Hello
I have an ACER usb cdwriter that is supposed to be supported by cdrecord
it's actually supported:
[root@linux2 Simo]# cdrecord -scanbus
Cdrecord 1.11a07 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
Linux sg driver version: 3.1.17
Using libscg version 'schily-0.5'
scsibus0:
cdrecord: Warning: controller creates hard SCSI failure when retrieving CD
capabilities page.
0,0,0 0) 'USB ' 'CD-R/RW 6X4X6 ' 'E.BZ' Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
and when I try to burn then I have this:
[root@linux2 Simo]# cdrecord -v speed=4 dev=0,0,0 -data /cd-image
Cdrecord 1.11a07 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.17
Using libscg version 'schily-0.5'
atapi: 1
cdrecord: Warning: controller creates hard SCSI failure when retrieving CD
capabilities page.
Device type : Removable CD-ROM
Version : 2
Response Format: 1
Vendor_info : 'USB '
Identifikation : 'CD-R/RW 6X4X6 '
Revision : 'E.BZ'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO RAW/R16 RAW/R96R
Drive buf size : 1630208 = 1592 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 312 MB
Total size: 358 MB (35:30.16) = 159762 sectors
Lout start: 358 MB (35:32/12) = 159762 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11250 (97:32/00)
ATIP start of lead out: 337275 (74:59/00)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 26
Manufacturer: TDK Corporation
Blocks total: 337275 Blocks current: 337275 Blocks remaining: 177513
Starting to write CD/DVD at speed 4 in write mode for single session.
Last chance to quit, starting real write in 7 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Performing OPC...
cdrecord: Input/output error. send opc: scsi sendcmd: cmd timeout after 6.006
(60) s
CDB: 54 01 00 00 00 00 00 00 00 00
cmd finished after 6.006s timeout 60s
cdrecord: OPC failed.
cdrecord: fifo had 64 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
Please this error seem to be common around but can anybody tell me what's
really going please
_______________________________________________
Seawolf-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/seawolf-list
