On Mon, 2007-04-30 at 19:48 -0400, Jeff Victor wrote:
I don't know about other people, but I would need more configuration
information before beginning to untangle this.
Okay. Just wasn't sure what, so here's more info, in the global zone:
$ cat /etc/ipf/ipnat.conf
# allow any 192.168.1.x zone to use the internet
map e1000g0 192.168.1.0/24 - 0/32 proxy port ftp ftp/tcp
map e1000g0 192.168.1.0/24 - 0/32 portmap tcp/udp auto
map e1000g0 192.168.1.0/24 - 0/32
$ cat /etc/ipf/ipf.conf
#
# ipf.conf
#
# IP Filter rules to be loaded during startup
#
# See ipf(4) manpage for more information on
# IP Filter rules syntax.
pass in quick all keep state keep frags
pass out quick all keep state keep frags
The local zone is a whole root zone on zfs, with the following
network config:
network address=192.168.1.3 physical=e1000g0/
# ifconfig e1000g0:2
e1000g0:2: flags=201000843UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS mtu
1500 index 2
zone xfce
inet 192.168.1.3 netmask ff00 broadcast 192.168.1.255
# netstat -nr
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
- - -- -
default 129.156.226.1UG1 40
default 192.168.1.254UG1177
129.156.226.0129.156.226.169 U 1 74 e1000g0
129.156.226.0192.168.1.2 U 1 0 e1000g0:1
192.168.1.0 192.168.1.2 U 1 19 e1000g0:1
224.0.0.0129.156.226.169 U 1 0 e1000g0
127.0.0.1127.0.0.1UH1 82 lo0
In the zone:
# ifconfig -a
lo0:1: flags=2001000849UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL mtu
8232 index 1
inet 127.0.0.1 netmask ff00
e1000g0:2: flags=201000843UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS mtu
1500 index 2
inet 192.168.1.3 netmask ff00 broadcast 192.168.1.255
# netstat -nr
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
- - -- -
default 192.168.1.254UG1177
192.168.1.0 192.168.1.3 U 1 76 e1000g0:2
224.0.0.0192.168.1.3 U 1 0 e1000g0:2
127.0.0.1127.0.0.1UH1 0 lo0:1
# ping someserv
someserv is alive
# ls /net/someserv
/net/someserv: No such file or directory
# ssh [EMAIL PROTECTED]
Password:
Last login: Thu Apr 26 17:28:43 2007 from foo
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
In the global zone ls /net/someserv works fine.
Not sure what else may be relevant.
Thanks,
Laca
Laszlo (Laca) Peter wrote:
Hi,
I'm trying to set up zones with NAT on snv_60.
I followed the instructions found in various blogs and web pages
and got it mostly working, but I'm having trouble with certain
NFS mounts. ls /net/somehost works but ls /net/someotherhost
doesn't. I'm getting No such file or directory from the zone
(works fine from the global zone).
Similar issue with the automounted home directories:
ls /home/myuser reports permission denied.
At least some of the servers that I can't access are using
NFSv3, in case that matters.
I'm probably missing something obvious, but what is it?
Thanks,
Laca
___
zones-discuss mailing list
zones-discuss@opensolaris.org
