Re: [zfs-discuss] Unable to import exported zpool on a new server
hi are the disk/sas controller the same on both server? -LT Sent from my iPad On Mar 13, 2012, at 6:10, P-O Yliniemi p...@bsd-guide.net wrote: Hello, I'm currently replacing a temporary storage server (server1) with the one that should be the final one (server2). To keep the data storage from the old one I'm attempting to import it on the new server. Both servers are running OpenIndiana server build 151a. Server 1 (old) The zpool consists of three disks in a raidz1 configuration: # zpool status pool: storage state: ONLINE scan: none requested config: NAMESTATE READ WRITE CKSUM storage ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 c4d0ONLINE 0 0 0 c4d1ONLINE 0 0 0 c5d0ONLINE 0 0 0 errors: No known data errors Output of format command gives: # format AVAILABLE DISK SELECTIONS: 0. c2t1d0 LSILOGIC-LogicalVolume-3000 cyl 60785 alt 2 hd 255 sec 126 /pci@0,0/pci8086,25e2@2/pci8086,350c@0,3/pci103c,3015@6/sd@1,0 1. c4d0 ST3000DM- W1F07HW-0001-2.73TB /pci@0,0/pci-ide@1f,2/ide@0/cmdk@0,0 2. c4d1 ST3000DM- W1F05H2-0001-2.73TB /pci@0,0/pci-ide@1f,2/ide@0/cmdk@1,0 3. c5d0 ST3000DM- W1F032R-0001-2.73TB /pci@0,0/pci-ide@1f,2/ide@1/cmdk@0,0 4. c5d1 ST3000DM- W1F07HZ-0001-2.73TB /pci@0,0/pci-ide@1f,2/ide@1/cmdk@1,0 (c5d1 was previously used as a hot spare, but I removed it as an attempt to export and import the zpool without the spare) # zpool export storage # zpool list (shows only rpool) # zpool import pool: storage id: 17210091810759984780 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: storage ONLINE raidz1-0 ONLINE c4d0ONLINE c4d1ONLINE c5d0ONLINE (check to see if it is importable to the old server, this has also been verified since I moved back the disks to the old server yesterday to have it available during the night) zdb -l output in attached files. --- Server 2 (new) I have attached the disks on the new server in the same order (which shouldn't matter as ZFS should locate the disks anyway) zpool import gives: root@backup:~# zpool import pool: storage id: 17210091810759984780 state: UNAVAIL action: The pool cannot be imported due to damaged devices or data. config: storageUNAVAIL insufficient replicas raidz1-0 UNAVAIL corrupted data c7t5000C50044E0F316d0 ONLINE c7t5000C50044A30193d0 ONLINE c7t5000C50044760F6Ed0 ONLINE The problem is that all the disks are there and online, but the pool is showing up as unavailable. Any ideas on what I can do more in order to solve this problem ? Regards, PeO zdb_l_c4d0s0.txt zdb_l_c4d1s0.txt zdb_l_c5d0s0.txt zdb_l_c5d1s0.txt zdb_l_c7t5000C50044A30193d0s0.txt zdb_l_c7t5000C50044E0F316d0s0.txt zdb_l_c7t5000C50044760F6Ed0s0.txt ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Unable to import exported zpool on a new server
2012-03-13 16:52, Hung-Sheng Tsao (LaoTsao) Ph.D wrote: hi are the disk/sas controller the same on both server? Seemingly no. I don't see the output of format on Server2, but for Server1 I see that the 3TB disks are used as IDE devices (probably with motherboard SATA-IDE emulation?) while on Server2 addressing goes like SAS with WWN names. It may be possible that on one controller disks are used natively while on another they are attached as a JBOD or a set of RAID0 disks (so the controller's logic or its expected layout intervenes), as recently discussed on-list? On Mar 13, 2012, at 6:10, P-O Yliniemip...@bsd-guide.net wrote: Hello, I'm currently replacing a temporary storage server (server1) with the one that should be the final one (server2). To keep the data storage from the old one I'm attempting to import it on the new server. Both servers are running OpenIndiana server build 151a. Server 1 (old) The zpool consists of three disks in a raidz1 configuration: # zpool status c4d0ONLINE 0 0 0 c4d1ONLINE 0 0 0 c5d0ONLINE 0 0 0 errors: No known data errors Output of format command gives: # format AVAILABLE DISK SELECTIONS: 0. c2t1d0LSILOGIC-LogicalVolume-3000 cyl 60785 alt 2 hd 255 sec 126 /pci@0,0/pci8086,25e2@2/pci8086,350c@0,3/pci103c,3015@6/sd@1,0 1. c4d0ST3000DM- W1F07HW-0001-2.73TB /pci@0,0/pci-ide@1f,2/ide@0/cmdk@0,0 2. c4d1ST3000DM- W1F05H2-0001-2.73TB /pci@0,0/pci-ide@1f,2/ide@0/cmdk@1,0 3. c5d0ST3000DM- W1F032R-0001-2.73TB /pci@0,0/pci-ide@1f,2/ide@1/cmdk@0,0 Server 2 (new) I have attached the disks on the new server in the same order (which shouldn't matter as ZFS should locate the disks anyway) zpool import gives: root@backup:~# zpool import pool: storage id: 17210091810759984780 state: UNAVAIL action: The pool cannot be imported due to damaged devices or data. config: storageUNAVAIL insufficient replicas raidz1-0 UNAVAIL corrupted data c7t5000C50044E0F316d0 ONLINE c7t5000C50044A30193d0 ONLINE c7t5000C50044760F6Ed0 ONLINE ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Unable to import exported zpool on a new server
Jim Klimov skrev 2012-03-13 15:24: 2012-03-13 16:52, Hung-Sheng Tsao (LaoTsao) Ph.D wrote: hi are the disk/sas controller the same on both server? Seemingly no. I don't see the output of format on Server2, but for Server1 I see that the 3TB disks are used as IDE devices (probably with motherboard SATA-IDE emulation?) while on Server2 addressing goes like SAS with WWN names. Correct, the servers are all different. Server1 is a HP xw8400, and the disks are connected to the first four SATA ports (the xw8400 has both SAS and SATA ports, of which I use the SAS ports for the system disks). On Server2, the disk controller used for the data disks is a LSI SAS 9211-8i, updated with the latest IT-mode firmware (also tested with the original IR-mode firmware) The output of the 'format' command on Server2 is: AVAILABLE DISK SELECTIONS: 0. c2t0d0 ATA-OCZ-VERTEX3-2.11-55.90GB /pci@0,0/pci8086,3410@9/pci15d9,5@0/sd@0,0 1. c2t1d0 ATA-OCZ-VERTEX3-2.11-55.90GB /pci@0,0/pci8086,3410@9/pci15d9,5@0/sd@1,0 2. c3d1 Unknown-Unknown-0001 cyl 38910 alt 2 hd 255 sec 63 /pci@0,0/pci-ide@1f,2/ide@0/cmdk@1,0 3. c4d0 Unknown-Unknown-0001 cyl 38910 alt 2 hd 255 sec 63 /pci@0,0/pci-ide@1f,5/ide@0/cmdk@0,0 4. c7t5000C5003F45CCF4d0 ATA-ST3000DM001-9YN1-CC46-2.73TB /scsi_vhci/disk@g5000c5003f45ccf4 5. c7t5000C50044E0F0C6d0 ATA-ST3000DM001-9YN1-CC46-2.73TB /scsi_vhci/disk@g5000c50044e0f0c6 6. c7t5000C50044E0F611d0 ATA-ST3000DM001-9YN1-CC46-2.73TB /scsi_vhci/disk@g5000c50044e0f611 Note that this is what it looks like now, not at the time I sent the question. The difference is that I have set up three other disks (items 4-6) on the new server, and are currently transferring the contents from Server1 to this one using zfs send/receive. I will probably be able to reconnect the correct disks to the Server2 tomorrow when the data has been transferred to the new disks (problem 'solved' at that moment), if there is anything else that I can do to try to solve it the 'right' way. It may be possible that on one controller disks are used natively while on another they are attached as a JBOD or a set of RAID0 disks (so the controller's logic or its expected layout intervenes), as recently discussed on-list? On the HP, on a reboot, I was reminded that the 3TB disks were displayed as 800GB-something by the BIOS (although correctly identified by OpenIndiana and ZFS). This could be a part of the problem with the ability to export/import the pool. On Mar 13, 2012, at 6:10, P-O Yliniemip...@bsd-guide.net wrote: Hello, I'm currently replacing a temporary storage server (server1) with the one that should be the final one (server2). To keep the data storage from the old one I'm attempting to import it on the new server. Both servers are running OpenIndiana server build 151a. Server 1 (old) The zpool consists of three disks in a raidz1 configuration: # zpool status c4d0ONLINE 0 0 0 c4d1ONLINE 0 0 0 c5d0ONLINE 0 0 0 errors: No known data errors Output of format command gives: # format AVAILABLE DISK SELECTIONS: 0. c2t1d0LSILOGIC-LogicalVolume-3000 cyl 60785 alt 2 hd 255 sec 126 /pci@0,0/pci8086,25e2@2/pci8086,350c@0,3/pci103c,3015@6/sd@1,0 1. c4d0ST3000DM- W1F07HW-0001-2.73TB /pci@0,0/pci-ide@1f,2/ide@0/cmdk@0,0 2. c4d1ST3000DM- W1F05H2-0001-2.73TB /pci@0,0/pci-ide@1f,2/ide@0/cmdk@1,0 3. c5d0ST3000DM- W1F032R-0001-2.73TB /pci@0,0/pci-ide@1f,2/ide@1/cmdk@0,0 Server 2 (new) I have attached the disks on the new server in the same order (which shouldn't matter as ZFS should locate the disks anyway) zpool import gives: root@backup:~# zpool import pool: storage id: 17210091810759984780 state: UNAVAIL action: The pool cannot be imported due to damaged devices or data. config: storageUNAVAIL insufficient replicas raidz1-0 UNAVAIL corrupted data c7t5000C50044E0F316d0 ONLINE c7t5000C50044A30193d0 ONLINE c7t5000C50044760F6Ed0 ONLINE ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Unable to import exported zpool on a new server
IMHO Zfs is smart but not smart when you deal with two different controller Sent from my iPhone On Mar 13, 2012, at 3:32 PM, P-O Yliniemi p...@bsd-guide.net wrote: Jim Klimov skrev 2012-03-13 15:24: 2012-03-13 16:52, Hung-Sheng Tsao (LaoTsao) Ph.D wrote: hi are the disk/sas controller the same on both server? Seemingly no. I don't see the output of format on Server2, but for Server1 I see that the 3TB disks are used as IDE devices (probably with motherboard SATA-IDE emulation?) while on Server2 addressing goes like SAS with WWN names. Correct, the servers are all different. Server1 is a HP xw8400, and the disks are connected to the first four SATA ports (the xw8400 has both SAS and SATA ports, of which I use the SAS ports for the system disks). On Server2, the disk controller used for the data disks is a LSI SAS 9211-8i, updated with the latest IT-mode firmware (also tested with the original IR-mode firmware) The output of the 'format' command on Server2 is: AVAILABLE DISK SELECTIONS: 0. c2t0d0 ATA-OCZ-VERTEX3-2.11-55.90GB /pci@0,0/pci8086,3410@9/pci15d9,5@0/sd@0,0 1. c2t1d0 ATA-OCZ-VERTEX3-2.11-55.90GB /pci@0,0/pci8086,3410@9/pci15d9,5@0/sd@1,0 2. c3d1 Unknown-Unknown-0001 cyl 38910 alt 2 hd 255 sec 63 /pci@0,0/pci-ide@1f,2/ide@0/cmdk@1,0 3. c4d0 Unknown-Unknown-0001 cyl 38910 alt 2 hd 255 sec 63 /pci@0,0/pci-ide@1f,5/ide@0/cmdk@0,0 4. c7t5000C5003F45CCF4d0 ATA-ST3000DM001-9YN1-CC46-2.73TB /scsi_vhci/disk@g5000c5003f45ccf4 5. c7t5000C50044E0F0C6d0 ATA-ST3000DM001-9YN1-CC46-2.73TB /scsi_vhci/disk@g5000c50044e0f0c6 6. c7t5000C50044E0F611d0 ATA-ST3000DM001-9YN1-CC46-2.73TB /scsi_vhci/disk@g5000c50044e0f611 Note that this is what it looks like now, not at the time I sent the question. The difference is that I have set up three other disks (items 4-6) on the new server, and are currently transferring the contents from Server1 to this one using zfs send/receive. I will probably be able to reconnect the correct disks to the Server2 tomorrow when the data has been transferred to the new disks (problem 'solved' at that moment), if there is anything else that I can do to try to solve it the 'right' way. It may be possible that on one controller disks are used natively while on another they are attached as a JBOD or a set of RAID0 disks (so the controller's logic or its expected layout intervenes), as recently discussed on-list? On the HP, on a reboot, I was reminded that the 3TB disks were displayed as 800GB-something by the BIOS (although correctly identified by OpenIndiana and ZFS). This could be a part of the problem with the ability to export/import the pool. On Mar 13, 2012, at 6:10, P-O Yliniemip...@bsd-guide.net wrote: Hello, I'm currently replacing a temporary storage server (server1) with the one that should be the final one (server2). To keep the data storage from the old one I'm attempting to import it on the new server. Both servers are running OpenIndiana server build 151a. Server 1 (old) The zpool consists of three disks in a raidz1 configuration: # zpool status c4d0ONLINE 0 0 0 c4d1ONLINE 0 0 0 c5d0ONLINE 0 0 0 errors: No known data errors Output of format command gives: # format AVAILABLE DISK SELECTIONS: 0. c2t1d0LSILOGIC-LogicalVolume-3000 cyl 60785 alt 2 hd 255 sec 126 /pci@0,0/pci8086,25e2@2/pci8086,350c@0,3/pci103c,3015@6/sd@1,0 1. c4d0ST3000DM- W1F07HW-0001-2.73TB /pci@0,0/pci-ide@1f,2/ide@0/cmdk@0,0 2. c4d1ST3000DM- W1F05H2-0001-2.73TB /pci@0,0/pci-ide@1f,2/ide@0/cmdk@1,0 3. c5d0ST3000DM- W1F032R-0001-2.73TB /pci@0,0/pci-ide@1f,2/ide@1/cmdk@0,0 Server 2 (new) I have attached the disks on the new server in the same order (which shouldn't matter as ZFS should locate the disks anyway) zpool import gives: root@backup:~# zpool import pool: storage id: 17210091810759984780 state: UNAVAIL action: The pool cannot be imported due to damaged devices or data. config: storageUNAVAIL insufficient replicas raidz1-0 UNAVAIL corrupted data c7t5000C50044E0F316d0 ONLINE c7t5000C50044A30193d0 ONLINE c7t5000C50044760F6Ed0 ONLINE ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss