> Robin Cook wrote:
> > I am using evdev.
> >
> > Section "InputDevice"
> > Identifier "Keyboard0"
> > Driver "kbd"
> > Option "XkbModel" "evdev"
> > Option "XkbLayout" "us"
> > Option "XkbVariant" "dvorak"
> > Option "XkbR
Dne petek 14. novembra 2008 je Peter Hutterer napisal(a):
> devices configured in the xorg.conf are not hotplug-capable.
So the proper way would be to migrate the whole InputDevice mouse section to
an .fdi file for HAL to handle?
> that's because a VT switch disables all devices and then re-enab
Thank you Daniel, I've check my directory and /dev/tty2 is there. But I
think it's a non existent device. About this virtual console, do I need to
point the virtual console to my /dev/fb0? If so, how do I do it? I even
tried ln to make the tty2 to my fb0. But it doesnt seem to work. When I do
t
On Fri, Nov 14, 2008 at 10:24:34AM +0800, Leandro Galvez wrote:
> Fatal server error:
> xf86OpenConsole: Cannot open virtual console 2 (No such file or directory)
Normally I wouldn't reward posting four mails in the space of an hour or
something equally pathological (please never do that to
Hi All,
I am trying to run Xorg on my arm target device. It has no physical display
device so I just enabled linux virtual framebuffer. But when I try to run the
xserver, I get the message "Cannot open virtual console 2". How do I get rid of
this fatal error message preventing me to startup
Sorry I should name this thread as Xorg over Virtual Framebuffer.
- Original Message -
From: Leandro Galvez
To: xorg@lists.freedesktop.org
Sent: Friday, November 14, 2008 9:36 AM
Subject: Xvfb over Linux Virtual Framebuffer Driver
Hi All,
I am trying to run Xorg on m
Hi guys,
Really need your help on this. Please help. In case you need to analyse my
complete input and output files, attached is my config file and my output log
file below.
Thanks and best regards,
Andy
CONFIG FILE
Section "Device"
Identifier "FBDevice"
Driver "fbdev"
Hi All,
I am trying to run Xorg on my arm target device. It has no physical display
device so I just enabled linux virtual framebuffer. But when I try to run the
xserver, I get the message "Cannot open virtual console 2". How do I get rid of
this fatal error message preventing me to startup
Synaptics 1.0 RC 1
Including features such as:
- better auto-calibration
- input property support
- new elantech touchpad support
Cheers,
Peter
Andre Herms (1):
[syndaemon] use Xrecord extension in syndaemon to avoid polling.
Christoph Brill (3):
Init x/y valuators with the axis r
Hi all,
I'm playing with using Xephyr for an emulator for the Sugar desktop (OLPC
stuff), I am attempting to bind a specific mouse (event input) to Xephyr
and made had some progress.
However the biggest problem is that I can only get Xephyr to attach an
event source if it is run as root. ie:
--
su
On Thu, Nov 13, 2008 at 11:56:09PM +, Clarke Wixon wrote:
> Device 'Touchkit HID-USB Touchscreen':
> Device Enabled:1
> Middle Button Emulation:2
> Middle Button Timeout:50
> Wheel Emulation Inertia:10
> Wheel Emulation:0
> Wheel E
On Fri, Nov 14, 2008 at 12:44:20AM +0100, Matija Šuklje wrote:
> I noticed that when I unplug my USB mouse and later plug it back in, it
> doesn't work in X anymore/again.
devices configured in the xorg.conf are not hotplug-capable.
> An odd workaround I found and use now is that it works if af
Robin Cook wrote:
> I am using evdev.
>
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "kbd"
> Option "XkbModel" "evdev"
> Option "XkbLayout" "us"
> Option "XkbVariant" "dvorak"
> Option "XkbRules" "Xorg"
> EndSec
On Thu, Nov 13, 2008 at 05:40:20PM -0600, Robin Cook wrote:
> I am using evdev.
>
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "kbd"
> Option "XkbModel" "evdev"
> Option "XkbLayout" "us"
> Option "XkbVariant" "dvorak"
>
This has me stumped.
How can I set touchscreen calibration limits using evdev? This is on x.org 7.4
with hal input device autoconfiguration (specifically, Ubuntu 8.10 with the
packages from the default repositories).
I can see evdev does know SOMETHING about calibration, because the command
"xin
Hullo.
I noticed that when I unplug my USB mouse and later plug it back in, it
doesn't work in X anymore/again.
An odd workaround I found and use now is that it works if after I plug it back
in I switch to a VT and back to the X session.
Here's the relevant 'xorg.conf' section:
---[snip]---
Se
I am using evdev.
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "evdev"
Option "XkbLayout" "us"
Option "XkbVariant" "dvorak"
Option "XkbRules" "Xorg"
EndSection
gnome keyboard config also shows
On Thu, Nov 13, 2008 at 02:03:10PM +0100, Nicolas Mailhot wrote:
> Le Jeu 13 novembre 2008 12:25, Robin Cook a écrit :
> > Since upgrading the up arrow key has not been working on my system and
> > I
> > am unable to figure out how to fix it. When I press the up arrow key
> > it causes the gnome
Quite a few fixes in this relative to 2.5.0, recommended for anyone currently
using the 2.5.x series.
Thanks,
Jesse
Adam Jackson (1):
Quirk: No LVDS on Dell Studio Hybrid
Carl Worth (1):
Ignore intel_gtt binary
Dave Airlie (1):
Default kernel mode setting to off, add configure
Hopefully this is the last 2.4.x release. This one just includes a few
changes relative to 2.4.2, but the G4x stolen memory bit is an important
one.
Adam Jackson (1):
Quirk: No LVDS on Dell Studio Hybrid
Carl Worth (1):
Disable frame buffer compression by default for GM965.
Eric Anh
> We just need to accelerate gradients, and is where any effort in
> software should occur. It's on our schedule, but not for quite a while.
> Setting up the X Server to allow drivers to request gradients was easy
> last time I did it, though I've misplaced the branch it looks like.
> Then someone
On Thu, 2008-11-13 at 14:30 +0100, Clemens Eisserer wrote:
> Hi,
>
> I've experienced some performance problems with gradients when working
> on the xrender/java2d backend.
>
> A typical problematic case is when mask and desitation picture were in
> VRAM, and a gradient is used as source.
> As fa
Hi all,
I'm playing with using Xephyr for an emulator for the Sugar desktop (OLPC
stuff), I am attempting to bind a specific mouse (event input) to Xephyr
and made had some progress.
However the biggest problem is that I can only get Xephyr to attach an
event source if it is run as root. ie:
--
su
On 05:25 Thu 13 Nov , Robin Cook wrote:
> Since upgrading the up arrow key has not been working on my system and I
> am unable to figure out how to fix it. When I press the up arrow key
> it causes the gnome snapshot app to open.
Try this xorg-server patch from Peter Hutterer that is in Fedo
Michel Dänzer escribió:
> On Mon, 2008-11-10 at 13:37 -0500, Alex Villacís Lasso wrote:
>
>> The question is: is there any xserver support that might enable a driver
>> to get pixmap data into either kind of situation? Either get the pixmap
>> into physically contiguous pages and obtain the p
Hey,
I've updated the patch again here at the hackfest, and as far as I'm
concerned the patch can go in now. But I'd like you to ok it before I
push it.
We decided to prefix the non-seperable blend-modes with "HSL" to avoid
the confusion with the SATURATE operator. Otherwise I've used the
exact n
I can confirm that it works on my DG45FC. Yieehaa!
/Magnus H
___
xorg mailing list
xorg@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/xorg
Hi,
In xserver/os/connection.c this or'ing with a bitmask should be an 'and', I
think?
--- save_connection.c 2008-11-13 15:33:52.0 +
+++ connection.c2008-11-13 15:34:32.0 +
@@ -665,7 +665,7 @@
/* Allow any client to connect without authorization on a launch
On Thu, Nov 13, 2008 at 7:54 AM, Simon Thum <[EMAIL PROTECTED]> wrote:
> Gene Heskett wrote:
>> But its not that simple either, cuz when running the radeon driver, I get
>> random screen blanking for 1-10 seconds at a time, and for a change it
>> doesn't seem to be tied to the time of day since its
Hi,
On Thu, Nov 13, 2008 at 01:45:03PM +0100, Danny Kukawka wrote:
> Second: it's IMO the wrong way to use HAL as a config store for X at all.
> Yes,
> there are ppl. saying: "Also other tools can use this information." but in
> fact there are no other tools, except X, which need them. X should
iain a écrit :
> On Thu, 2008-11-13 at 17:03 +0500, Alexei Babich wrote:
>> Hi, all.
>> Can anybody tell me, where I can find examples of the simple usage of the
>> Xcomposite extension? For example, implementations of save_unders,
>> backing_store, anything else, etc.
>> Articles, books, howtos,
Hi,
I've experienced some performance problems with gradients when working
on the xrender/java2d backend.
A typical problematic case is when mask and desitation picture were in
VRAM, and a gradient is used as source.
As far as I understand this causes mask and dst to be moved out into
sysmem, the
Le Jeu 13 novembre 2008 12:25, Robin Cook a écrit :
> Since upgrading the up arrow key has not been working on my system and
> I
> am unable to figure out how to fix it. When I press the up arrow key
> it causes the gnome snapshot app to open.
>
> Attached is the output from xev.
>
> I started
Gene Heskett wrote:
> But its not that simple either, cuz when running the radeon driver, I get
> random screen blanking for 1-10 seconds at a time, and for a change it
> doesn't seem to be tied to the time of day since its doing it right now and
> it is 10 pm.
I'm experiencing the exact same th
On Thu, 2008-11-13 at 17:03 +0500, Alexei Babich wrote:
> Hi, all.
> Can anybody tell me, where I can find examples of the simple usage of the
> Xcomposite extension? For example, implementations of save_unders,
> backing_store, anything else, etc.
> Articles, books, howtos,...
>
> Thank you.
h
Hi, all.
Can anybody tell me, where I can find examples of the simple usage of the
Xcomposite extension? For example, implementations of save_unders,
backing_store, anything else, etc.
Articles, books, howtos,...
Thank you.
--
Regards,
Alexei Babich, circuit engineer, OOO NPP "Rezonans", Chelya
Hi,
Running `strace pdfedit *.pdf' this happens after filedescriptor 3 binds the X
unix socket:
gettimeofday({1226575688, 33}, NULL) = 0
socket(PF_FILE, SOCK_STREAM, 0) = 3
connect(3, {sa_family=AF_FILE, path=@"/tmp/.X11-unix/X0"...}, 20) = 0
getpeername(3, {sa_family=AF_FILE, path=@
Since upgrading the up arrow key has not been working on my system and I
am unable to figure out how to fix it. When I press the up arrow key
it causes the gnome snapshot app to open.
Attached is the output from xev.
I started xev then moved the mouse over the close button of the xev
window
* Matthias Hopf wrote:
> Guys,
>
> who (or which group) is currently doing membership and account requests?
> I wanted my student from VoC 2007 have its project published on git.fdo,
> but his request for an account sits uncommented there since September:
mine is pending since august (sponsored b
Guys,
who (or which group) is currently doing membership and account requests?
I wanted my student from VoC 2007 have its project published on git.fdo,
but his request for an account sits uncommented there since September:
http://bugs.freedesktop.org/show_bug.cgi?id=17663
Any changes in the proc
On Nov 12, 08 13:00:03 -0500, Gene Heskett wrote:
> On Wednesday 12 November 2008, Matthias Hopf wrote:
> >On Nov 11, 08 14:02:00 -0500, Gene Heskett wrote:
> >> Anyway, where is (url to sub) the radeondh list?
> >
> >To subscribe, e-mail: [EMAIL PROTECTED]
> >
> But that address rejected my mail,
On Wed, Nov 12, 2008 at 11:17:32 -0500, Ken Mandelberg wrote:
> I'm running an 945GM on Ubuntu 8.10 which uses version 2.4.1 of the
> Intel driver. I'm getting occasional tearing on HD video that I didn't
> get on Ubuntu 8.04. I've seen some reports of tearing on this list, but
> don't known if
42 matches
Mail list logo
