Re: [zd1211-devs] 2.6.18-rc1: zd1211rw doesn't work yet?

2006-07-10 Thread Daniel Drake 
Harald Dunkel wrote:
 Hi Daniel,
 
 Sorry, of course I should have included more information
 about the network configuration. Here is the entry in
 /etc/network/interfaces:

Please drop the distro configuration and try using normal 
ifconfig/iwconfig commands on the command line.

Daniel



-
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642
___
Zd1211-devs mailing list - http://zd1211.ath.cx/
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs

Re: [zd1211-devs] 2.6.18-rc1: zd1211rw doesn't work yet?

2006-07-09 Thread C.S: 
IIRC zd1211rw uses ethx instead of wlanx. Unfortunately i hadn't much 
time in testing the new code.

Regards

Christian

 Date: Sat, 08 Jul 2006 22:58:43 +0200
 From: Harald Dunkel [EMAIL PROTECTED]
 Subject: [zd1211-devs] 2.6.18-rc1: zd1211rw doesn't work yet?
 To: Zd1211-devs@lists.sourceforge.net
 Message-ID: [EMAIL PROTECTED]
 Content-Type: text/plain; charset=iso-8859-1

 Hi folks,

 I have used the external zd1211 driver for months without problems,
 but the integrated version in 2.6.18-rc1 does not work for me.

 iwconfig says:

 wlan0 802.11g zd1211  ESSID:
   Mode:Managed  Frequency:2.412 GHz  Access Point: Invalid
   Bit Rate=1 Mb/s
   Encryption key:------XX   Security mode:open
   Link Quality:0  Signal level:0  Noise level:0
   Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
   Tx excessive retries:0  Invalid misc:0   Missed beacon:0

 I had expected something like this (running iwconfig for 2.6.17.3
 + zd1211 rev80):

 wlan0 802.11b/g NIC  ESSID:harrinet
   Mode:Managed  Frequency=2.432 GHz  Access Point: XX:XX:XX:XX:XX:XX
   Bit Rate:54 Mb/s
   Retry:off   RTS thr=2432 B   Fragment thr:off
   Encryption key:------**   Security mode:open
   Power Management:off
   Link Quality=84/100  Signal level=55/100  Noise level=0/100
   Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:44
   Tx excessive retries:145  Invalid misc:0   Missed beacon:0

 Please note that there is no MAC for 2.6.18-rc1.

 ???


 Any hint would be highly appreciated. Of course I would be glad to
 help debugging.


 Regards

 Harri
   






___ 
Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier anmelden: 
http://mail.yahoo.de



-
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642
___
Zd1211-devs mailing list - http://zd1211.ath.cx/
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs

Re: [zd1211-devs] 2.6.18-rc1: zd1211rw doesn't work yet?

2006-07-09 Thread Daniel Drake 
Harald Dunkel wrote:
 iwconfig says:
 
 wlan0 802.11g zd1211  ESSID:
   Mode:Managed  Frequency:2.412 GHz  Access Point: Invalid
   Bit Rate=1 Mb/s
   Encryption key:------XX   Security mode:open
   Link Quality:0  Signal level:0  Noise level:0
   Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
   Tx excessive retries:0  Invalid misc:0   Missed beacon:0

Looks like you didn't specify an essid.

Which exact commands are you running before looking at the above output?

 Please note that there is no MAC for 2.6.18-rc1.

What do you mean by this?

Daniel



-
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642
___
Zd1211-devs mailing list - http://zd1211.ath.cx/
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs