update on this one:
a workaround if you so will, or the more appropriate way to do this is
apparently
to use lofiadm(1M) to create a pseudo block device comprising the file hosted
on NFS
and use the created lofi device (eg. /dev/lofi/1) as the device for zpool create
and all subsequent I/O
On Fri, 08 Jan 2010 18:33:06 +0100, Mike Gerdts mger...@gmail.com wrote:
I've written a dtrace script to get the checksums on Solaris 10.
Here's what I see with NFSv3 on Solaris 10.
jfyi, I've reproduces it as well using a Solaris 10 Update 8 SB2000 sparc client
and NFSv4.
much like you I
On Wed, 23 Dec 2009 03:02:47 +0100, Mike Gerdts mger...@gmail.com wrote:
I've been playing around with zones on NFS a bit and have run into
what looks to be a pretty bad snag - ZFS keeps seeing read and/or
checksum errors. This exists with S10u8 and OpenSolaris dev build
snv_129. This is
Frank Batschulat (Home) wrote:
This just can't be an accident, there must be some coincidence and thus
there's a good chance
that these CHKSUM errors must have a common source, either in ZFS or in NFS ?
One possible cause would be a lack of substantial exercise. The man
page says:
On Fri, Jan 8, 2010 at 5:28 AM, Frank Batschulat (Home)
frank.batschu...@sun.com wrote:
[snip]
Hey Mike, you're not the only victim of these strange CHKSUM errors, I hit
the same during my slightely different testing, where I'm NFS mounting an
entire, pre-existing remote file living in the
On Fri, Jan 8, 2010 at 9:11 AM, Mike Gerdts mger...@gmail.com wrote:
I've seen similar errors on Solaris 10 in the primary domain and on a
M4000. Unfortunately Solaris 10 doesn't show the checksums in the
ereport. There I noticed a mixture between read errors and checksum
errors - and lots
I've been playing around with zones on NFS a bit and have run into
what looks to be a pretty bad snag - ZFS keeps seeing read and/or
checksum errors. This exists with S10u8 and OpenSolaris dev build
snv_129. This is likely a blocker for anything thinking of
implementing parts of Ed's Zones on
On Tue, Dec 22, 2009 at 8:02 PM, Mike Gerdts mger...@gmail.com wrote:
I've been playing around with zones on NFS a bit and have run into
what looks to be a pretty bad snag - ZFS keeps seeing read and/or
checksum errors. This exists with S10u8 and OpenSolaris dev build
snv_129. This is likely
