Re: [xmail] User password
Positive I mean to me it makes no sense. My environment is as follows 2 Virtual machines Windows XP machine - IP address 10.1.1.17 (fresh install, outlook & thunderbird mail clients, no AV, no firewall) Gentoo Machine - IP address 10.1.1.200 A port scan of the Gentoo machine reveals ports 110, 25, 53 open but no 6017 Both machines can ping each other. I have full root access for both machines I can telnet to port 110 and 25, haven't tried any commands for the POP3 as I don't know hot to ask the server via telnet to authenticate users etc. From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Phillip R. Shaw Sent: 09 March 2013 16:07 To: XMail Users Mailing List Subject: Re: [xmail] User password Really dumb question. Are you sure you are hitting the correct xmail server? From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Barry Kavanagh Sent: Saturday, March 09, 2013 10:06 AM To: 'XMail Users Mailing List' Subject: Re: [xmail] User password Done, but it still returning the same error L From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Chris Franklin Sent: 08 March 2013 16:00 To: XMail Users Mailing List Subject: Re: [xmail] User password Edit your mailusers.tab file and change password field to "54525253" that will make the password 1776 The password field is the third field. On Fri, Mar 8, 2013 at 10:48 AM, Barry Kavanagh wrote: Hi Fred, Thanks for your help, unfortunately port 6017 is closed I only have access using the shell prompt and don't know the Xmail admin password but I do have full root shell access. Regards Barry -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Fred Sent: 08 March 2013 15:39 To: 'XMail Users Mailing List' Subject: Re: [xmail] User password I use this to control my server: http://www.webifi.com/xmail/ It talks to XMail through TCP PORT 6017 which is where XMail listen for its control protocol. You could also telnet localhost 6017 Then type "root"[ TAB]"yourpassword"[enter] Then type "userpasswd"[TAB]"domain"[TAB]"username"[TAB]"password"[enter] -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Barry Kavanagh Sent: 8 mars 2013 09:00 To: xmail@xmailserver.org Subject: [xmail] User password I have an old Xmail server running on a Gentoo Vmware box with full root access.I want to send a mail as user15 but can't remember the password.I have very basic Linux :( I am trying to reset the password for user15 I have tried entering say "user15" "XYZ" and saving the file but it does not work. How do I successfully reset this Xmail user password when the server has no X server and no web admin. ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail
Re: [xmail] User password
Nothing in that directory I'm afraid If anyone is curious about this dilemma I can provide the vmware virtual machine for download? I may give up on the issue soon. From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Bart Mortelmans Sent: 08 March 2013 21:45 To: XMail Users Mailing List Subject: Re: [xmail] User password Is there maybe a file with your username in it stuck in MailRoot/pop3locks Sincerely, Bart On 8-mrt.-2013, at 21:02, Barry Kavanagh wrote: I have already rebooted the server a good few times, restarted Xmail processes and nothing. From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Chris Franklin Sent: 08 March 2013 17:08 To: XMail Users Mailing List Subject: Re: [xmail] User password It really should have worked. I just retested it on 3 of are servers. Oh well just kill xmail's paid and restart/launch it. If your not clear on how to do that. Then just restart the server. If walk you through the killing of pid and restarting XMail. But I think your a little out of your element as it is. So rebooting should be the easiest option for you. On Mar 8, 2013 12:01 PM, "Barry Kavanagh" wrote: Thank you for the reply, Even though I changed the password I still cannot authenticate. I can telnet to my server on port 110. Regards Barry From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Chris Franklin Sent: 08 March 2013 16:27 To: XMail Users Mailing List Subject: Re: [xmail] User password No need. It should just be active. XMail claim to index/cache data but we've never seen this to be true. On Mar 8, 2013 11:25 AM, "Barry Kavanagh" wrote: Ok password has been changed for my user, how can I stop Xmail to write the changes? -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Fred Sent: 08 March 2013 15:54 To: 'XMail Users Mailing List' Subject: Re: [xmail] User password Then you have to change the string inside the file ctrlaccounts.tab Use XMCrypt to generate a new password: (in bin/ folder) mail# ./XMCrypt test 11001611 Replace the generated string in file ctrlaccounts.tab "root"[TAB]"11001611"[ENTER] You now have root access to the XMail server. You can now reset any user passwords by following the procedure I sent you in the last reply. -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Barry Kavanagh Sent: 8 mars 2013 10:48 To: 'XMail Users Mailing List' Subject: Re: [xmail] User password Hi Fred, Thanks for your help, unfortunately port 6017 is closed I only have access using the shell prompt and don't know the Xmail admin password but I do have full root shell access. Regards Barry -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Fred Sent: 08 March 2013 15:39 To: 'XMail Users Mailing List' Subject: Re: [xmail] User password I use this to control my server: http://www.webifi.com/xmail/ It talks to XMail through TCP PORT 6017 which is where XMail listen for its control protocol. You could also telnet localhost 6017 Then type "root"[ TAB]"yourpassword"[enter] Then type "userpasswd"[TAB]"domain"[TAB]"username"[TAB]"password"[enter] -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Barry Kavanagh Sent: 8 mars 2013 09:00 To: xmail@xmailserver.org Subject: [xmail] User password I have an old Xmail server running on a Gentoo Vmware box with full root access.I want to send a mail as user15 but can't remember the password.I have very basic Linux :( I am trying to reset the password for user15 I have tried entering say "user15" "XYZ" and saving the file but it does not work. How do I successfully reset this Xmail user password when the server has no X server and no web admin. ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http:/
Re: [xmail] User password
Really dumb question. Are you sure you are hitting the correct xmail server? From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Barry Kavanagh Sent: Saturday, March 09, 2013 10:06 AM To: 'XMail Users Mailing List' Subject: Re: [xmail] User password Done, but it still returning the same error :( From: xmail-boun...@xmailserver.org<mailto:xmail-boun...@xmailserver.org> [mailto:xmail-boun...@xmailserver.org] On Behalf Of Chris Franklin Sent: 08 March 2013 16:00 To: XMail Users Mailing List Subject: Re: [xmail] User password Edit your mailusers.tab file and change password field to "54525253" that will make the password 1776 The password field is the third field. On Fri, Mar 8, 2013 at 10:48 AM, Barry Kavanagh mailto:barry.kavan...@onaitech.com>> wrote: Hi Fred, Thanks for your help, unfortunately port 6017 is closed I only have access using the shell prompt and don't know the Xmail admin password but I do have full root shell access. Regards Barry -Original Message- From: xmail-boun...@xmailserver.org<mailto:xmail-boun...@xmailserver.org> [mailto:xmail-boun...@xmailserver.org<mailto:xmail-boun...@xmailserver.org>] On Behalf Of Fred Sent: 08 March 2013 15:39 To: 'XMail Users Mailing List' Subject: Re: [xmail] User password I use this to control my server: http://www.webifi.com/xmail/ It talks to XMail through TCP PORT 6017 which is where XMail listen for its control protocol. You could also telnet localhost 6017 Then type "root"[ TAB]"yourpassword"[enter] Then type "userpasswd"[TAB]"domain"[TAB]"username"[TAB]"password"[enter] -Original Message- From: xmail-boun...@xmailserver.org<mailto:xmail-boun...@xmailserver.org> [mailto:xmail-boun...@xmailserver.org<mailto:xmail-boun...@xmailserver.org>] On Behalf Of Barry Kavanagh Sent: 8 mars 2013 09:00 To: xmail@xmailserver.org<mailto:xmail@xmailserver.org> Subject: [xmail] User password I have an old Xmail server running on a Gentoo Vmware box with full root access.I want to send a mail as user15 but can't remember the password.I have very basic Linux :( I am trying to reset the password for user15 I have tried entering say "user15" "XYZ" and saving the file but it does not work. How do I successfully reset this Xmail user password when the server has no X server and no web admin. ___ xmail mailing list xmail@xmailserver.org<mailto:xmail@xmailserver.org> http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org<mailto:xmail@xmailserver.org> http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org<mailto:xmail@xmailserver.org> http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail
Re: [xmail] User password
Done, but it still returning the same error L From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Chris Franklin Sent: 08 March 2013 16:00 To: XMail Users Mailing List Subject: Re: [xmail] User password Edit your mailusers.tab file and change password field to "54525253" that will make the password 1776 The password field is the third field. On Fri, Mar 8, 2013 at 10:48 AM, Barry Kavanagh wrote: Hi Fred, Thanks for your help, unfortunately port 6017 is closed I only have access using the shell prompt and don't know the Xmail admin password but I do have full root shell access. Regards Barry -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Fred Sent: 08 March 2013 15:39 To: 'XMail Users Mailing List' Subject: Re: [xmail] User password I use this to control my server: http://www.webifi.com/xmail/ It talks to XMail through TCP PORT 6017 which is where XMail listen for its control protocol. You could also telnet localhost 6017 Then type "root"[ TAB]"yourpassword"[enter] Then type "userpasswd"[TAB]"domain"[TAB]"username"[TAB]"password"[enter] -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Barry Kavanagh Sent: 8 mars 2013 09:00 To: xmail@xmailserver.org Subject: [xmail] User password I have an old Xmail server running on a Gentoo Vmware box with full root access.I want to send a mail as user15 but can't remember the password.I have very basic Linux :( I am trying to reset the password for user15 I have tried entering say "user15" "XYZ" and saving the file but it does not work. How do I successfully reset this Xmail user password when the server has no X server and no web admin. ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail
Re: [xmail] User password
>Even though I changed the password I still cannot authenticate. I can telnet >to my server on port 110. > >Regards >Barry Barry, Can you be a bit more specific ? What exactly are you trying to accomplish ? >From what you're saying, I am thinking that you want to change the password for the XMail _Superuser_ (i.e. the administrator, the user that changes/alters stuff on XMail from the 6017 command line). s. "I merely function as a channel that filters music through the chaos of noise" - Vangelis ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail
Re: [xmail] User password
Is there maybe a file with your username in it stuck in MailRoot/pop3locks Sincerely, Bart On 8-mrt.-2013, at 21:02, Barry Kavanagh wrote: > I have already rebooted the server a good few times, restarted Xmail > processes and nothing. > > From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On > Behalf Of Chris Franklin > Sent: 08 March 2013 17:08 > To: XMail Users Mailing List > Subject: Re: [xmail] User password > > It really should have worked. I just retested it on 3 of are servers. Oh well > just kill xmail's paid and restart/launch it. > > If your not clear on how to do that. Then just restart the server. If walk > you through the killing of pid and restarting XMail. But I think your a > little out of your element as it is. So rebooting should be the easiest > option for you. > > On Mar 8, 2013 12:01 PM, "Barry Kavanagh" wrote: > Thank you for the reply, > > Even though I changed the password I still cannot authenticate. I can telnet > to my server on port 110. > > Regards > Barry > > From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On > Behalf Of Chris Franklin > Sent: 08 March 2013 16:27 > To: XMail Users Mailing List > Subject: Re: [xmail] User password > > No need. It should just be active. XMail claim to index/cache data but we've > never seen this to be true. > > On Mar 8, 2013 11:25 AM, "Barry Kavanagh" wrote: > Ok password has been changed for my user, how can I stop Xmail to write the > changes? > > -Original Message- > From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] > On Behalf Of Fred > Sent: 08 March 2013 15:54 > To: 'XMail Users Mailing List' > Subject: Re: [xmail] User password > > Then you have to change the string inside the file ctrlaccounts.tab > > Use XMCrypt to generate a new password: (in bin/ folder) > > mail# ./XMCrypt test > 11001611 > > Replace the generated string in file ctrlaccounts.tab > > "root"[TAB]"11001611"[ENTER] > > You now have root access to the XMail server. You can now reset any user > passwords by following the procedure I sent you in the last reply. > > > -Original Message- > From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] > On Behalf Of Barry Kavanagh > Sent: 8 mars 2013 10:48 > To: 'XMail Users Mailing List' > Subject: Re: [xmail] User password > > Hi Fred, > > Thanks for your help, unfortunately port 6017 is closed I only have access > using the shell prompt and don't know the Xmail admin password but I do have > full root shell access. > > Regards > Barry > > -Original Message- > From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] > On Behalf Of Fred > Sent: 08 March 2013 15:39 > To: 'XMail Users Mailing List' > Subject: Re: [xmail] User password > > I use this to control my server: > > http://www.webifi.com/xmail/ > > It talks to XMail through TCP PORT 6017 which is where XMail listen for its > control protocol. > > You could also telnet localhost 6017 > > Then type "root"[ TAB]"yourpassword"[enter] Then type > "userpasswd"[TAB]"domain"[TAB]"username"[TAB]"password"[enter] > > > -Original Message- > From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] > On Behalf Of Barry Kavanagh > Sent: 8 mars 2013 09:00 > To: xmail@xmailserver.org > Subject: [xmail] User password > > I have an old Xmail server running on a Gentoo Vmware box with full root > access.I want to send a mail as user15 but can't remember the password.I > have very basic Linux :( I am trying to reset the password for user15 > > I have tried entering say "user15" "XYZ" and saving the file but it does not > work. > > How do I successfully reset this Xmail user password when the server has no > X server and no web admin. > > ___ > xmail mailing list > xmail@xmailserver.org > http://xmailserver.org/mailman/listinfo/xmail > > ___ > xmail mailing list > xmail@xmailserver.org > http://xmailserver.org/mailman/listinfo/xmail > > ___ > xmail mailing list > xmail@xmailserver.org > http://xmailserver.org/mailman/listinfo/xmail > > ___ > xmail mailing list > xmail@xmailserver.org > http://xmailserver.org/mailman/listinfo/xmail > > ___ > xmail mailing list > xmail@xmailserver.org > http://xmailserver.org/mailman/listinfo/xmail > > ___ > xmail mailing list > xmail@xmailserver.org > http://xmailserver.org/mailman/listinfo/xmail > > ___ > xmail mailing list > xmail@xmailserver.org > http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail
Re: [xmail] User password
Edit your mailusers.tab file and change password field to "54525253" that will make the password 1776 The password field is the third field. On Fri, Mar 8, 2013 at 10:48 AM, Barry Kavanagh wrote: > Hi Fred, > > Thanks for your help, unfortunately port 6017 is closed I only have access > using the shell prompt and don't know the Xmail admin password but I do > have > full root shell access. > > Regards > Barry > > -Original Message- > From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] > On Behalf Of Fred > Sent: 08 March 2013 15:39 > To: 'XMail Users Mailing List' > Subject: Re: [xmail] User password > > I use this to control my server: > > http://www.webifi.com/xmail/ > > It talks to XMail through TCP PORT 6017 which is where XMail listen for its > control protocol. > > You could also telnet localhost 6017 > > Then type "root"[ TAB]"yourpassword"[enter] Then type > "userpasswd"[TAB]"domain"[TAB]"username"[TAB]"password"[enter] > > > -Original Message- > From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] > On Behalf Of Barry Kavanagh > Sent: 8 mars 2013 09:00 > To: xmail@xmailserver.org > Subject: [xmail] User password > > I have an old Xmail server running on a Gentoo Vmware box with full root > access.I want to send a mail as user15 but can't remember the password.I > have very basic Linux :( I am trying to reset the password for user15 > > I have tried entering say "user15" "XYZ" and saving the file but it does > not > work. > > How do I successfully reset this Xmail user password when the server has no > X server and no web admin. > > ___ > xmail mailing list > xmail@xmailserver.org > http://xmailserver.org/mailman/listinfo/xmail > > ___ > xmail mailing list > xmail@xmailserver.org > http://xmailserver.org/mailman/listinfo/xmail > > ___ > xmail mailing list > xmail@xmailserver.org > http://xmailserver.org/mailman/listinfo/xmail > ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail
Re: [xmail] User password
I have already rebooted the server a good few times, restarted Xmail processes and nothing. From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Chris Franklin Sent: 08 March 2013 17:08 To: XMail Users Mailing List Subject: Re: [xmail] User password It really should have worked. I just retested it on 3 of are servers. Oh well just kill xmail's paid and restart/launch it. If your not clear on how to do that. Then just restart the server. If walk you through the killing of pid and restarting XMail. But I think your a little out of your element as it is. So rebooting should be the easiest option for you. On Mar 8, 2013 12:01 PM, "Barry Kavanagh" wrote: Thank you for the reply, Even though I changed the password I still cannot authenticate. I can telnet to my server on port 110. Regards Barry From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Chris Franklin Sent: 08 March 2013 16:27 To: XMail Users Mailing List Subject: Re: [xmail] User password No need. It should just be active. XMail claim to index/cache data but we've never seen this to be true. On Mar 8, 2013 11:25 AM, "Barry Kavanagh" wrote: Ok password has been changed for my user, how can I stop Xmail to write the changes? -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Fred Sent: 08 March 2013 15:54 To: 'XMail Users Mailing List' Subject: Re: [xmail] User password Then you have to change the string inside the file ctrlaccounts.tab Use XMCrypt to generate a new password: (in bin/ folder) mail# ./XMCrypt test 11001611 Replace the generated string in file ctrlaccounts.tab "root"[TAB]"11001611"[ENTER] You now have root access to the XMail server. You can now reset any user passwords by following the procedure I sent you in the last reply. -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Barry Kavanagh Sent: 8 mars 2013 10:48 To: 'XMail Users Mailing List' Subject: Re: [xmail] User password Hi Fred, Thanks for your help, unfortunately port 6017 is closed I only have access using the shell prompt and don't know the Xmail admin password but I do have full root shell access. Regards Barry -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Fred Sent: 08 March 2013 15:39 To: 'XMail Users Mailing List' Subject: Re: [xmail] User password I use this to control my server: http://www.webifi.com/xmail/ It talks to XMail through TCP PORT 6017 which is where XMail listen for its control protocol. You could also telnet localhost 6017 Then type "root"[ TAB]"yourpassword"[enter] Then type "userpasswd"[TAB]"domain"[TAB]"username"[TAB]"password"[enter] -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Barry Kavanagh Sent: 8 mars 2013 09:00 To: xmail@xmailserver.org Subject: [xmail] User password I have an old Xmail server running on a Gentoo Vmware box with full root access.I want to send a mail as user15 but can't remember the password.I have very basic Linux :( I am trying to reset the password for user15 I have tried entering say "user15" "XYZ" and saving the file but it does not work. How do I successfully reset this Xmail user password when the server has no X server and no web admin. ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail
Re: [xmail] User password
Hi Ben, I tried changing my password multiple times but it is just not working. I am so frustrating right now. This is what I get from a packet analysis but I know the password is correct! Packet Trace +OK <1362772686.1015...@target-domain.net> [XMail 1.22 POP3 Server] service ready; Fri, 8 Mar 2013 19:58:06 - USER use...@target-domain.net +OK Password required for use...@target-domain.net PASS user15 -ERR Invalid auth or access denied Regards Barry -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Ben Green Sent: 08 March 2013 19:28 To: XMail Users Mailing List Subject: Re: [xmail] User password Hello Barry, If you have root access to the server why not just edit the "mailusers.tab" file? That file will be located in: /var/MailRoot/ Normally, and find the line that looks a like this: "mydomain.com""username""0401080c0b"7"usernamedirectory" "U" The "0401080c0b" password is admin in plain text ;-) Once you have done that you may need to restart xmail server... this should do it: /etc/init.d/xmail restart Hope that helps :-) Benjamin. --- On Fri, 8/3/13, Barry Kavanagh wrote: > From: Barry Kavanagh > Subject: [xmail] User password > To: xmail@xmailserver.org > Date: Friday, 8 March, 2013, 14:00 > I have an old Xmail server running on > a Gentoo Vmware box with full root > access.I want to send a mail as user15 but can't remember the > password.I have very basic Linux :( I am trying to reset the password > for user15 > > I have tried entering say "user15" "XYZ" and saving the file but it > does not work. > > How do I successfully reset this Xmail user password when the server > has no X server and no web admin. > > ___ > xmail mailing list > xmail@xmailserver.org > http://xmailserver.org/mailman/listinfo/xmail > ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail
Re: [xmail] User password
It really should have worked. I just retested it on 3 of are servers. Oh well just kill xmail's paid and restart/launch it. If your not clear on how to do that. Then just restart the server. If walk you through the killing of pid and restarting XMail. But I think your a little out of your element as it is. So rebooting should be the easiest option for you. On Mar 8, 2013 12:01 PM, "Barry Kavanagh" wrote: > Thank you for the reply, > > ** ** > > Even though I changed the password I still cannot authenticate. I can > telnet to my server on port 110. > > ** ** > > Regards > > Barry > > ** ** > > *From:* xmail-boun...@xmailserver.org [mailto: > xmail-boun...@xmailserver.org] *On Behalf Of *Chris Franklin > *Sent:* 08 March 2013 16:27 > *To:* XMail Users Mailing List > *Subject:* Re: [xmail] User password > > ** ** > > No need. It should just be active. XMail claim to index/cache data but > we've never seen this to be true. > > On Mar 8, 2013 11:25 AM, "Barry Kavanagh" > wrote: > > Ok password has been changed for my user, how can I stop Xmail to write the > changes? > > -Original Message- > From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] > On Behalf Of Fred > Sent: 08 March 2013 15:54 > To: 'XMail Users Mailing List' > Subject: Re: [xmail] User password > > Then you have to change the string inside the file ctrlaccounts.tab > > Use XMCrypt to generate a new password: (in bin/ folder) > > mail# ./XMCrypt test > 11001611 > > Replace the generated string in file ctrlaccounts.tab > > "root"[TAB]"11001611"[ENTER] > > You now have root access to the XMail server. You can now reset any user > passwords by following the procedure I sent you in the last reply. > > > -Original Message- > From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] > On Behalf Of Barry Kavanagh > Sent: 8 mars 2013 10:48 > To: 'XMail Users Mailing List' > Subject: Re: [xmail] User password > > Hi Fred, > > Thanks for your help, unfortunately port 6017 is closed I only have access > using the shell prompt and don't know the Xmail admin password but I do > have > full root shell access. > > Regards > Barry > > -Original Message- > From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] > On Behalf Of Fred > Sent: 08 March 2013 15:39 > To: 'XMail Users Mailing List' > Subject: Re: [xmail] User password > > I use this to control my server: > > http://www.webifi.com/xmail/ > > It talks to XMail through TCP PORT 6017 which is where XMail listen for its > control protocol. > > You could also telnet localhost 6017 > > Then type "root"[ TAB]"yourpassword"[enter] Then type > "userpasswd"[TAB]"domain"[TAB]"username"[TAB]"password"[enter] > > > -Original Message- > From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] > On Behalf Of Barry Kavanagh > Sent: 8 mars 2013 09:00 > To: xmail@xmailserver.org > Subject: [xmail] User password > > I have an old Xmail server running on a Gentoo Vmware box with full root > access.I want to send a mail as user15 but can't remember the password.I > have very basic Linux :( I am trying to reset the password for user15 > > I have tried entering say "user15" "XYZ" and saving the file but it does > not > work. > > How do I successfully reset this Xmail user password when the server has no > X server and no web admin. > > ___ > xmail mailing list > xmail@xmailserver.org > http://xmailserver.org/mailman/listinfo/xmail > > ___ > xmail mailing list > xmail@xmailserver.org > http://xmailserver.org/mailman/listinfo/xmail > > ___ > xmail mailing list > xmail@xmailserver.org > http://xmailserver.org/mailman/listinfo/xmail > > ___ > xmail mailing list > xmail@xmailserver.org > http://xmailserver.org/mailman/listinfo/xmail > > ___ > xmail mailing list > xmail@xmailserver.org > http://xmailserver.org/mailman/listinfo/xmail > > ___ > xmail mailing list > xmail@xmailserver.org > http://xmailserver.org/mailman/listinfo/xmail > > ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail
Re: [xmail] User password
Hello Barry, If you have root access to the server why not just edit the "mailusers.tab" file? That file will be located in: /var/MailRoot/ Normally, and find the line that looks a like this: "mydomain.com""username""0401080c0b"7"usernamedirectory""U" The "0401080c0b" password is admin in plain text ;-) Once you have done that you may need to restart xmail server... this should do it: /etc/init.d/xmail restart Hope that helps :-) Benjamin. --- On Fri, 8/3/13, Barry Kavanagh wrote: > From: Barry Kavanagh > Subject: [xmail] User password > To: xmail@xmailserver.org > Date: Friday, 8 March, 2013, 14:00 > I have an old Xmail server running on > a Gentoo Vmware box with full root > access.I want to send a mail as user15 but can't remember > the password.I > have very basic Linux :( I am trying to reset the password > for user15 > > I have tried entering say "user15" "XYZ" and saving the file > but it does not > work. > > How do I successfully reset this Xmail user password when > the server has no > X server and no web admin. > > ___ > xmail mailing list > xmail@xmailserver.org > http://xmailserver.org/mailman/listinfo/xmail > ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail
Re: [xmail] User password
>Thanks Spyros. > > Do I add all of those lines or just what I need? > > Regards > Barry If you have a network, say, 192..168.10.0/24, the ctrl.ipmap.tab file should look something like this : "0.0.0.0" "0.0.0.0" "DENY" "1" "127.0.0.1" "255.255.255.255" "ALLOW" "2" "192.168.10.0" "255.255.255.0" "ALLOW" "3" Make sure that between "sentences", you press the TAB button and not the SPACE button. The above will deny everything from any machine and then explicitly allow localhost (127.0.0.1) and the 192.168.10.0/24 subnet Regards, s. "I merely function as a channel that filters music through the chaos of noise" - Vangelis ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail
Re: [xmail] User password
>Thank you for the reply, > >Even though I changed the password I still cannot authenticate. I can telnet >to my server on port 110. > >Regards >Barry There is a file under : /var/MailRoot called "ctrl.ipmap.tab" Inside this file, you should have something like the following : "0.0.0.0" "0.0.0.0" "DENY" "1" "127.0.0.1" "255.255.255.255" "ALLOW" "2" "192.168.18.0" "255.255.255.0" "ALLOW" "3" "10.0.10.0" "255.255.255..0" "ALLOW" "4" first line denies everyone second line allows localhost to connect to port 6017 third line allows subnet 192.168.18.0/24 to connect to port 6017 fourth line allows subnet 10.0.10.0/24 to connect to port 6017 HTH, s. "I merely function as a channel that filters music through the chaos of noise" - Vangelis ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail
Re: [xmail] User password
Thank you for the reply, Even though I changed the password I still cannot authenticate. I can telnet to my server on port 110. Regards Barry From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Chris Franklin Sent: 08 March 2013 16:27 To: XMail Users Mailing List Subject: Re: [xmail] User password No need. It should just be active. XMail claim to index/cache data but we've never seen this to be true. On Mar 8, 2013 11:25 AM, "Barry Kavanagh" wrote: Ok password has been changed for my user, how can I stop Xmail to write the changes? -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Fred Sent: 08 March 2013 15:54 To: 'XMail Users Mailing List' Subject: Re: [xmail] User password Then you have to change the string inside the file ctrlaccounts.tab Use XMCrypt to generate a new password: (in bin/ folder) mail# ./XMCrypt test 11001611 Replace the generated string in file ctrlaccounts.tab "root"[TAB]"11001611"[ENTER] You now have root access to the XMail server. You can now reset any user passwords by following the procedure I sent you in the last reply. -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Barry Kavanagh Sent: 8 mars 2013 10:48 To: 'XMail Users Mailing List' Subject: Re: [xmail] User password Hi Fred, Thanks for your help, unfortunately port 6017 is closed I only have access using the shell prompt and don't know the Xmail admin password but I do have full root shell access. Regards Barry -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Fred Sent: 08 March 2013 15:39 To: 'XMail Users Mailing List' Subject: Re: [xmail] User password I use this to control my server: http://www.webifi.com/xmail/ It talks to XMail through TCP PORT 6017 which is where XMail listen for its control protocol. You could also telnet localhost 6017 Then type "root"[ TAB]"yourpassword"[enter] Then type "userpasswd"[TAB]"domain"[TAB]"username"[TAB]"password"[enter] -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Barry Kavanagh Sent: 8 mars 2013 09:00 To: xmail@xmailserver.org Subject: [xmail] User password I have an old Xmail server running on a Gentoo Vmware box with full root access.I want to send a mail as user15 but can't remember the password.I have very basic Linux :( I am trying to reset the password for user15 I have tried entering say "user15" "XYZ" and saving the file but it does not work. How do I successfully reset this Xmail user password when the server has no X server and no web admin. ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail gentoo.png Description: Binary data outlook_message.png Description: Binary data ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail
Re: [xmail] User password
- Original Message - > From: Barry Kavanagh > To: 'XMail Users Mailing List' > Cc: > Sent: Friday, 8 March 2013, 17:48 > Subject: Re: [xmail] User password > > Hi Fred, > > Thanks for your help, unfortunately port 6017 is closed I only have access > using the shell prompt and don't know the Xmail admin password but I do have > full root shell access. > > Regards > Barry ssh to the machine, then from the shell : telnet localhost 6017 s. "I merely function as a channel that filters music through the chaos of noise" - Vangelis ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail
Re: [xmail] User password
No need. It should just be active. XMail claim to index/cache data but we've never seen this to be true. On Mar 8, 2013 11:25 AM, "Barry Kavanagh" wrote: > Ok password has been changed for my user, how can I stop Xmail to write the > changes? > > -Original Message- > From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] > On Behalf Of Fred > Sent: 08 March 2013 15:54 > To: 'XMail Users Mailing List' > Subject: Re: [xmail] User password > > Then you have to change the string inside the file ctrlaccounts.tab > > Use XMCrypt to generate a new password: (in bin/ folder) > > mail# ./XMCrypt test > 11001611 > > Replace the generated string in file ctrlaccounts.tab > > "root"[TAB]"11001611"[ENTER] > > You now have root access to the XMail server. You can now reset any user > passwords by following the procedure I sent you in the last reply. > > > -Original Message- > From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] > On Behalf Of Barry Kavanagh > Sent: 8 mars 2013 10:48 > To: 'XMail Users Mailing List' > Subject: Re: [xmail] User password > > Hi Fred, > > Thanks for your help, unfortunately port 6017 is closed I only have access > using the shell prompt and don't know the Xmail admin password but I do > have > full root shell access. > > Regards > Barry > > -Original Message----- > From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] > On Behalf Of Fred > Sent: 08 March 2013 15:39 > To: 'XMail Users Mailing List' > Subject: Re: [xmail] User password > > I use this to control my server: > > http://www.webifi.com/xmail/ > > It talks to XMail through TCP PORT 6017 which is where XMail listen for its > control protocol. > > You could also telnet localhost 6017 > > Then type "root"[ TAB]"yourpassword"[enter] Then type > "userpasswd"[TAB]"domain"[TAB]"username"[TAB]"password"[enter] > > > -Original Message- > From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] > On Behalf Of Barry Kavanagh > Sent: 8 mars 2013 09:00 > To: xmail@xmailserver.org > Subject: [xmail] User password > > I have an old Xmail server running on a Gentoo Vmware box with full root > access.I want to send a mail as user15 but can't remember the password.I > have very basic Linux :( I am trying to reset the password for user15 > > I have tried entering say "user15" "XYZ" and saving the file but it does > not > work. > > How do I successfully reset this Xmail user password when the server has no > X server and no web admin. > > ___ > xmail mailing list > xmail@xmailserver.org > http://xmailserver.org/mailman/listinfo/xmail > > ___ > xmail mailing list > xmail@xmailserver.org > http://xmailserver.org/mailman/listinfo/xmail > > ___ > xmail mailing list > xmail@xmailserver.org > http://xmailserver.org/mailman/listinfo/xmail > > ___ > xmail mailing list > xmail@xmailserver.org > http://xmailserver.org/mailman/listinfo/xmail > > ___ > xmail mailing list > xmail@xmailserver.org > http://xmailserver.org/mailman/listinfo/xmail > ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail
Re: [xmail] User password
Ok password has been changed for my user, how can I stop Xmail to write the changes? -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Fred Sent: 08 March 2013 15:54 To: 'XMail Users Mailing List' Subject: Re: [xmail] User password Then you have to change the string inside the file ctrlaccounts.tab Use XMCrypt to generate a new password: (in bin/ folder) mail# ./XMCrypt test 11001611 Replace the generated string in file ctrlaccounts.tab "root"[TAB]"11001611"[ENTER] You now have root access to the XMail server. You can now reset any user passwords by following the procedure I sent you in the last reply. -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Barry Kavanagh Sent: 8 mars 2013 10:48 To: 'XMail Users Mailing List' Subject: Re: [xmail] User password Hi Fred, Thanks for your help, unfortunately port 6017 is closed I only have access using the shell prompt and don't know the Xmail admin password but I do have full root shell access. Regards Barry -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Fred Sent: 08 March 2013 15:39 To: 'XMail Users Mailing List' Subject: Re: [xmail] User password I use this to control my server: http://www.webifi.com/xmail/ It talks to XMail through TCP PORT 6017 which is where XMail listen for its control protocol. You could also telnet localhost 6017 Then type "root"[ TAB]"yourpassword"[enter] Then type "userpasswd"[TAB]"domain"[TAB]"username"[TAB]"password"[enter] -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Barry Kavanagh Sent: 8 mars 2013 09:00 To: xmail@xmailserver.org Subject: [xmail] User password I have an old Xmail server running on a Gentoo Vmware box with full root access.I want to send a mail as user15 but can't remember the password.I have very basic Linux :( I am trying to reset the password for user15 I have tried entering say "user15" "XYZ" and saving the file but it does not work. How do I successfully reset this Xmail user password when the server has no X server and no web admin. ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail
Re: [xmail] User password
I don't remember for sure that this worked, but I think what I had done in the past was edit the users file which has the encrypted passwords in it and just copy paste an encrypted password that I remembered to the one I was trying to set, then restart xmail. Seems like I did something like that in the past. From: xmail-boun...@xmailserver.org [xmail-boun...@xmailserver.org] on behalf of Barry Kavanagh [barry.kavan...@onaitech.com] Sent: Friday, March 08, 2013 9:48 AM To: 'XMail Users Mailing List' Subject: Re: [xmail] User password Hi Fred, Thanks for your help, unfortunately port 6017 is closed I only have access using the shell prompt and don't know the Xmail admin password but I do have full root shell access. Regards Barry -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Fred Sent: 08 March 2013 15:39 To: 'XMail Users Mailing List' Subject: Re: [xmail] User password I use this to control my server: http://www.webifi.com/xmail/ It talks to XMail through TCP PORT 6017 which is where XMail listen for its control protocol. You could also telnet localhost 6017 Then type "root"[ TAB]"yourpassword"[enter] Then type "userpasswd"[TAB]"domain"[TAB]"username"[TAB]"password"[enter] -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Barry Kavanagh Sent: 8 mars 2013 09:00 To: xmail@xmailserver.org Subject: [xmail] User password I have an old Xmail server running on a Gentoo Vmware box with full root access.I want to send a mail as user15 but can't remember the password.I have very basic Linux :( I am trying to reset the password for user15 I have tried entering say "user15" "XYZ" and saving the file but it does not work. How do I successfully reset this Xmail user password when the server has no X server and no web admin. ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail
Re: [xmail] User password
Then you have to change the string inside the file ctrlaccounts.tab Use XMCrypt to generate a new password: (in bin/ folder) mail# ./XMCrypt test 11001611 Replace the generated string in file ctrlaccounts.tab "root"[TAB]"11001611"[ENTER] You now have root access to the XMail server. You can now reset any user passwords by following the procedure I sent you in the last reply. -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Barry Kavanagh Sent: 8 mars 2013 10:48 To: 'XMail Users Mailing List' Subject: Re: [xmail] User password Hi Fred, Thanks for your help, unfortunately port 6017 is closed I only have access using the shell prompt and don't know the Xmail admin password but I do have full root shell access. Regards Barry -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Fred Sent: 08 March 2013 15:39 To: 'XMail Users Mailing List' Subject: Re: [xmail] User password I use this to control my server: http://www.webifi.com/xmail/ It talks to XMail through TCP PORT 6017 which is where XMail listen for its control protocol. You could also telnet localhost 6017 Then type "root"[ TAB]"yourpassword"[enter] Then type "userpasswd"[TAB]"domain"[TAB]"username"[TAB]"password"[enter] -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Barry Kavanagh Sent: 8 mars 2013 09:00 To: xmail@xmailserver.org Subject: [xmail] User password I have an old Xmail server running on a Gentoo Vmware box with full root access.I want to send a mail as user15 but can't remember the password.I have very basic Linux :( I am trying to reset the password for user15 I have tried entering say "user15" "XYZ" and saving the file but it does not work. How do I successfully reset this Xmail user password when the server has no X server and no web admin. ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail
Re: [xmail] User password
Hi Fred, Thanks for your help, unfortunately port 6017 is closed I only have access using the shell prompt and don't know the Xmail admin password but I do have full root shell access. Regards Barry -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Fred Sent: 08 March 2013 15:39 To: 'XMail Users Mailing List' Subject: Re: [xmail] User password I use this to control my server: http://www.webifi.com/xmail/ It talks to XMail through TCP PORT 6017 which is where XMail listen for its control protocol. You could also telnet localhost 6017 Then type "root"[ TAB]"yourpassword"[enter] Then type "userpasswd"[TAB]"domain"[TAB]"username"[TAB]"password"[enter] -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Barry Kavanagh Sent: 8 mars 2013 09:00 To: xmail@xmailserver.org Subject: [xmail] User password I have an old Xmail server running on a Gentoo Vmware box with full root access.I want to send a mail as user15 but can't remember the password.I have very basic Linux :( I am trying to reset the password for user15 I have tried entering say "user15" "XYZ" and saving the file but it does not work. How do I successfully reset this Xmail user password when the server has no X server and no web admin. ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail
Re: [xmail] User password
I use this to control my server: http://www.webifi.com/xmail/ It talks to XMail through TCP PORT 6017 which is where XMail listen for its control protocol. You could also telnet localhost 6017 Then type "root"[ TAB]"yourpassword"[enter] Then type "userpasswd"[TAB]"domain"[TAB]"username"[TAB]"password"[enter] -Original Message- From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On Behalf Of Barry Kavanagh Sent: 8 mars 2013 09:00 To: xmail@xmailserver.org Subject: [xmail] User password I have an old Xmail server running on a Gentoo Vmware box with full root access.I want to send a mail as user15 but can't remember the password.I have very basic Linux :( I am trying to reset the password for user15 I have tried entering say "user15" "XYZ" and saving the file but it does not work. How do I successfully reset this Xmail user password when the server has no X server and no web admin. ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail
[xmail] User password
I have an old Xmail server running on a Gentoo Vmware box with full root access.I want to send a mail as user15 but can't remember the password.I have very basic Linux :( I am trying to reset the password for user15 I have tried entering say "user15" "XYZ" and saving the file but it does not work. How do I successfully reset this Xmail user password when the server has no X server and no web admin. ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail
