Re: [zd1211-devs] AR5007UG WLAN USB card, not working by now?!
Hi Daniel! I finally got this card working with the driver you mentioned (vendor).. works not very well, but I can find wlans. I used the patch on the page and was able to compile it. Thanks a lot! Anyway, if your code is ready please inform me. Best regards, Björn - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
Re: [zd1211-devs] AR5007UG WLAN USB card, not working by now?!
Björn, could you provide us with the output of cat /proc/version, we need the kernel version. It appears that the kernel version is to old. The RF is supported in newer kernels. Kind regards, Ulrich Am 15.05.2007 um 10:55 schrieb Björn Tappert: Hi! I am using a laptop with an build in AR5007UG wireless lan card: lsusb says: Bus 1 Device 2: ID 0ace:1215 ZyDAS I used zd1211b first: I got my device to be found (iwconfig), but it didn't work correctly (bit rate was at 1, I could not find wlans...). I finally gave it up. I tried the zd1211rw than: with modprobe zd1211rw I got (dmesg): ... zd1211rw 1-1:1.0: RF UW2453_RF 0x9 is not supported ... And on your page (http://zd1211.ath.cx/wiki/RfTypes) I saw that your are working on that chip. So is there a change to get it run by now? When not how long do you think it will take? Did anybody get it working with special settings or so? Thanks in advise! Björn -- --- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs -- Uli Kunitz - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
Re: [zd1211-devs] AR5007UG WLAN USB card, not working by now?!
Hi! If I use the vendor based community driver (zd1211.ath.cx/wiki/ vendorbaseddriver), use the zd1211b support in Makefile, an do as on page described I get: [dmesg] eth0: no IPv6 routers present ZD1211B - http://zd1211.ath.cx/ - r85 Based on www.zydas.com.tw driver version 2.5.0.0 usb 2-1: reset high speed USB device using ehci_hcd and address 2 Release Ver = 4810 zd1211:bulk out: wMaxPacketSize = 200 zd1211:bulk in: wMaxPacketSize = 200 zd1211:interrupt in: wMaxPacketSize = 40 zd1211:interrupt in: int_interval = 1 zd1211:interrupt out: wMaxPacketSize = 40 EEPORM Ver = 4810 zd1211:USB Download Boot code success zd1211:MAC address = 00:60:b3:36:dd:27 zd1211:AddrEntryTable = f7c6 zd1211:RF_Mode = 2109 PA type: 0 GCT RF zd1211:Mixed Mode zd1211:AllowedChannel = 07ff zd1211:LinkLEDn = 200 AllowedChannel = 000107ff Region:48 zd1205: (exit) zd1205_config, /root/AR5007UG/zd1211-driver-r85/src/ zd1205.c line 2607 zd1205: (exit) zd1205_init, /root/AR5007UG/zd1211-driver-r85/src/zd1205.c line 8582 usbcore: registered new interface driver zd1211b zd1205: (enter) zd1205_open, /root/AR5007UG/zd1211-driver-r85/src/zd1205.c line 4359 zd1205: (exit) zd1205_open, /root/AR5007UG/zd1211-driver-r85/src/zd1205.c line 4442 ADDRCONF(NETDEV_UP): wlan0: link is not ready [/dmesg] [iwconfig] lono wireless extensions. eth0 no wireless extensions. wlan0 802.11b/g NIC ESSID: Mode:Managed Frequency=2.462 GHz Access Point: Not-Associated Bit Rate:1 Mb/s Retry:off RTS thr=2432 B Fragment thr:off Encryption key:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 [/iwconfig] [/var/log/messages] May 15 22:47:06 (none) kernel: ZD1211B - http://zd1211.ath.cx/ - r85 May 15 22:47:06 (none) kernel: Based on www.zydas.com.tw driver version 2.5.0.0 May 15 22:47:06 (none) kernel: usb 2-1: reset high speed USB device using ehci_hcd and address 2 May 15 22:47:06 (none) kernel: Release Ver = 4810 May 15 22:47:06 (none) kernel: EEPORM Ver = 4810 May 15 22:47:07 (none) kernel: usbcore: registered new interface driver zd1211b May 15 22:47:29 (none) kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready [/messages] And now cat /proc/version as requested: Linux version 2.6.20-BT-PwnSauce-NOSMP ([EMAIL PROTECTED]) (gcc version 3.4.6) #3 Sat Feb 24 15:52:59 GMT 2007 Thanks for your help! Björn - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
Re: [zd1211-devs] AR5007UG WLAN USB card, not working by now?!
Björn Tappert wrote: What makes me mad is that on this page (http://zd1211.ath.cx/) it says, my card is supported: Read again -- the hardware listed there is *not* supported by zd1211rw. Medion 98300 Laptop Integratedzd1211b * 0ace:1215 UW2453 I only added this entry a couple of hours ago. It almost got it working on this way, I saw it on iwconfig. But as I said I could not change the bit rate, and didn't find a wlan, so it probably didn't If you saw something on iwconfig then it wasn't the zd1211rw device. zd1211rw will bail out before a netdevice is created, because it doesn't support UW2453. You're not close to getting this device working with zd1211rw, sorry. Contrary to what Ulrich said in his last mail, UW2453 is currently *not* supported in any kernel releases. I have one of these devices but have been unable to get my zd1211rw RF code working reliably. I will resume my efforts in the next few days and will submit the code when ready. Daniel - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
Re: [zd1211-devs] AR5007UG WLAN USB card, not working by now?!
Daniel Drake dsd at gentoo.org writes: Read again -- the hardware listed there is *not* supported by zd1211rw. Damn your right, I read it *was* supported -.- sorry It almost got it working on this way, I saw it on iwconfig. But as I said I could not change the bit rate, and didn't find a wlan, so it probably didn't If you saw something on iwconfig then it wasn't the zd1211rw device. zd1211rw will bail out before a netdevice is created, because it doesn't support UW2453. You're not close to getting this device working with zd1211rw, sorry. I got it running on iwconfig with the zd1211b driver. I posted it here. Björn - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
Re: [zd1211-devs] AR5007UG WLAN USB card, not working by now?!
Thank you very much, I will try so! Björn - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
Re: [zd1211-devs] AR5007UG WLAN USB card, not working by now?!
Uli Kunitz wrote: So at the moment your only chance will be to recompile the zd1211rw git branch of my wireless-dev git tree. Some additional information can be found here: http://linuxwireless.org/en/users/Drivers/zd1211rw This code is known not to work very well, hence me not pushing it upstream yet. Feel free to try it though. Hi! If I use the vendor based community driver (zd1211.ath.cx/wiki/ vendorbaseddriver), use the zd1211b support in Makefile, an do as on page described I get: As I said in an earlier mail: use the vendor driver, not the community one. The community one doesn't support UW2453. Daniel - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs