would the problem be from the fact that I have this in my fstab ? :
LABEL=/ / ext2 defaults 1 1
LABEL=/chroot /chroot ext2 defaults 1 2
/dev/fd0 /mnt/floppy auto noauto,owner 0 0
none /proc proc defaults 0 0
none /dev/pts devpts gid=5,mode=620 0 0
/dev/hda5 swap swap defaults 0 0
/dev/cdrom /mnt/cdrom iso9660 noauto,owner,kudzu,ro
0 0
/dev/hdd4 /mnt/zip100.0 auto noauto,owner,kudzu 0 0
/dev/cdrom1 /mnt/cdrom1 iso9660 noauto,owner,kudzu,ro
0 0
On Thursday 20 September 2001 07:15 pm, you wrote:
> Hello
>
> I have an ACER usb cdwriter that is supposed to be supported by cdrecord
> it's actually supported:
>
> [root@linux2 Simo]# cdrecord -scanbus
> Cdrecord 1.11a07 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
> Linux sg driver version: 3.1.17
> Using libscg version 'schily-0.5'
> scsibus0:
> cdrecord: Warning: controller creates hard SCSI failure when retrieving CD
> capabilities page.
> 0,0,0 0) 'USB ' 'CD-R/RW 6X4X6 ' 'E.BZ' Removable CD-ROM
> 0,1,0 1) *
> 0,2,0 2) *
> 0,3,0 3) *
> 0,4,0 4) *
> 0,5,0 5) *
> 0,6,0 6) *
> 0,7,0 7) *
>
>
> and when I try to burn then I have this:
>
> [root@linux2 Simo]# cdrecord -v speed=4 dev=0,0,0 -data /cd-image
> Cdrecord 1.11a07 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.17
> Using libscg version 'schily-0.5'
> atapi: 1
> cdrecord: Warning: controller creates hard SCSI failure when retrieving CD
> capabilities page.
> Device type : Removable CD-ROM
> Version : 2
> Response Format: 1
> Vendor_info : 'USB '
> Identifikation : 'CD-R/RW 6X4X6 '
> Revision : 'E.BZ'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags : SWABAUDIO BURNFREE
> Supported modes: TAO PACKET SAO RAW/R16 RAW/R96R
> Drive buf size : 1630208 = 1592 KB
> FIFO size : 4194304 = 4096 KB
> Track 01: data 312 MB
> Total size: 358 MB (35:30.16) = 159762 sectors
> Lout start: 358 MB (35:32/12) = 159762 sectors
> Current Secsize: 2048
> ATIP info from disk:
> Indicated writing power: 4
> Is not unrestricted
> Is not erasable
> Disk sub type: Medium Type A, high Beta category (A+) (3)
> ATIP start of lead in: -11250 (97:32/00)
> ATIP start of lead out: 337275 (74:59/00)
> Disk type: Long strategy type (Cyanine, AZO or similar)
> Manuf. index: 26
> Manufacturer: TDK Corporation
> Blocks total: 337275 Blocks current: 337275 Blocks remaining: 177513
> Starting to write CD/DVD at speed 4 in write mode for single session.
> Last chance to quit, starting real write in 7 seconds.
> 0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> BURN-Free is OFF.
> Performing OPC...
> cdrecord: Input/output error. send opc: scsi sendcmd: cmd timeout after
> 6.006 (60) s
> CDB: 54 01 00 00 00 00 00 00 00 00
> cmd finished after 6.006s timeout 60s
> cdrecord: OPC failed.
> cdrecord: fifo had 64 puts and 0 gets.
> cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
>
> Please this error seem to be common around but can anybody tell me what's
> really going please
>
>
>
> _______________________________________________
> Seawolf-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/seawolf-list
_______________________________________________
Seawolf-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/seawolf-list
