Boyd Adamson wrote:
> "Enda O'Connor ( Sun Micro Systems Ireland)" <[EMAIL PROTECTED]>
> writes:
> [..]
>> meant to add that on x86 the following should do the trick ( again I'm open
>> to correction )
>>
>> installgrub /boot/grub/stage1 /zfsroot/boot/grub/stage2 /dev/rdsk/c1t0d0s0
>>
>> haven't t
"Enda O'Connor ( Sun Micro Systems Ireland)" <[EMAIL PROTECTED]>
writes:
[..]
> meant to add that on x86 the following should do the trick ( again I'm open
> to correction )
>
> installgrub /boot/grub/stage1 /zfsroot/boot/grub/stage2 /dev/rdsk/c1t0d0s0
>
> haven't tested the z86 one though.
I use
Hoping this is not too off topic.Can anyone confirm you can break a
mirrored zfs root pool once formed. I basically want to clone a boot drive,
take it to another piece of identical hardware and have two machines ( or more
). I am running indiana b93 on x86 hardware. I have read that
Enda O'Connor ( Sun Micro Systems Ireland) wrote:
> Mike Gerdts wrote:
>> On Wed, Jul 23, 2008 at 11:36 AM, <[EMAIL PROTECTED]> wrote:
>>> Rainer,
>>>
>>> Sorry for your trouble.
>>>
>>> I'm updating the installboot example in the ZFS Admin Guide with the
>>> -F zfs syntax now. We'll fix the insta
Mike Gerdts wrote:
> On Wed, Jul 23, 2008 at 11:36 AM, <[EMAIL PROTECTED]> wrote:
>> Rainer,
>>
>> Sorry for your trouble.
>>
>> I'm updating the installboot example in the ZFS Admin Guide with the
>> -F zfs syntax now. We'll fix the installboot man page as well.
>
> Perhaps it also deserves a me
On Wed, Jul 23, 2008 at 11:36 AM, <[EMAIL PROTECTED]> wrote:
> Rainer,
>
> Sorry for your trouble.
>
> I'm updating the installboot example in the ZFS Admin Guide with the
> -F zfs syntax now. We'll fix the installboot man page as well.
Perhaps it also deserves a mention in the FAQ somewhere near
Richard Elling wrote:
> Rainer Orth wrote:
>
>> Richard Elling writes:
>>
>>
>>
I've found out what the problem was: I didn't specify the -F zfs option to
installboot, so only half of the ZFS bootblock was written. This is a
combination of two documentation bugs and a ter
Rainer Orth wrote:
> Richard Elling writes:
>
>
>>> I've found out what the problem was: I didn't specify the -F zfs option to
>>> installboot, so only half of the ZFS bootblock was written. This is a
>>> combination of two documentation bugs and a terrible interface:
>>>
>>>
>> Mainl
On Wed, 23 Jul 2008, [EMAIL PROTECTED] wrote:
> Rainer,
>
> Sorry for your trouble.
>
> I'm updating the installboot example in the ZFS Admin Guide with the
> -F zfs syntax now. We'll fix the installboot man page as well.
>
> Mark, I don't have an x86 system to test right now, can you send me the
Cindy,
> Sorry for your trouble.
no problem.
> I'm updating the installboot example in the ZFS Admin Guide with the
> -F zfs syntax now. We'll fix the installboot man page as well.
Great, thanks.
Rainer
-
Rain
Rainer,
Sorry for your trouble.
I'm updating the installboot example in the ZFS Admin Guide with the
-F zfs syntax now. We'll fix the installboot man page as well.
Mark, I don't have an x86 system to test right now, can you send
me the correct installgrub syntax for booting a ZFS file system?
T
Richard Elling writes:
> > I've found out what the problem was: I didn't specify the -F zfs option to
> > installboot, so only half of the ZFS bootblock was written. This is a
> > combination of two documentation bugs and a terrible interface:
> >
>
> Mainly because there is no -F option?
Hu
Rainer Orth wrote:
> Rainer Orth <[EMAIL PROTECTED]> writes:
>
>
>>> instlalboot on the new disk and see if that fixes it.
>>>
>> Unfortunately, it didn't. Reconsidering now, I see that I ran installboot
>> against slice 0 (reduced by 1 sector as required by CR 6680633) instead of
>> sli
Rainer Orth <[EMAIL PROTECTED]> writes:
> > instlalboot on the new disk and see if that fixes it.
>
> Unfortunately, it didn't. Reconsidering now, I see that I ran installboot
> against slice 0 (reduced by 1 sector as required by CR 6680633) instead of
> slice 2 (whole disk). Doing so doesn't f
Mark J Musante writes:
> On Tue, 22 Jul 2008, Rainer Orth wrote:
>
> > I just wanted to attach a second mirror to a ZFS root pool on an Ultra
> > 1/170E running snv_93.
> >
> > I've followed the workarounds for CR 6680633 and 6680633 from the ZFS
> > Admin Guide, but booting from the newly atta
On Tue, 22 Jul 2008, Rainer Orth wrote:
> I just wanted to attach a second mirror to a ZFS root pool on an Ultra
> 1/170E running snv_93.
>
> I've followed the workarounds for CR 6680633 and 6680633 from the ZFS
> Admin Guide, but booting from the newly attached mirror fails like so:
I think yo
I just wanted to attach a second mirror to a ZFS root pool on an Ultra
1/170E running snv_93.
I've followed the workarounds for CR 6680633 and 6680633 from the ZFS Admin
Guide, but booting from the newly attached mirror fails like so:
Boot device: disk File and args:
17 matches
Mail list logo