On Sun, 15 Apr 2007, Mehdi Tahanizadeh wrote:
I installed fullpackage of xserver on the fedora5 by Xinstall.sh.
but after full installation and running command of 'XFree86 -configuration'
i reboot computer but didn't start xserver.
I tried very much to install xfree86 but i couldn't .
please
hi
Please check the XF86Config file and check for the x pointer .
For that u can do it by
XFree86 -configure
and saveing the XF86config file in /etc/X11
Arun
Mehdi Tahanizadeh wrote:
Hello
I installed fullpackage of xserver on the fedora5 by Xinstall.sh.
but after full installation and
Your XFree86 version (4.2.0) predates your video card and is
too old to support it. You have two options: update to XFree86
4.4.0 or newer which comes with an XFree86-supported driver that
works with that card, or use NVIDIA's binary Linux driver from NVIDIA's
web site. The later is supported
You should send your /var/log/XFree86.0.log file to the xfree86@xfree86.org
list so the problem can be diagnosed.
MArk.
On Thu, 2 Jun 2005, novi adipriyono
wrote:
it is my problem, my linux cannot run xwindow :
Fatal Error :
Login is anonymous, password is your email address. This is
an internet standard.
Mark.
On Mon, 28 Mar 2005, charles williams wrote:
I am trying to access your ftp server from the unix prompt because my x
server is corrupted and I don't want to replace it and I
I have the notebook IBM ThinkPad/R40 and install Linux RH 7.3 with the
kernel 2.4.20.
My the problem is that is not start Xserver, when its monitor is IBM
ThinkPad 1024x768 TFT LCD.
Know you help me? I attach the err.log file.
I think I see the problem in the following lines from your log
try doing a service xfs restart and then startx
--- Noman Siddiqui [EMAIL PROTECTED] wrote:
Hi,
am having problem in Xwinodws when am going to
startx it says:
Fatal Server Error
Could not open default font 'fixed'
whtat is that ? how can i fix this problem without
re-installing
I Dont know for sure but I assume you choose the same version as the
version of glibc installed on your machine
On Wed, 7 Jul 2004 16:11:29 +0800, [EMAIL PROTECTED] wrote:
HI! xfree86
I want to download xfree86 4.4 for my i686 PC, but there are four directory
C H ! C OoooOooo wrote:
i use redhat 3
xfree86 4.4.0
P4 titan motherboard with built in Intel 845GL chipset,
wen i was installing xfree many folders couldn't be created but it
worked, anyway wen i configure it i cant find the card in the list of
cards and i dont knw how to setup it, and
gt;From: quot;taaaj osaquot; lt;[EMAIL PROTECTED]gt;
gt;Reply-To: [EMAIL PROTECTED]
gt;To: [EMAIL PROTECTED]
gt;Subject: [XFree86] HELP ME
gt;Date: Mon, 19 Apr 2004 16:40:17 +0200
gt;
gt;Dear Sir
gt;My x windows is not starting due to some problem (can't start the x
gt;server). I am sending the
gt;From: quot;taaaj osaquot; lt;[EMAIL PROTECTED]gt;
gt;Reply-To: [EMAIL PROTECTED]
gt;To: [EMAIL PROTECTED]
gt;Subject: [XFree86] HELP ME
gt;Date: Mon, 19 Apr 2004 16:40:17 +0200
gt;
gt;Dear Sir
gt;My x windows is not starting due to some problem (can't start the x
gt;server). I am sending the
Helo,
Try add/change DefaultColorDepth to 16 or less (15, 8)
In the Screen section
_
De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Envoyé : lundi 19 avril 2004 16:40
À : [EMAIL PROTECTED]
Objet : [XFree86] HELP ME
Dear Sir
My x windows is not starting due to
On Wed, Apr 14, 2004 at 02:36:31AM -0700, psy cho wrote:
I made some changes in control center for my screen (i can't remember exaclty where
- video card/dysplay i think -i am a linux newbie ) and when i start a new session i
get an error message. thats why i send u two files :
On Friday 19 March 2004 21:17, [EMAIL PROTECTED] wrote:
I cannot start X.
You're trying to run 1024x768 at 24 bit colours with a video card/chipset that
according to the logfile has 2MB video ram. 2MB is not enough to run 1024x768
at 24 bit colours (needs at least 2.25MB).
Regards,
Pieter
Please first tell us what Linux you are running..
There is NO linux version 8.2
Perhaps it is Mandrake or Suse you are running?
Please reply
gary
On November 21, 2003 10:35 am, renu gopal wrote:
please give information to recover XWINDOW SYSTEM in my linux computer.
Already it has
Quoth Andrej:
I have COMPAQ Presario 915US Laptop and I have some difficulties with
installation X window system. I m new to this OS. Please help me with
your experience. My video card is ATI U1/A3 Accelerated Graphics ,
display is Mobility U1 and my Sound card is SoundMAX Integrated Digital
On Sat, 2003-09-06 at 02:07, francis raj wrote:
Dear sir,
Please help me to get graphical display on my system which is redhat linux 9
installed.
[...snip...]
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II)
We need to see the /var/log/XFree86.0.log file.
Mark.
On Mon, 8 Sep 2003, farzad wrote:
Hi
I install linux 9.0 but after that my Xwindows did not work at all .
My VGA card is TNT2 32 .
How can I do that?
Please help me .
Thanks
bye
I'm afraid I don't speak Spanish, at least, I think that's Spanish! :0)
Anyway...
From your logfile, X is complaining you don't have a mouse. Or at least, you
don't have a mouse on /dev/psaux.
If you actually, physically, don't have a mouse, try using the option
allowmouseopenfail in your
Tried that ... XFree86 probes anyway .
Thanks for your suggestion though...
Rolf
Sycholic wrote:
what about starting X without ramdac probing? it does have that ability
- Original Message -
From: Rolf Gerrits [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, August 10, 2003 6:10 PM
PROTECTED]
Enviado: Lunes 23 de Junio de 2003 16:13
Asunto: RE: [XFree86] Help me please!!
Looks like you made some progress, Your no devices found error went
away.
Looks like you need to work on screen settings next. According to the
log
file in this mail your Ramdac probe
try running /usr/X11R6/bin/XF86Config again, looks
like you dont have a legal screen mode defined (atleast thats what I allways get
when I dont have any valid scan modes)
- Original Message -
From:
magrostigma
To: [EMAIL PROTECTED]
Sent: Friday, August 01, 2003 5:43
You need to post your /var/log/XFree86.0.log file. The error
below in itself is not useful.
Mark.
On Fri, 1 Aug 2003, magrostigma wrote:
When I write in the console startx I have this problem:
Fatal server error:
no screen found
XIO: fatal IO error 104
:
no screens found
-Original Message-
From: Emilio Bustos [mailto:[EMAIL PROTECTED]
Sent: Sunday, June 22, 2003 8:12 PM
To: [EMAIL PROTECTED]
Subject: Re: [XFree86] Help me please!!
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org
de Junio de 2003 16:17
Asunto: RE: [XFree86] Help me please!!
(!!) More than one primary device found
(--) PCI: (0:10:0) S3 Inc. 86c968 [Vision 968 VRAM] rev 0 rev 0, Mem @
0x1000/26
(II) S3: driver (version 0.3.5 for S3 chipset: 964-0, 964-1, 968,
Trio32/64,
Aurora64V+
(II
On 06/19/03 19:27 Emilio Bustos spoke thusly
I need a solution
My Video card is a Diamond Stealth 64 Video 3200 with 2Mb
Is that an S3 chipset?
The configuration is ok but the Xfree86 no start.
Here's the log file from /var/log/xfree86.log
Please reply and let me know if you can provide some
Yes, I have the section in the XFree86.config
You have de solution for me?
regards
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
(!!) More than one primary device found
(--) PCI: (0:10:0) S3 Inc. 86c968 [Vision 968 VRAM] rev 0 rev 0, Mem @
0x1000/26
(II) S3: driver (version 0.3.5 for S3 chipset: 964-0, 964-1, 968, Trio32/64,
Aurora64V+
(II) Primary Device is:
(WW) s3: No matching Device section for instance (BusID
You should do a web search.
Fatal server error:
could not open default font 'fixed'
Is answered nearly every day on this list.
Mark.
On Fri, 20 Jun 2003, xscui wrote:
Hi,xfree86£¬
I am a Chinese student,and I am a beginner of Linux.I used to use RedHat
We need to see your /var/log/XFree86.0.log file.
Mark.
On Tue, 17 Jun 2003, [iso-8859-1] fedesciro wrote:
Good morning i have a problem with xfree86 grafical interface. i have red hat linux
8.0
the problem is that only the text mode start with the text console.
Yes, send us your /var/log/XFree86.0.log file and perhaps
/etc/X11/XF86Config-4 as well.
Jesse
On Tue, 17 Jun 2003, [iso-8859-1] fedesciro wrote:
Good morning i have a problem with xfree86 grafical interface. i have red hat linux
8.0
the problem is that only the text mode start with the
On Son, 2003-03-16 at 07:35, Omanno wrote:
i have an powered by ATI Radeon 9100
does xfree86 have any support for it??
Yes, should work with 4.3.0.
--
Earthling Michel Dänzer (MrCooper)/ Debian GNU/Linux (powerpc) developer
XFree86 and DRI project member / CS student, Free Software
try looking here http://mirror.ati.com/support/driver.html (the new 4.3
version which announces support is causing me probs, so dunno 'bout
that...but won't hurt to go directly to Radeon for this, yes?
On Sun, 16 Mar 2003, Omanno wrote:
i have an powered by ATI Radeon 9100
does xfree86
You're going to have to clarify your request a little bit. It looks like
you just want information on XFree86. Perhaps start at
www.xfree86.org/support.html?
Jesse
On Fri, 28 Feb 2003, Giraldo Alonso Suarez wrote:
Hello
I need to make a investigation about grafics servers of Linux. I need
On Thu, 27 Feb 2003, Jacek [iso-8859-2] Pop³awski wrote:
On Thu, Feb 27, 2003 at 09:17:58AM +0800, tiongnam wrote:
My card is ATI card. but my XFree86 didn't work !Hope you can help me.
In your log I found you are using 4.1.0, it's quite old release and doesn't
support new ATI cards.
The people at [EMAIL PROTECTED] need just a _little_ more information
about your setup.
For instance, what ATI card are you using? If it's a Radeon, which one?
9000? 7500? 8500? VE? Please be sure to give the exact model number.
Then, which XFree86 server version are you using? This can be
On Thu, Feb 27, 2003 at 09:17:58AM +0800, tiongnam wrote:
My card is ATI card. but my XFree86 didn't work !Hope you can help me.
In your log I found you are using 4.1.0, it's quite old release and doesn't
support new ATI cards. Solution: update XFree86.
--
Free Software - find interesting
the last bit about could not open default font 'fixed' was explained in
depth here.
Sent: Tuesday, February 04, 2003 5:30 AM
Subject: Re: [XFree86] Error Starting X
You can use Google to search the site, just go to the Advanced Search
Options and set the Domain Option (in the first block of
Title: RE: [XFree86] help me
thats a problem with the XFree86 module loader
in combination with a more recent gnuc compiler.
you might want to use newer sources
or add to your host.def the additional compiler
switch of --no-merge-constants in order to
disable the introduction of those
Thankyou very much~~
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
On Thu, 16 Jan 2003, Taiyoo Kim wrote:
Hi, I have a some problem
Error massage below ...(II) LoadModule: bitmap
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
Not loading .rodata.str1.32
Not loading .rodata.str1.1
Not loading .rodata.cst8
Not loading .rodata.str1.1
Not loading
41 matches
Mail list logo
