[Zope-dev] Re: ZCML and 'zopectl test'?
I just made ZopeTestCase defer all loading until it's layer(essentially deferring the import of ZopeLite which is sort of a subpar way to handle things and using a registry to handle installProducts). most of what happens in zopelite itself should be the layer(rather than carefully isolating the import) http://svn.zope.org/Zope/branches/whitmo-2.10-layers/ lurker, comments? from what I remember, the only issue was with the sandbox tests(for functional tests). basically in sandboxed test you need a fresh zodb for each test iirc. -w ___ Zope-Dev maillist - Zope-Dev@zope.org http://mail.zope.org/mailman/listinfo/zope-dev ** No cross posts or HTML encoding! ** (Related lists - http://mail.zope.org/mailman/listinfo/zope-announce http://mail.zope.org/mailman/listinfo/zope )
[Zope-dev] Re: ZCML and 'zopectl test'?
On 7 Jan 2007, at 20:44 , Tres Seaver wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Philipp von Weitershausen wrote: Andreas Jung wrote: I added Products/PageTemplates/configure.zcml to register an utility. That works fine when running Zope however "zopectl test" won't work properly anymore because the utility registration does not seem to happen when running the tests. Bug or feature? Tests need to do their own setup. ZCML isn't magically loaded for tests, unless those tests are run within a layer that loads all ZCML before running the tests. So, there are two options: - modify the setUp() of the tests in question to provideUtility(your_utility) - make the respective tests run in a layer that loads the ZCML. I don't think layer support is on the trunk yet. Whit Morriss has a branch where he added that to Zope 2, but it still hasn't been merged :( I'm pretty sure that layer support is on the 2.10 branch and the trunk: the CMF trunk tests now depend on it:: I phrased that wrongly. Layer support from the test runner perspective is in Zope 2 since Zope 2.9. But Zope 2 itself actually using test layers is not in any release branch. $ bin/zopectl show zdctl/zdrun options: schemafile: '/home/tseaver/projects/Zope-CVS/Zope-2.10-branch/lib/python/Zope2/ Startup/zopeschema.xml' ... $ bin/zopectl test Running tests via: /home/tseaver/projects/Zope-CVS/bin/python2.4 /home/tseaver/projects/Zope-CVS/Zope-2.10-branch/bin/test.py -v - --config-file /home/tseaver/projects/CMF/cmf_test/z210_cmfhead/etc/zope.conf Parsing /home/tseaver/projects/CMF/cmf_test/z210_cmfhead/etc/zope.conf Running tests at level 1 Running unit tests: Running: .. .. .. .. .. .. .. .. .. .. .. ... Ran 809 tests with 0 failures and 0 errors in 11.052 seconds. Running Products.CMFCore.testing.FunctionalZCMLLayer tests: Set up Products.CMFCore.testing.FunctionalZCMLLayer in 1.603 seconds. ... Tearing down left over layers: Tear down Products.GenericSetup.testing.ExportImportZCMLLayer in 0.000 seconds. Total: 1351 tests, 0 failures, 0 errors Tres. - -- === Tres Seaver +1 540-429-0999 [EMAIL PROTECTED] Palladion Software "Excellence by Design"http://palladion.com -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFoU2z+gerLs4ltQ4RAmxhAKDUo3oEHv8bUIoW/dLMmpeHvMWvdACgy1wU 0P+mwfqR/0MVCICtu5AZ568= =fuE+ -END PGP SIGNATURE- ___ Zope-Dev maillist - Zope-Dev@zope.org http://mail.zope.org/mailman/listinfo/zope-dev ** No cross posts or HTML encoding! ** (Related lists - http://mail.zope.org/mailman/listinfo/zope-announce http://mail.zope.org/mailman/listinfo/zope )
[Zope-dev] Re: ZCML and 'zopectl test'?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Philipp von Weitershausen wrote: > Andreas Jung wrote: >> I added Products/PageTemplates/configure.zcml to register an utility. >> That works fine when running Zope however "zopectl test" won't work >> properly anymore because the utility registration does not seem to >> happen when running the tests. Bug or feature? > > Tests need to do their own setup. ZCML isn't magically loaded for tests, > unless those tests are run within a layer that loads all ZCML before > running the tests. > > So, there are two options: > - modify the setUp() of the tests in question to > provideUtility(your_utility) > - make the respective tests run in a layer that loads the ZCML. I don't > think layer support is on the trunk yet. Whit Morriss has a branch where > he added that to Zope 2, but it still hasn't been merged :( I'm pretty sure that layer support is on the 2.10 branch and the trunk: the CMF trunk tests now depend on it:: $ bin/zopectl show zdctl/zdrun options: schemafile: '/home/tseaver/projects/Zope-CVS/Zope-2.10-branch/lib/python/Zope2/Startup/zopeschema.xml' ... $ bin/zopectl test Running tests via: /home/tseaver/projects/Zope-CVS/bin/python2.4 /home/tseaver/projects/Zope-CVS/Zope-2.10-branch/bin/test.py -v - --config-file /home/tseaver/projects/CMF/cmf_test/z210_cmfhead/etc/zope.conf Parsing /home/tseaver/projects/CMF/cmf_test/z210_cmfhead/etc/zope.conf Running tests at level 1 Running unit tests: Running: . Ran 809 tests with 0 failures and 0 errors in 11.052 seconds. Running Products.CMFCore.testing.FunctionalZCMLLayer tests: Set up Products.CMFCore.testing.FunctionalZCMLLayer in 1.603 seconds. ... Tearing down left over layers: Tear down Products.GenericSetup.testing.ExportImportZCMLLayer in 0.000 seconds. Total: 1351 tests, 0 failures, 0 errors Tres. - -- === Tres Seaver +1 540-429-0999 [EMAIL PROTECTED] Palladion Software "Excellence by Design"http://palladion.com -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFoU2z+gerLs4ltQ4RAmxhAKDUo3oEHv8bUIoW/dLMmpeHvMWvdACgy1wU 0P+mwfqR/0MVCICtu5AZ568= =fuE+ -END PGP SIGNATURE- ___ Zope-Dev maillist - Zope-Dev@zope.org http://mail.zope.org/mailman/listinfo/zope-dev ** No cross posts or HTML encoding! ** (Related lists - http://mail.zope.org/mailman/listinfo/zope-announce http://mail.zope.org/mailman/listinfo/zope )
Re: [Zope-dev] Re: ZCML and 'zopectl test'?
On Sun, Jan 07, 2007 at 12:14:32PM +0100, Philipp von Weitershausen wrote: > So, there are two options: > - modify the setUp() of the tests in question to > provideUtility(your_utility) > - make the respective tests run in a layer that loads the ZCML. I don't > think layer support is on the trunk yet. Whit Morriss has a branch where > he added that to Zope 2, but it still hasn't been merged :( The testrunner in zope 2 has supported layers for quite a while. I currently use layers in my tests with zope 2.9.1. TestLayersHowTo on zopewiki.org gives a working example. Or do you mean something else by "layer support"? -- Paul Winkler ___ Zope-Dev maillist - Zope-Dev@zope.org http://mail.zope.org/mailman/listinfo/zope-dev ** No cross posts or HTML encoding! ** (Related lists - http://mail.zope.org/mailman/listinfo/zope-announce http://mail.zope.org/mailman/listinfo/zope )
[Zope-dev] Re: ZCML and 'zopectl test'?
Andreas Jung wrote: I added Products/PageTemplates/configure.zcml to register an utility. That works fine when running Zope however "zopectl test" won't work properly anymore because the utility registration does not seem to happen when running the tests. Bug or feature? Tests need to do their own setup. ZCML isn't magically loaded for tests, unless those tests are run within a layer that loads all ZCML before running the tests. So, there are two options: - modify the setUp() of the tests in question to provideUtility(your_utility) - make the respective tests run in a layer that loads the ZCML. I don't think layer support is on the trunk yet. Whit Morriss has a branch where he added that to Zope 2, but it still hasn't been merged :( Philipp -- http://worldcookery.com -- Professional Zope documentation and training 2nd edition of Web Component Development with Zope 3 is now shipping! ___ Zope-Dev maillist - Zope-Dev@zope.org http://mail.zope.org/mailman/listinfo/zope-dev ** No cross posts or HTML encoding! ** (Related lists - http://mail.zope.org/mailman/listinfo/zope-announce http://mail.zope.org/mailman/listinfo/zope )