--- On Wed, 8/10/08, Sundar Visvanathan <[EMAIL PROTECTED]> wrote:
> I got the dongle to work inconsistently on
> "2.6.22.18-omap1" ,configured the
> same as earlier in the post.The dongle works fresh out of
> the box.But on
> second and consecutive attempts it stops working and goes
> into reset m
I got the dongle to work inconsistently on "2.6.22.18-omap1" ,configured the
same as earlier in the post.The dongle works fresh out of the box.But on
second and consecutive attempts it stops working and goes into reset mode.
fail log:
hub 1-1:1.0: state 7 ports 4 chg evt 0008
hub 1-1:1.0: po
>usb 1-1.1: request_fw_file() fw name zd1211/zd1211b_ub
>usb 1-1.1: upload_firmware() firmware device id 0x4810 is equal to the
actual device id
>usb 1-1.1: request_fw_file() fw name zd1211/zd1211b_uphr
>usb 1-1.1: upload_code() transfer size 4096
>usb 1-1.1: upload_code() transfer size 1024
>usb 1
When you plug the dongle in at the first time,the firmware files get uploaded
in the correct way(ref: first section of dmesg log). It errors out when you
do an 'ifconfig' subsequently. My firmware files are located in
/lib/firmware/zd1211/.
thanks for the reply.
Sundar
Hin-Tak Leung-3 wrote:
>
--- On Tue, 7/10/08, Sundar Visvanathan <[EMAIL PROTECTED]> wrote:
> usb 1-1.1: USB control request for firmware upload failed.
> Error number -110
>
> usb 1-1.1: Could not upload firmware code uph. Error number
> -110
> zd1211rw 1-1.1:1.0: couldn't load firmware. Error
> number -110
firmware up
