[xmail] Re: Binding XMail to a specific NIC/IP address
With Linux iptables you should be able to just work with the fact that the connection is going to port 25 and not care what port it is coming from. Bill -- From: Rob Arends[SMTP:[EMAIL PROTECTED] Sent: Monday, June 09, 2003 10:03 PM To:[EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address Davide, When sending SMTP, does XMail always use a source port of 25, or dynamic port? If it was always source port of 25, then I could use a firewall to source translate IP packets from a specific IP and port. Alternately being able to specify in XMail the sending IP[:port] would solve the problem. Rob :-) __ On Friday, 6 June 2003 10:18 AM, Davide Libenzi wrote: -SI ip[:port] This is only for the listening sockets. - Davide - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED] - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED]
[xmail] Re: Binding XMail to a specific NIC/IP address
I must chuckle - everything is solved with Linux - in this case IPTABLES does it. This is not a solution for the w32 environment. Some options have been thrown around in this thread, and I'm sure will work. However the solutions often complicate the email system beyond a point where future problem solving becomes rather dificult. Most w32 based mail servers I've used (and there are many) will bind SMTP to the IP address specified for BOTH in and out going SMTP connections. This may not be the default in the linux world, hence Davide has built XMail to listen only on the specified IP address. Any good firewall (or IPtables) should be able to translate the addresses, but the original problem as I recall was that the server had 2 nics and one nic was very busy doing non mail tasks. The other was dedicated to mail, however outbound smtp mail was not going out this nic. An alternate solution is to change which is the default nic.!! Rob :-) __ Censorship can't eliminate evil; it can only kill freedom. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Bill Healy Sent: Tuesday, 10 June 2003 4:30 PM To: '[EMAIL PROTECTED]' Subject: [xmail] Re: Binding XMail to a specific NIC/IP address With Linux iptables you should be able to just work with the fact that the connection is going to port 25 and not care what port it is coming from. Bill -- From:Rob Arends[SMTP:[EMAIL PROTECTED] Sent:Monday, June 09, 2003 10:03 PM To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address Davide, When sending SMTP, does XMail always use a source port of 25, or dynamic port? If it was always source port of 25, then I could use a firewall to source translate IP packets from a specific IP and port. Alternately being able to specify in XMail the sending IP[:port] would solve the problem. Rob :-) __ On Friday, 6 June 2003 10:18 AM, Davide Libenzi wrote: -SI ip[:port] This is only for the listening sockets. - Davide - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED] - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED] - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED]
[xmail] Re: Binding XMail to a specific NIC/IP address
On Tue, 10 Jun 2003, Rob Arends wrote: Davide, When sending SMTP, does XMail always use a source port of 25, or dynamic port? No, you do not bind a specific IP:PORT when you do a connect. You leave the TCP/IP+routing layer to pick up one for you. - Davide - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED]
[xmail] Re: Binding XMail to a specific NIC/IP address
Davide, When sending SMTP, does XMail always use a source port of 25, or dynamic port? If it was always source port of 25, then I could use a firewall to source translate IP packets from a specific IP and port. Alternately being able to specify in XMail the sending IP[:port] would solve the problem. Rob :-) __ On Friday, 6 June 2003 10:18 AM, Davide Libenzi wrote: -SI ip[:port] This is only for the listening sockets. - Davide - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED]
[xmail] Re: Binding XMail to a specific NIC/IP address
http://www.xmailserver.org/Readme.html#command%20line -Pi ip address no we are talking about outgoing transfer smtp. btw, there is only -PI for the pop3 server, not -Pi - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED]
[xmail] Re: Binding XMail to a specific NIC/IP address
Alex Young wrote: Pi only works for incoming email. We currently have a firewall and it will translate the internal IP address to an external one. That's why I am trying to bind Xmail to the one NIC with the different IP address. Are both NICs connected to the same network? In that case, unless you have a 10Mb connection to the internet, www traffic can't be so heavy to slow smtp traffic. The performance problem with smtp may be in the usage of the internet connection, so you may want to limit bandwith assigned to www using your http proxy. Leonardo - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED]
[xmail] Re: Binding XMail to a specific NIC/IP address
Is this windows or *nix? David -Original Message- From: Alex Young [mailto:[EMAIL PROTECTED] Sent: 05 June 2003 12:50 To: [EMAIL PROTECTED] Subject: [xmail] Binding XMail to a specific NIC/IP address =20 =20 =20 Hi, does anyone know if it is possible to bind xmail to send out email through a specific NIC or IP address? =20 I know you can bind XMails incoming connections to specific=20 IP addresses through the MAIL_CMD_LINE in the registry, any thing to do=20 the same for outbound connections? =20 Thanks, Alex =20 - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED] =20 =20 __ __ This e-mail has been scanned for all viruses by Star Internet. The service is powered by MessageLabs. For more information on a proactive anti-virus service working around the clock, around the globe, visit: http://www.star.net.uk __ __ =20 - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED]
[xmail] Re: Binding XMail to a specific NIC/IP address
The connections inbound to WWW isn't the major amount of traffic, it's the internal users which use the connection which max it out when sending newsletters. This is why I want to separate the two services onto separate NIC's. Allow internal users to use WWW on one NIC with no slowdown and have SMTP using the second NIC so it doesn't have any network slowdown or interfere with the users on the first NIC. This is on a Windows 2000 server. Thanks, Alex -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Leonardo Cabral Sent: 05 June 2003 14:22 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address Alex Young wrote: Pi only works for incoming email. We currently have a firewall and it will translate the internal IP address to an external one. That's why I am trying to bind Xmail to the one NIC with the different IP address. Are both NICs connected to the same network? In that case, unless you have a 10Mb connection to the internet, www traffic can't be so heavy to slow smtp traffic. The performance problem with smtp may be in the usage of the internet connection, so you may want to limit bandwith assigned to www using your http proxy. Leonardo - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED] - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED]
[xmail] Re: Binding XMail to a specific NIC/IP address
This is on a Windows 2000 server. use linux / iptables :-) - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED]
[xmail] Re: Binding XMail to a specific NIC/IP address
Arghh... Company policy to use M$ products. I personally would like a mix of M$ and Linux servers but I cant unfortunately. Alex -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of S=F6nke Ruempler Sent: 05 June 2003 14:56 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address This is on a Windows 2000 server. use linux / iptables :-) - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED] - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED]
[xmail] Re: Binding XMail to a specific NIC/IP address
You can set the NIC priority in: Start Settings network and dial-up connections page advanced advanced settings Unless there is a need for outbound www/intranet traffic to go from a = specific IP you could set the XMail NIC to top priority David -Original Message- From: Alex Young [mailto:[EMAIL PROTECTED] Sent: 05 June 2003 15:02 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address =20 =20 =20 Arghh... Company policy to use M$ products. I personally would like a mix of M$ and Linux servers but I cant unfortunately. =20 Alex =20 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of S=3DF6nke Ruempler Sent: 05 June 2003 14:56 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address =20 =20 =20 This is on a Windows 2000 server. =20 use linux / iptables :-) - To unsubscribe from this list: send the line unsubscribe=20 xmail in the body of a message to [EMAIL PROTECTED] For general=20 help: send the line help in the body of a message to [EMAIL PROTECTED] =20 =20 =20 - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED] =20 =20 __ __ This e-mail has been scanned for all viruses by Star Internet. The service is powered by MessageLabs. For more information on a proactive anti-virus service working around the clock, around the globe, visit: http://www.star.net.uk __ __ =20 - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED]
[xmail] Re: Binding XMail to a specific NIC/IP address
On Thu, 5 Jun 2003, Alex Young wrote: Our server has 2 network cards. The first one just has inbound WWW connections. The second one has all the inbound POP3/SMTP connections. I want to specify that outbound connections only go through the second network card for the email as the primary card is under much more use from internal clients and WWW connections. If I send a newsletter out it sends it through the primary NIC and slows down access. I was looking for a way to exclusively use the 2nd NIC for email to avoid this problem as the NIC doesn't get much use. Easy task with iptables. Time to switch to a real OS ? - Davide - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED]
[xmail] Re: Binding XMail to a specific NIC/IP address
That IP *will* get blocked by spamcop when your users decide not to = unsubscribe, but tick the report spam option - I hate spamcop as it's = such a flawed system; we once had our entire corporate email blocked = because someone reported a personal email on it. Have you looked for an ip forwarder that can bind to different NICs or = do you even have the luxury of using a second machine? David -Original Message- From: Alex Young [mailto:[EMAIL PROTECTED] Sent: 05 June 2003 15:46 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address =20 =20 =20 Thanks, I looked at this before. It would work in the current setup but in the future we will be setting up a new mail server with=20 dual NICS and two SMTP servers on it. One for normal customer email and another for the newsletters. I was hoping to keep them totally separate=20 just in case the IP for the newsletter gets blocked by spamcop, which does happen even when you have double opt-in systems in place. Its only an inconvenience for a small amount of people when it does happen but its still best avoided. =20 Alex =20 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Stebbings Sent: 05 June 2003 15:26 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address =20 =20 =20 You can set the NIC priority in: =20 Start Settings network and dial-up connections page advanced advanced settings =20 Unless there is a need for outbound www/intranet traffic to=20 go from a =3D specific IP you could set the XMail NIC to top priority =20 David =20 -Original Message- From: Alex Young [mailto:[EMAIL PROTECTED] Sent: 05 June 2003 15:02 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address = =3D20 =3D20 =3D20 Arghh... Company policy to use M$ products. I personally=20 would like a mix of M$ and Linux servers but I cant unfortunately. =3D20 Alex =3D20 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of S=3D3DF6nke Ruempler Sent: 05 June 2003 14:56 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address =3D20 =3D20 =3D20 This is on a Windows 2000 server. =3D20 use linux / iptables :-) - To unsubscribe from this list: send the line=20 unsubscribe=3D20 xmail=20 in the body of a message to [EMAIL PROTECTED] For general=3D20 help: send the line help in the body of a message to [EMAIL PROTECTED] =3D20 =3D20 =3D20 - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED] =3D20 =3D20 __ __ This e-mail has been scanned for all viruses by Star Internet. The service is powered by MessageLabs. For more information on=20 a proactive anti-virus service working around the clock, around the=20 globe, visit: http://www.star.net.uk __ __ =3D20 - To unsubscribe from this list: send the line unsubscribe=20 xmail in the body of a message to [EMAIL PROTECTED] For general=20 help: send the line help in the body of a message to [EMAIL PROTECTED] =20 =20 - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED] =20 =20 __ __ This e-mail has been scanned for all viruses by Star Internet. The service is powered by MessageLabs. For more information on a proactive anti-virus service working around the clock, around the globe, visit: http://www.star.net.uk __ __ =20 - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED]
[xmail] Re: Binding XMail to a specific NIC/IP address
SpamCop is rubbish in my opinion, unfortunately many people think its great. The Windows server has 2 NICS with 2 different IP addresses. The firewall uses NAT to give these 2 NIC's different static IP's for the internet on outbound connections. If I could get windows to bind one SMTP service running on port 25 to one NIC/IP and bind the other SMTP service running on port 2525 to the other NIC/IP all my problems would be solved. I suppose being able to specify what outbound port Xmail could use and then using the Firewall NAT to translate all connections would also work, but I am not certain that it would. I would love to use a second machine. I swear as techies become management their intelligence decreases with each promotion. Its almost impossible to make them understand the need for new hardware and/or software. They want to know what's wrong with the PII 233mhz with 128mb of ram running NT4 and why we cant install Xmail and other stuff on that! Alex -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Stebbings Sent: 05 June 2003 16:02 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address That IP *will* get blocked by spamcop when your users decide not to = unsubscribe, but tick the report spam option - I hate spamcop as it's = such a flawed system; we once had our entire corporate email blocked = because someone reported a personal email on it. Have you looked for an ip forwarder that can bind to different NICs or = do you even have the luxury of using a second machine? David -Original Message- From: Alex Young [mailto:[EMAIL PROTECTED] Sent: 05 June 2003 15:46 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address =20 =20 =20 Thanks, I looked at this before. It would work in the current setup but in the future we will be setting up a new mail server with=20 dual NICS and two SMTP servers on it. One for normal customer email and another for the newsletters. I was hoping to keep them totally separate=20 just in case the IP for the newsletter gets blocked by spamcop, which does happen even when you have double opt-in systems in place. Its only an inconvenience for a small amount of people when it does happen but its still best avoided. =20 Alex =20 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Stebbings Sent: 05 June 2003 15:26 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address =20 =20 =20 You can set the NIC priority in: =20 Start Settings network and dial-up connections page advanced advanced settings =20 Unless there is a need for outbound www/intranet traffic to=20 go from a =3D specific IP you could set the XMail NIC to top priority =20 David =20 -Original Message- From: Alex Young [mailto:[EMAIL PROTECTED] Sent: 05 June 2003 15:02 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address = =3D20 =3D20 =3D20 Arghh... Company policy to use M$ products. I personally=20 would like a mix of M$ and Linux servers but I cant unfortunately. =3D20 Alex =3D20 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of S=3D3DF6nke Ruempler Sent: 05 June 2003 14:56 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address =3D20 =3D20 =3D20 This is on a Windows 2000 server. =3D20 use linux / iptables :-) - To unsubscribe from this list: send the line=20 unsubscribe=3D20 xmail=20 in the body of a message to [EMAIL PROTECTED] For general=3D20 help: send the line help in the body of a message to [EMAIL PROTECTED] =3D20 =3D20 =3D20 - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED] =3D20 =3D20 __ __ This e-mail has been scanned for all viruses by Star Internet. The service is powered by MessageLabs. For more information on=20 a proactive anti-virus service working around the clock, around the=20 globe, visit: http://www.star.net.uk __ __ =3D20 - To unsubscribe from this list: send the line unsubscribe=20 xmail in the body of a message to [EMAIL PROTECTED] For general=20 help: send the line help in the body of a message to [EMAIL PROTECTED] =20 =20 - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED] =20 =20 __ __ This e-mail has been scanned for all viruses
[xmail] Re: Binding XMail to a specific NIC/IP address
Are you sure the bandwidth is maxed out? Normally sending large volumes = of email won't saturate bandwidth (even a 10Mbit network) before = saturating disk IO. It doesn't answer the question, but the issue might lie elsewhere... David -Original Message- From: Alex Young [mailto:[EMAIL PROTECTED] Sent: 05 June 2003 14:50 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address =20 =20 =20 The connections inbound to WWW isn't the major amount of traffic, it's the internal users which use the connection which max it out when sending newsletters. This is why I want to separate the two services onto separate NIC's. Allow internal users to use WWW on one=20 NIC with no slowdown and have SMTP using the second NIC so it doesn't have any network slowdown or interfere with the users on the first NIC. =20 This is on a Windows 2000 server. =20 Thanks, Alex =20 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Leonardo Cabral Sent: 05 June 2003 14:22 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address Alex Young wrote: Pi only works for incoming email. We currently have a firewall and it=20 will translate the internal IP address to an external one. That's why=20 I am trying to bind Xmail to the one NIC with the different IP=20 address. Are both NICs connected to the same network? In that case, unless you have a 10Mb connection to the internet, www traffic can't be so heavy to slow smtp traffic. The performance problem with smtp may be in the usage of the internet connection, so you may want to limit bandwith assigned to www using your http proxy. Leonardo - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED] - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED] This e-mail has been scanned for all viruses by Star Internet. The service is powered by MessageLabs. For more information on a proactive anti-virus service working around the clock, around the globe, visit: http://www.star.net.uk - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED]
[xmail] Re: Binding XMail to a specific NIC/IP address
On Thu, 5 Jun 2003, David Stebbings wrote: Are you sure the bandwidth is maxed out? Normally sending large volumes = of email won't saturate bandwidth (even a 10Mbit network) before = saturating disk IO. Well, this is for sure. At least if you do not have a 100Mbps link to the internet. - Davide - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED]
[xmail] Re: Binding XMail to a specific NIC/IP address
Sorry, I guess thats what happens when you are running on 3 hours of sleep :) -Mensaje original- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] nombre de Alex Young Enviado el: Thursday, June 05, 2003 8:58 AM Para: [EMAIL PROTECTED] Asunto: [xmail] Re: Binding XMail to a specific NIC/IP address Pi only works for incoming email. We currently have a firewall and it will translate the internal IP address to an external one. That's why I am trying to bind Xmail to the one NIC with the different IP address. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Andrew Joakimsen Sent: 05 June 2003 13:49 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address http://www.xmailserver.org/Readme.html#command%20line -Pi ip address -Mensaje original- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] nombre de Alex Young Enviado el: Thursday, June 05, 2003 7:50 AM Para: [EMAIL PROTECTED] Asunto: [xmail] Binding XMail to a specific NIC/IP address Hi, does anyone know if it is possible to bind xmail to send out email through a specific NIC or IP address? I know you can bind XMails incoming connections to specific IP addresses through the MAIL_CMD_LINE in the registry, any thing to do the same for outbound connections? Thanks, Alex - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED] - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED] - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED] - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED]
[xmail] Re: Binding XMail to a specific NIC/IP address
It would make a great XMail box -- just put linux on it... -Mensaje original- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] nombre de Alex Young Enviado el: Thursday, June 05, 2003 11:29 AM Para: [EMAIL PROTECTED] Asunto: [xmail] Re: Binding XMail to a specific NIC/IP address SpamCop is rubbish in my opinion, unfortunately many people think its great. The Windows server has 2 NICS with 2 different IP addresses. The firewall uses NAT to give these 2 NIC's different static IP's for the internet on outbound connections. If I could get windows to bind one SMTP service running on port 25 to one NIC/IP and bind the other SMTP service running on port 2525 to the other NIC/IP all my problems would be solved. I suppose being able to specify what outbound port Xmail could use and then using the Firewall NAT to translate all connections would also work, but I am not certain that it would. I would love to use a second machine. I swear as techies become management their intelligence decreases with each promotion. Its almost impossible to make them understand the need for new hardware and/or software. They want to know what's wrong with the PII 233mhz with 128mb of ram running NT4 and why we cant install Xmail and other stuff on that! Alex -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Stebbings Sent: 05 June 2003 16:02 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address That IP *will* get blocked by spamcop when your users decide not to = unsubscribe, but tick the report spam option - I hate spamcop as it's = such a flawed system; we once had our entire corporate email blocked = because someone reported a personal email on it. Have you looked for an ip forwarder that can bind to different NICs or = do you even have the luxury of using a second machine? David -Original Message- From: Alex Young [mailto:[EMAIL PROTECTED] Sent: 05 June 2003 15:46 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address =20 =20 =20 Thanks, I looked at this before. It would work in the current setup but in the future we will be setting up a new mail server with=20 dual NICS and two SMTP servers on it. One for normal customer email and another for the newsletters. I was hoping to keep them totally separate=20 just in case the IP for the newsletter gets blocked by spamcop, which does happen even when you have double opt-in systems in place. Its only an inconvenience for a small amount of people when it does happen but its still best avoided. =20 Alex =20 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Stebbings Sent: 05 June 2003 15:26 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address =20 =20 =20 You can set the NIC priority in: =20 Start Settings network and dial-up connections page advanced advanced settings =20 Unless there is a need for outbound www/intranet traffic to=20 go from a =3D specific IP you could set the XMail NIC to top priority =20 David =20 -Original Message- From: Alex Young [mailto:[EMAIL PROTECTED] Sent: 05 June 2003 15:02 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address = =3D20 =3D20 =3D20 Arghh... Company policy to use M$ products. I personally=20 would like a mix of M$ and Linux servers but I cant unfortunately. =3D20 Alex =3D20 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of S=3D3DF6nke Ruempler Sent: 05 June 2003 14:56 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address =3D20 =3D20 =3D20 This is on a Windows 2000 server. =3D20 use linux / iptables :-) - To unsubscribe from this list: send the line=20 unsubscribe=3D20 xmail=20 in the body of a message to [EMAIL PROTECTED] For general=3D20 help: send the line help in the body of a message to [EMAIL PROTECTED] =3D20 =3D20 =3D20 - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED] =3D20 =3D20 __ __ This e-mail has been scanned for all viruses by Star Internet. The service is powered by MessageLabs. For more information on=20 a proactive anti-virus service working around the clock, around the=20 globe, visit: http://www.star.net.uk __ __ =3D20 - To unsubscribe from this list: send the line unsubscribe=20 xmail in the body of a message to [EMAIL PROTECTED] For general=20 help: send the line help in the body of a message to [EMAIL PROTECTED] =20 =20 - To unsubscribe from this list: send
[xmail] Re: Binding XMail to a specific NIC/IP address
I fully agree with you Davide. Unfortunatly management sees something that is hard to administer. For instance I can talk one of the others non-network people through fixing something on windows. To do the same thing takes 5 times as long on Linux because they are unfamiliar with it. I was brought up with MS-DOS before Windows 3 so I have never had any problems with command line tolls etc. I don't think a single programmer at work could do anything in linux with out some kind of GUI. With me being the only support person I can get calls any time night or day even if I am on holiday so I need something that I can talk a complete Muppet (management) through as quickly and as easily as possible. Hopefully later this year I will be able to get a linux box for internal DNS and IDS as we seem to be coming under a lot of attacks recently. At home I am running Red Hat 9, WinXP and Windows 2003. They all have their uses and I use them all. Just wish management could see that Linux can be useful too. Alex -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Davide Libenzi Sent: 05 June 2003 17:39 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address On Thu, 5 Jun 2003, Alex Young wrote: You would have thought Microsoft could get its $hit together and do something useful with each new release of its OS. They even have open source code they could steal to help them. If I could get Xmail to send out on a specific port I could get the firewall to translate it back to port 25 and a different IP address. Any way I can do this in windows? I know that many of you are just forced to work with it. But it seems so illogical to me. Linux has so many *free and yet powerful/working* tools to do things related to networking/server things. - Davide - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED] - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED]
[xmail] Re: Binding XMail to a specific NIC/IP address
You could run IIS SMTP on a different port and bind that do a different = network card and set a smart host to forward to xmail on 127.0.0.1 = port 25 David -Original Message- From: Alex Young [mailto:[EMAIL PROTECTED] Sent: 05 June 2003 16:29 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address =20 =20 =20 SpamCop is rubbish in my opinion, unfortunately many people think its great.=20 =20 The Windows server has 2 NICS with 2 different IP addresses. The firewall uses NAT to give these 2 NIC's different static IP's for the internet on outbound connections. If I could get windows to bind one SMTP service running on port 25 to one NIC/IP and bind the other SMTP service running on port 2525 to the other NIC/IP all my problems would be solved. =20 I suppose being able to specify what outbound port Xmail could use and then using the Firewall NAT to translate all connections would also work, but I am not certain that it would. =20 I would love to use a second machine. I swear as techies become management their intelligence decreases with each promotion.=20 Its almost impossible to make them understand the need for new hardware and/or software. They want to know what's wrong with the PII 233mhz=20 with 128mb of ram running NT4 and why we cant install Xmail and other stuff on that! =20 Alex =20 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Stebbings Sent: 05 June 2003 16:02 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address =20 =20 =20 That IP *will* get blocked by spamcop when your users decide not to = =3D unsubscribe, but tick the report spam option - I hate=20 spamcop as it's =3D such a flawed system; we once had our entire corporate=20 email blocked =3D because someone reported a personal email on it. =20 Have you looked for an ip forwarder that can bind to=20 different NICs or =3D do you even have the luxury of using a second machine? =20 David =20 -Original Message- From: Alex Young [mailto:[EMAIL PROTECTED] Sent: 05 June 2003 15:46 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address = =3D20 =3D20 =3D20 Thanks, I looked at this before. It would work in the current setup but in the future we will be setting up a new mail server with=3D20 dual NICS and two SMTP servers on it. One for normal customer email and=20 another for the newsletters. I was hoping to keep them totally separate=3D20 just in case the IP for the newsletter gets blocked by spamcop, which does happen even when you have double opt-in systems in place. Its only an inconvenience for a small amount of people when it does=20 happen but its still best avoided. =3D20 Alex =3D20 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Stebbings Sent: 05 June 2003 15:26 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address =3D20 =3D20 =3D20 You can set the NIC priority in: =3D20 Start Settings network and dial-up connections page advanced advanced settings =3D20 Unless there is a need for outbound www/intranet traffic to=3D20 go from a =3D3D specific IP you could set the XMail NIC to top priority =3D20 David =3D20 -Original Message- From: Alex Young [mailto:[EMAIL PROTECTED] Sent: 05 June 2003 15:02 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address = =3D =3D3D20 =3D3D20 =3D3D20 Arghh... Company policy to use M$ products. I personally=3D20 would like a mix of M$ and Linux servers but I cant unfortunately. =3D3D20 Alex =3D3D20 -Original Message- From: [EMAIL PROTECTED] =20 [mailto:[EMAIL PROTECTED] On Behalf Of S=3D3D3DF6nke Ruempler Sent: 05 June 2003 14:56 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address=20 =3D3D20 =3D3D20 =3D3D20 This is on a Windows 2000 server. =3D3D20 use linux / iptables :-) - To unsubscribe from this list: send the line=3D20 unsubscribe=3D3D20 xmail=3D20 in the body of a message to [EMAIL PROTECTED] For=20 general=3D3D20 help: send the line help in the body of a message to [EMAIL PROTECTED] =3D3D20 =3D3D20 =3D3D20 - To unsubscribe from this list: send the line unsubscribe=20 xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED] =3D3D20 =3D3D20 __ __ This e-mail has been scanned for all viruses by Star Internet. The service is powered by MessageLabs. For more information on=3D20 a proactive anti-virus service working around the clock, around the=3D20 globe, visit: http
[xmail] Re: Binding XMail to a specific NIC/IP address
Thanks, I think I am going to be forced to do that as it cant be done with Xmail. Shame because I don't like MS SMTP, but it's a workable solution. Alex -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Stebbings Sent: 06 June 2003 10:21 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address You could run IIS SMTP on a different port and bind that do a different = network card and set a smart host to forward to xmail on 127.0.0.1 = port 25 David -Original Message- From: Alex Young [mailto:[EMAIL PROTECTED] Sent: 05 June 2003 16:29 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address =20 =20 =20 SpamCop is rubbish in my opinion, unfortunately many people think its great.=20 =20 The Windows server has 2 NICS with 2 different IP addresses. The firewall uses NAT to give these 2 NIC's different static IP's for the internet on outbound connections. If I could get windows to bind one SMTP service running on port 25 to one NIC/IP and bind the other SMTP service running on port 2525 to the other NIC/IP all my problems would be solved. =20 I suppose being able to specify what outbound port Xmail could use and then using the Firewall NAT to translate all connections would also work, but I am not certain that it would. =20 I would love to use a second machine. I swear as techies become management their intelligence decreases with each promotion.=20 Its almost impossible to make them understand the need for new hardware and/or software. They want to know what's wrong with the PII 233mhz=20 with 128mb of ram running NT4 and why we cant install Xmail and other stuff on that! =20 Alex =20 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Stebbings Sent: 05 June 2003 16:02 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address =20 =20 =20 That IP *will* get blocked by spamcop when your users decide not to = =3D unsubscribe, but tick the report spam option - I hate=20 spamcop as it's =3D such a flawed system; we once had our entire corporate=20 email blocked =3D because someone reported a personal email on it. =20 Have you looked for an ip forwarder that can bind to=20 different NICs or =3D do you even have the luxury of using a second machine? =20 David =20 -Original Message- From: Alex Young [mailto:[EMAIL PROTECTED] Sent: 05 June 2003 15:46 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address = =3D20 =3D20 =3D20 Thanks, I looked at this before. It would work in the current setup but in the future we will be setting up a new mail server with=3D20 dual NICS and two SMTP servers on it. One for normal customer email and=20 another for the newsletters. I was hoping to keep them totally separate=3D20 just in case the IP for the newsletter gets blocked by spamcop, which does happen even when you have double opt-in systems in place. Its only an inconvenience for a small amount of people when it does=20 happen but its still best avoided. =3D20 Alex =3D20 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Stebbings Sent: 05 June 2003 15:26 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address =3D20 =3D20 =3D20 You can set the NIC priority in: =3D20 Start Settings network and dial-up connections page advanced advanced settings =3D20 Unless there is a need for outbound www/intranet traffic to=3D20 go from a =3D3D specific IP you could set the XMail NIC to top priority =3D20 David =3D20 -Original Message- From: Alex Young [mailto:[EMAIL PROTECTED] Sent: 05 June 2003 15:02 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address = =3D =3D3D20 =3D3D20 =3D3D20 Arghh... Company policy to use M$ products. I personally=3D20 would like a mix of M$ and Linux servers but I cant unfortunately. =3D3D20 Alex =3D3D20 -Original Message- From: [EMAIL PROTECTED] =20 [mailto:[EMAIL PROTECTED] On Behalf Of S=3D3D3DF6nke Ruempler Sent: 05 June 2003 14:56 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address=20 =3D3D20 =3D3D20 =3D3D20 This is on a Windows 2000 server. =3D3D20 use linux / iptables :-) - To unsubscribe from this list: send the line=3D20 unsubscribe=3D3D20 xmail=3D20 in the body of a message to [EMAIL PROTECTED] For=20 general=3D3D20 help: send the line help in the body of a message to [EMAIL PROTECTED] =3D3D20 =3D3D20 =3D3D20 - To unsubscribe from this list: send the line unsubscribe=20 xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help
[xmail] Re: Binding XMail to a specific NIC/IP address
I find MS SMTP isn't too bad. Certainly the features are limited as a = server, but as a relay (which is what we use it for) it works although = we're using it to relay to a separate MTA (powerMTA). It needs an = IISreset every day though in a scheduled task otherwise it chews up = memory. I noticed it had trouble doing direct delivery to certain domains = (ironically MSN and Hotmail) last year however, so it's worth testing = first before your badmail queue builds up. David -Original Message- From: Alex Young [mailto:[EMAIL PROTECTED] Sent: 06 June 2003 11:03 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address =20 =20 =20 Thanks, I think I am going to be forced to do that as it cant be done with Xmail. Shame because I don't like MS SMTP, but it's a workable solution. =20 Alex =20 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Stebbings Sent: 06 June 2003 10:21 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address =20 =20 =20 You could run IIS SMTP on a different port and bind that do a=20 different =3D network card and set a smart host to forward to xmail on=20 127.0.0.1 =3D port 25 =20 David =20 -Original Message- From: Alex Young [mailto:[EMAIL PROTECTED] Sent: 05 June 2003 16:29 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address = =3D20 =3D20 =3D20 SpamCop is rubbish in my opinion, unfortunately many people=20 think its great.=3D20 =3D20 The Windows server has 2 NICS with 2 different IP addresses. The firewall uses NAT to give these 2 NIC's different static=20 IP's for the internet on outbound connections. If I could get windows to bind one SMTP service running on port 25 to one NIC/IP and bind the=20 other SMTP service running on port 2525 to the other NIC/IP all my=20 problems would be solved. =3D20 I suppose being able to specify what outbound port Xmail=20 could use and then using the Firewall NAT to translate all connections would also work, but I am not certain that it would. =3D20 I would love to use a second machine. I swear as techies become management their intelligence decreases with each promotion.=3D20 Its almost impossible to make them understand the need for new hardware and/or software. They want to know what's wrong with the PII 233mhz=3D20 with 128mb of ram running NT4 and why we cant install Xmail and other stuff on that! =3D20 Alex =3D20 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Stebbings Sent: 05 June 2003 16:02 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address =3D20 =3D20 =3D20 That IP *will* get blocked by spamcop when your users=20 decide not to =3D =3D3D unsubscribe, but tick the report spam option - I hate=3D20 =20 spamcop as =20 it's =3D3D such a flawed system; we once had our entire = corporate=3D20 email blocked =3D3D because someone reported a personal email on it. =3D20 Have you looked for an ip forwarder that can bind to=3D20 different NICs or =3D3D do you even have the luxury of using a second machine? =3D20 David =3D20 -Original Message- From: Alex Young [mailto:[EMAIL PROTECTED] Sent: 05 June 2003 15:46 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address = =3D =3D3D20 =3D3D20 =3D3D20 Thanks, I looked at this before. It would work in the current setup but in=20 the future we will be setting up a new mail server with=3D3D20 = dual=20 NICS and two SMTP servers on it. One for normal customer email=20 and=3D20 another for the newsletters. I was hoping to keep them totally separate=3D3D20 = just in case the IP for the newsletter gets blocked by spamcop,=20 which does happen even when you have double opt-in=20 systems in place. =20 Its only an inconvenience for a small amount of people when it=20 does=3D20 happen but its still best avoided. =3D3D20 Alex =3D3D20 -Original Message- From: [EMAIL PROTECTED] =20 [mailto:[EMAIL PROTECTED] On Behalf Of David Stebbings Sent: 05 June 2003 15:26 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address=20 =3D3D20 =3D3D20 =3D3D20 You can set the NIC priority in: =3D3D20 Start Settings network and dial-up connections page advanced advanced settings =3D3D20 Unless there is a need for outbound www/intranet traffic to=3D3D20 go from a =3D3D3D specific IP you could set the XMail NIC to top priority =3D3D20 David =3D3D20 -Original Message- From: Alex Young [mailto:[EMAIL PROTECTED] Sent: 05 June 2003 15:02 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP=20
[xmail] Re: Binding XMail to a specific NIC/IP address
Hello Alex, Friday, June 6, 2003 you wrote: AY I think I am going to be forced to do that as it cant be done with AY Xmail. Shame because I don't like MS SMTP, but it's a workable AY solution. MS SMTP is an excellent tool for certain jobs. It is very fast (if bandwidth exists) and very efficient for relay. It can also be used as a backup mx although it is not particularly easy to automate. And it doesn't cost anything. Terry Fritts - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED]
[xmail] Re: Binding XMail to a specific NIC/IP address
in TCP, it's always incoming (theres no difference from incoming mails and outgoing mails, theres only connections). For outgoing connections (to restrict server so that it can only connect to 1 site) use the relay feature -Mensaje original- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] nombre de Alex Young Enviado el: jueves, 05 de junio de 2003 13:50 Para: [EMAIL PROTECTED] Asunto: [xmail] Binding XMail to a specific NIC/IP address Hi, does anyone know if it is possible to bind xmail to send out email through a specific NIC or IP address? I know you can bind XMails incoming connections to specific IP addresses through the MAIL_CMD_LINE in the registry, any thing to do the same for outbound connections? Thanks, Alex - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED] - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED]
[xmail] Re: Binding XMail to a specific NIC/IP address
I know you can bind XMails incoming connections to specific IP addresses through the MAIL_CMD_LINE in the registry, any thing to do the same for outbound connections? that is not specific to the application but to the ip protocol. you'll have to setup your eth0 (the first device) to the ip you wish or use an ip-filter like iptables. only for incoming traffic you can choose the ip binding. - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED]
[xmail] Re: Binding XMail to a specific NIC/IP address
Our server has 2 network cards. The first one just has inbound WWW connections. The second one has all the inbound POP3/SMTP connections. I want to specify that outbound connections only go through the second network card for the email as the primary card is under much more use from internal clients and WWW connections. If I send a newsletter out it sends it through the primary NIC and slows down access. I was looking for a way to exclusively use the 2nd NIC for email to avoid this problem as the NIC doesn't get much use. Thanks, Alex -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lord Soth Sent: 05 June 2003 12:52 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address in TCP, it's always incoming (theres no difference from incoming mails and outgoing mails, theres only connections). For outgoing connections (to restrict server so that it can only connect to 1 site) use the relay feature -Mensaje original- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] nombre de Alex Young Enviado el: jueves, 05 de junio de 2003 13:50 Para: [EMAIL PROTECTED] Asunto: [xmail] Binding XMail to a specific NIC/IP address Hi, does anyone know if it is possible to bind xmail to send out email through a specific NIC or IP address? I know you can bind XMails incoming connections to specific IP addresses through the MAIL_CMD_LINE in the registry, any thing to do the same for outbound connections? Thanks, Alex - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED] - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED] - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED]
[xmail] Re: Binding XMail to a specific NIC/IP address
firewall, it's your solution *lol* -Mensaje original- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] nombre de Alex Young Enviado el: jueves, 05 de junio de 2003 14:01 Para: [EMAIL PROTECTED] Asunto: [xmail] Re: Binding XMail to a specific NIC/IP address Our server has 2 network cards. The first one just has inbound WWW connections. The second one has all the inbound POP3/SMTP connections. I want to specify that outbound connections only go through the second network card for the email as the primary card is under much more use from internal clients and WWW connections. If I send a newsletter out it sends it through the primary NIC and slows down access. I was looking for a way to exclusively use the 2nd NIC for email to avoid this problem as the NIC doesn't get much use. Thanks, Alex -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lord Soth Sent: 05 June 2003 12:52 To: [EMAIL PROTECTED] Subject: [xmail] Re: Binding XMail to a specific NIC/IP address in TCP, it's always incoming (theres no difference from incoming mails and outgoing mails, theres only connections). For outgoing connections (to restrict server so that it can only connect to 1 site) use the relay feature -Mensaje original- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] nombre de Alex Young Enviado el: jueves, 05 de junio de 2003 13:50 Para: [EMAIL PROTECTED] Asunto: [xmail] Binding XMail to a specific NIC/IP address Hi, does anyone know if it is possible to bind xmail to send out email through a specific NIC or IP address? I know you can bind XMails incoming connections to specific IP addresses through the MAIL_CMD_LINE in the registry, any thing to do the same for outbound connections? Thanks, Alex - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED] - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED] - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED] - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED]
[xmail] Re: Binding XMail to a specific NIC/IP address
http://www.xmailserver.org/Readme.html#command%20line -Pi ip address -Mensaje original- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] nombre de Alex Young Enviado el: Thursday, June 05, 2003 7:50 AM Para: [EMAIL PROTECTED] Asunto: [xmail] Binding XMail to a specific NIC/IP address Hi, does anyone know if it is possible to bind xmail to send out email through a specific NIC or IP address? I know you can bind XMails incoming connections to specific IP addresses through the MAIL_CMD_LINE in the registry, any thing to do the same for outbound connections? Thanks, Alex - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED] - To unsubscribe from this list: send the line unsubscribe xmail in the body of a message to [EMAIL PROTECTED] For general help: send the line help in the body of a message to [EMAIL PROTECTED]
