [EMAIL PROTECTED]
Date: Friday, November 25, 2005 0:42 am
Subject: Re: [XFree86] Help installing Nvidia GEForce FX 5200 on Red Hat
-
From: Mark Vojkovich [EMAIL PROTECTED]
Date: Friday, November 25, 2005 0:42 am
Subject: Re: [XFree86] Help installing Nvidia GEForce FX 5200 on Red Hat
linux7.1
The XFree86 version that shipped with RedHat 7.1 undoubtedly
predates your graphics hardware. You'll either need to update
The XFree86 version that shipped with RedHat 7.1 undoubtedly
predates your graphics hardware. You'll either need to update
to an XFree86 version that includes a driver for that card
(XFree86 4.4.0 or newer is recommended, but if I recall correctly,
4.3.0 might have worked on that card), or go
Hi X experts,
I am trying TinyX on a Xscale dev board. I cross
compiled Xfree4.5 and got Xfbdev, lib and fonts and
copied X11R6 to the /usr, copied X11 and fonts to
/etc.
I put some X programs such as xclock, twm, xterm in
/etc/X11/xinit/xinitrc, then run it by using Startx
--
I ran the install last night, things went smoothly, it auto selected
ATI Rage 128 Mobility as the card, and I believe this to be
correct. However, when I tried to login for the first time the
screen flickered and it spit up a message about not being able to start
Xserver, or something similar.
Greetings
I have a problem with my red hat Linux7.1 .
Every time the electricity switched off and my
computer shutdown ,then when i open the computer again
and try to boot Red Hat Linux i can't and get the
message tell me to enter root password to make
maintenace and after i do, i enter in the
Hello, I have new iBook with Tiger (10.4.2) and X11 (1.1 - XFree86 4.4.0). To log in to our server I tried both ssh -X [EMAIL PROTECTED] and ssh -Y [EMAIL PROTECTED]and no luck, cannot run emacs and so on. I'm getting the same message in both cases [EMAIL PROTECTED] emacs X11 connection rejected
Bonjour,
Ci-jont le fichier xfree86.O.log.
Pouvez-vous me donner une piste d'investigation.
Avec mes remerciements
Patrick
Patrick Altimani
Liberation
Paris
+33 1 44 72 17 72
http://www.liberation.fr
mailto:[EMAIL PROTECTED]
XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-3)
Tad
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Behalf Of Lance Duivenbode
Sent: Thursday, September 15, 2005 9:47 PM
To: xfree86@xfree86.org
Subject: Re: [XFree86] Help Installing
Hi Tad,
I'm also running Debian (testing) and I've also had some experience
I am installing XFree86 on my laptop. Pentium Three with Debian. I got
XFree86 Intstalled and now I am trying to run the configuration and I cant
do it. It will not recognize the command. I also tried hitting xStart and
that does not work either. Please help. What directory should I be in?
Thanks
Hi Tad,
I'm also running Debian (testing) and I've also had some experience
running on laptops so perhaps I can help you. What commands are you
trying to use?
By the way, to start X you will need to type 'startx' at the console -
not 'xStart'!
Lance
Tad Dixon wrote:
I am installing
, September 15, 2005 9:47 PM
To: xfree86@xfree86.org
Subject: Re: [XFree86] Help Installing
Hi Tad,
I'm also running Debian (testing) and I've also had some experience
running on laptops so perhaps I can help you. What commands are you
trying to use?
By the way, to start X you will need to type
you think.
Thanks
Tad
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Behalf Of Lance Duivenbode
Sent: Thursday, September 15, 2005 9:47 PM
To: xfree86@xfree86.org
Subject: Re: [XFree86] Help Installing
Hi Tad,
I'm also running Debian (testing) and I've also had some
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
Hi ,
I need your help to getting the x-windows from (ssh`ed from windows client):
The following error message depits as follows:
startx
Fatal server error:
Server is already active for display 0
If this server is no longer running, remove /tmp/.X0-lock
and start again.
When
On Wed, 13 Jul 2005, DOLLOFF, MATTHEW D. (MATT) (JSC-ER7) (NASA) wrote:
I am trying to add a new option to xf86Elo.c (elographics_drv.o) so that I
can set up the driver to deal with twin view monitors. I am not sure where
I can add the option in the source code so that when the XF86Config file
I am trying to add a new option to xf86Elo.c
(elographics_drv.o) so that I can set up the driver to deal with twin view
monitors. I am not sure where I can add the option in the source code so that
when the XF86Config file is parsed it recognizes the option as a valid option,
and then how
Your XFree86 version (4.2.0) predates your video card and is
too old to support it. You have two options: update to XFree86
4.4.0 or newer which comes with an XFree86-supported driver that
works with that card, or use NVIDIA's binary Linux driver from NVIDIA's
web site. The later is supported
I can't start the graphical server with Red Hat
Linux 8.0. I think there is a problem with the video card which is a
Chaintech nvidia GeForce FX 5200.
I've enclosed the XFree86.0.log and the XF86Config
files. Can you help me?
Thanks
XF86Config
Description: Binary data
XFree86.0.log
it is my problem, my linux cannot run xwindow :
Fatal Error :
Addscreen/screenlst failed for driver 0
.. can be found in the log file
var/log/xfree86.0.log
so, why can i do?
You should send your /var/log/XFree86.0.log file to the xfree86@xfree86.org
list so the problem can be diagnosed.
MArk.
On Thu, 2 Jun 2005, novi adipriyono
wrote:
it is my problem, my linux cannot run xwindow :
Fatal Error :
Help,
I have posted server messages and none of them make it to the group and
I do not get any confirmations. I do receive posts that other folks
make. When I check my status, every thing looks fine and if I ask for my
password to be emailed to me that works fine, but still no messages of
mine
You should send the /var/log/XFree86.0.log file to the xfree86@xfree86.org
mailing list. That file should have enough info to diagnose the problem.
Mark.
On Tue, 31 May 2005, Kathy wrote:
Hello,
I am trying install Linux 9.0, however, I think I selected a wrong
Hello,
I am trying install Linux 9.0, however, I think I selected a
wrong monitor mode, then it comes out the Blue and Green screen, said, Fatal
server error: no screens found. The only choice to enter is EXIT
Then after I press ENTER, it comes out only
YES NO choice, then I blindly
Hola that such I am installing freebsd and try to
form the environment KDE and me the following mistake appears with xfree86 they
can help me please, the mistake is the following one
FATAL SERVER ERROR:
XF86ENABLE IO: FAILED TO OPEN /DEV/IO FOR EXTENDEND
I/O
I wonder if anyone would be kind enough to direct me to where I can get the
drivers for a Touch Screen monitor - particually for the serial interface?
I have Core 3 of Fedora, and some elementary knowledge of Linux - but this is
out of my area.
Thanks for any info you can provide
/r
Al Saul
On Thu, Mar 31, 2005 at 08:10:10PM +0100, Alan Cooney wrote:
Hi, Im a relative neewb (1 month) to linux, and have just reinstalled
XFree86 in an attempt to get TV in working. I installed version 4.4.0
because I didn't realise there was a 4.5 version. I am now stuck with
a command promt. I would
Hi, Im a relative neewb (1 month) to linux, and have just reinstalled
XFree86 in an attempt to get TV in working. I installed version 4.4.0
because I didn't realise there was a 4.5 version. I am now stuck with
a command promt. I would give u my error file if I knew how to get
that. Please tell
I am trying to access your ftp server from the unix prompt because my x server is corrupted and I don't want to replace it and I don't want to loose information in the calendar application. what userid and password should I use, or please mail me a temporary one?
Thank you
Charles
Do you
Login is anonymous, password is your email address. This is
an internet standard.
Mark.
On Mon, 28 Mar 2005, charles williams wrote:
I am trying to access your ftp server from the unix prompt because my x
server is corrupted and I don't want to replace it and I
In the /etc/X11/XF86Config-4 file, replace Driver vga with
Driver sis. You are currently using the basic vga (ie. 640x480
in 16 colors) driver rather than the native SiS driver.
Mark.
On Sat, 26 Mar 2005, Andrew Spaccio wrote:
Hello,
I can not get xserver to start
Hello,
I can not get xserver to start up. I've included my
log file. I'm not sure what other information you
might like to have from me. Please advise.
Thanks,
Andrew
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection
How can i compile xfree86 on open server unix 5.0.6 ? Please Help me..
Do you Yahoo!?
Yahoo! Search presents - Jib Jab's 'Second Term'
On Fri, 14 Jan 2005 13:03:13 +0800 (CST)
[EMAIL PROTECTED] wrote:
linux: FC3
kernel: 2.6.10
XFree86:4.4.0
graphics card: ATI 9100
Please help me ~
Thank you very much!
There are a lot of comments in your log file that say it's using the built-in
linux: FC3
kernel: 2.6.10
XFree86:4.4.0
graphics card: ATI 9100
Please help me ~
Thank you very much!
--
http://sh.online.sh.cn/special/2004huati/
:
http://album.online.sh.cn
http://telmedia.allyes.com/banner/xinqite.htm
Hi all,
I've tried searching the mailing list archives for a similar problem,
but couldn't come up with anything.
Included below are my XF86Config file and the log file. I'm unable to
startx on this machine with the attached config. However, I know the
hardware works since Knoppix is able to
Title: Help.
Im running an Intel P350, 256mb ram, 40gig hd.
New installation of RH linux FC3
Installed XFree86 v4.3.0 using Xinstall.sh script
After the install I ran XFree86 -xf86config /root/XF86Config.new to test the server and it comes back with the following errors:
(EE)
On Sun, 9 Jan 2005 14:12:47 -0600
Jesse Nichols wrote:
Im running an Intel P350, 256mb ram, 40gig hd.
New installation of RH linux FC3
Installed XFree86 v4.3.0 using Xinstall.sh script
After the install I ran XFree86 -xf86config /root/XF86Config.new to test
the server and it comes back
Hi
here the file log of the error that i get ...attached
plz help
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.21-0.13mdksmp i686 [ELF]
Build Date: 12 March 2003
Before reporting problems, check
Hello,
I have the notebook IBM
ThinkPad/R40 and install Linux RH 7.3 with the kernel
2.4.20.
My the problem is that is not
start Xserver, when its monitor is IBM ThinkPad 1024x768 TFT
LCD.
Know you help me? I attach the
err.log file.
Sincerely,
Julius
Rajcani.
I have the notebook IBM ThinkPad/R40 and install Linux RH 7.3 with the
kernel 2.4.20.
My the problem is that is not start Xserver, when its monitor is IBM
ThinkPad 1024x768 TFT LCD.
Know you help me? I attach the err.log file.
I think I see the problem in the following lines from your log
Hi,
Recently I installed Linux RedHat 7.2 on my HP d330 uT machine (Intel 865G chipset).
startx fails andI don't have the Intel 865G chipset in the Xconfiguration.
Could you please help me.
Regards,
Santosh.
Do you Yahoo!?
Yahoo! Mail - Easier than ever with enhanced search. Learn more.
Hi friends. I am doing a project about X Window. In this project, I try to
create two independent cursors which
controlled by two mice in one monitor.
Currently, I have used ``X Input Extension'' (libXi) to receive event from the
second mouse. I have removed
``AlwaysCore'' option from
On Thu, 9 Dec 2004, Chaitat Piriyasatit wrote:
Hi friends. I am doing a project about X Window. In this project, I try to
create two independent cursors which
controlled by two mice in one monitor.
The X-Window system doesn't support more than one cursor.
You can create a sprite with
1)VERSION:
$ XFree86 -version
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted
to [EMAIL PROTECTED] Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS
Hi ,
I am trying to accelerate my graphic card in linux but i'm having some
problems:
I have XFree 4.4.0, the newest drivers of ATI and DRI download in the
'Sun Looking GLass Website'
But when i reboot the system and x starts i have a black screen.
Can anyone help me?
In attach i have the XFree
PM
Subject: Re: [XFree86] help urgent
On Thursday 04 November 2004 21:50, abdelmoula hicham wrote:
when insatlling linux 7.1 on my PC, no grafic interface, i've only
console
to deal whith. when i tape xstart i've received this message (look for
log
file) . XFree86 version is 4.0.3 /Xwindow
hi
when insatlling linux 7.1 on my PC, no grafic
interface, i've only console to deal whith.
when i tape xstart i've received this message (look
for log file) .
XFree86 version is 4.0.3 /Xwindow system(protocole
version 11, revision 0. release 16 march 2001. OS linux 2.2.17-8smp
i686
my pc
hi
when insatlling linux 7.1 on my PC, no grafic
interface, i've only console to deal whith.
when i tape xstart i've received this message (look
for log file) .
XFree86 version is 4.0.3 /Xwindow system(protocole
version 11, revision 0. release 16 march 2001. OS linux 2.2.17-8smp
i686
my pc
On Thursday 04 November 2004 21:50, abdelmoula hicham wrote:
when insatlling linux 7.1 on my PC, no grafic interface, i've only console
to deal whith. when i tape xstart i've received this message (look for log
file) . XFree86 version is 4.0.3 /Xwindow system(protocole version 11,
revision 0.
Hello!
If someone nows a how-to to put my card ATI radeon 345M IGP with full
acceleration please tell me!
I tried DRI but nothing...
thanks!!
karlos
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
I'm installing Redhat 9 on an SGI 550 with the video card listed below.
The error that I keep getting is: no screens found
The version of XFree86 you are using: 4.3.0-2
The Operating System and its version number: Linux Redhat 9
The video hardware that you are using: Cirrus Logic GD543x
This
hi!,
i have installed Redhat Linux( 2.4.xx) on my i386 pc.i am not able to start
the gui.
when i give this command
#startx
i get the following output which i am writing a part of it.
..
Markers:...
(EE)Unable to locate/open config file
(EE)Error from xf86HandleConfigFile()
Fatal server
In my Xwindows ,a litte windowInput Not Supported always is moveing.
who can tell me how to remove it.
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
any body can help my geting SiS650X graphincs driver
for RedHat7.3
__
Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We finish.
http://promotions.yahoo.com/new_mail
___
XFree86 mailing
I recived this and I don`t know what to do. I install the winex and mandrae 10 crash.
it the 2 time. i have this problem before but I reinstall the opereited sistem , I
loose my data :(
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to [EMAIL
Help me
Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We finish.
XFree86.0.log
Description: XFree86.0.log
Hello,
I'm hoping someone can help me because I'm about to lose my mind. I
just bit the bulet and scrapped Windows completely, and installed a new
drive and installed Red Hat 9. I'm slowly forcing myself to use Linux,
hopefully for good. But I'm mgetting VERY discouraged with the video.
I'm
Hello I dont know how this bug thing work. I am
sendind you the file
XFree86.20.log
My system is crashing continuosly in KDE and GNOME. I
would like to know how to repair it, and where to
track the bug infromation. Thanks a lot
Carlos
The XFree86 log file is a good starting point, but where is it?
It was not attached to your email.
Mark.
On Wed, 25 Aug 2004, [iso-8859-1] Carlos Pineda wrote:
Hello I dont know how this bug thing work. I am
sendind you the file
XFree86.20.log
My system is
Thasnk a lot, the file is in
/var/log/XFree86.20.log
Carlos
--- Mark Vojkovich [EMAIL PROTECTED] escribió:
The XFree86 log file is a good starting point,
but where is it?
It was not attached to your email.
Mark.
On Wed, 25 Aug 2004, [iso-8859-1] Carlos
I think first off you want to be using the native Matrox driver
instead of the generic Vesa driver like you are doing currently.
In the /etc/X11/XF86Config-4 file, replace Driver vesa with
Driver mga.
If problems persist, try using the xtt font module instead
of freetype. That is, in the
Finally, I was able to successfully compile the X11
(the latest developer version from website). But has
the following problem when make install: As a regular
user with no root previllege on a RH Advanced server,
I compiled x11 with projectroot = app in my home
directory. However, when make
I've been searching around the internet for a few days now and just
can't seem to find the information I'm looking for, so I'm hoping
someone here on the list would be kind enough to help out.
I have a system using an i815 chipset and it is connected to a ADS TV
Elite XGA scan convertor that
The complete error message is in the attached log file. Can you help me, please? Thanks
Yahoo! Companion - Scarica gratis la toolbar di Ricerca di Yahoo!
XFree86.0.log
Description: XFree86.0.log
- Original Message -
From: Levi Campbell
To: xfree86
Sent: Monday, July 26, 2004 7:54 PM
Subject: [XFree86] Re: Cannot start XFree86, Help!!!
Folks, here's my log file, I cannot find my config file, what do I need to
do?
xfree.log
Description: Binary data
The complete message error is in the attached log file...Can u help me
please?Thanks...
XFree86.0.log
Description: Binary data
On Tue, Jul 27, 2004 at 06:58:03AM -0600, Levi Campbell wrote:
Folks, here's my log file, I cannot find my config file, what do I need to do?
Actually: that's exactly the problem: X can't find your config file, and doesn't
seem to be doing too well getting things running without one. Check your
On Tue, Jul 27, 2004 at 03:05:14PM +0200, Andrea Gaglione wrote:
The complete message error is in the attached log file...Can u help me
please?Thanks...
Please check the archives of this mailinglist for the fatal error
reported in your logfile. This problem has been discussed many, many,
many,
Subject: Re: [XFree86] Re: Cannot start
XFree86, Help!!!
On Tue, Jul 27, 2004 at 06:58:03AM -0600, Levi Campbell
wrote: Folks, here's my log file, I cannot find my config file, what
do I need to do?Actually: that's exactly the problem: X can't find
your config file, and doesn'tseem
See it running the following helps:
# X -configure
Some instructions are presented after it does that. If that works, put
the resulting file in /etc/X11/XF86Config
be sure to rename it from whatever X -configure makes (usually
XF86Config.new) to just XF86Config.
HTH.
-Andy
- Original Message -
From: Levi Campbell
To: xfree86
Sent: Tuesday, July 27, 2004 6:58 AM
Subject: [XFree86] Re: Cannot start XFree86, Help!!!
- Original Message -
From: Levi Campbell
To: xfree86
Sent: Monday, July 26, 2004 7:54 PM
Subject: [XFree86] Re: Cannot start
Continuing to post your log file to the list will not speed up any assistance.
Once is enough.
Thanks!
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
On Tuesday, July 27 2004 06:59 am, Andrea Gaglione wrote:
The complete error message is in the attached log file. Can you help
me, please? Thanks
http://xfree86.linuxwiki.org/FAQErrorMessages#head-66113454d1ddc398ffb1e7bce3fb588e7d5dff4d
-
Yahoo! Companion -
Folks, here's my log file, I cannot find my config file, what do I need to
do?
xfree.log
Description: Binary data
1 - 100 of 412 matches
Mail list logo
