Re: 2 NICS - how to configure for DSL/LAN

[Markku Kolkka]

> I use to NICS:                                                      
>                                                                     
> 1. Realtek 8029       10Mbit                                             
> 2. 3COM 3c905b        10/100MBit                                           
                                                                      
Almost like our firewall (we have 3c905 without -b).                  
                                                                      
> How can I find out if eth0 is Realtek or 3COM?                      
                                                                      
# dmesg | grep '^eth.'                                                
eth0: RealTek RTL-8029 found at 0xd400, IRQ 9, 52:54:05:F1:04:0C.     
eth1: 3Com 3c905 Boomerang 100baseTx at 0xd000,  00:60:08:56:fd:f9,   
IRQ 10                                                                
eth1: Initial media type MII.                                         
eth1: MII #24 status 786f, link partner capability 40a1, setting      
half-duplex.                                                          
                                                                      
--                                                                    
    Markku Kolkka                                                     
    [EMAIL PROTECTED]                                              



_______________________________________________
Seawolf-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/seawolf-list