Hi all,
Again, I am a beginner of RH. I think my idea is not better.
Do you want to install 3 OS on you computer?
Your hard disk is 20 GB.
First , you try to make a primary partition on your hard disk. Then
format and install win98.
Secondly, you make a partition for w2k. Then install w2k.
Finally, make partitions for RH ( / , 2 * RAM swap , /home , /var ,
/usr).Then install RH on first boot ......(not MBR). During installing RH.
Make a bootdisk.
After completing installation of RH. You boot your system with boot
disk. then create lilo.img file , copy it to M$ win98 partition , add a line
(c:\lilo.img "Redhat") to boot.ini file.
(Another way, you configure lilo.conf.)
This is my experiance,
Regards,
lonh
----- Original Message -----
From: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, September 25, 2001 10:54 PM
Subject: System hangs up when installing --> Further info
> Hello again,
>
> I forgot to mention that I am trying to partition the hard drive with disk
> druid. My configuration was the following:
>
> 1 Linux native 4 Gig --> Root
> 1 Linux Extended 64M
> The rest about 14 gig for Win2k.
>
> Could this be my problem?
>
> Would it be possible to make one more partition for Windows 98?
>
> Thanks,
> - Bjarki B
>
> > Greetings!
> >
> > I have an installation problem. I own a PC 800 MHZ PIII with 20 Gig IDE
> > disk. This is one of those custom made systems where the Soundcard,
Video
> > card and 3D accelerator are attached to the mainboard.
> >
> > This mainboard uses the GFX PRO chipset which integrates a 3D 128-bit
AGP
> > Graphics Accelerator and has an embedded 10BaseT/100BaseTX Network
> > Interface. The mainboard has a built-in PCI 3D Sound System. In addition
the
> > board has a full set of ATX I/O Ports including PS/2 keyboard and mouse
> > ports, two USB ports, a parallel port, a serial port and a VGA port.
> > It supports front-side bus speeds of 66MHz, 100MHz or 133MHz.
> >
> > So what happenes is that my system freezes when I try to install Red Hat
7.1
> > from the CD. I have tried using both the text interface, and the X
graphical
> > interface. It freezes at different points during the installation
process.
> > Usually when it is copying the Images to the hard drive. It has reached
the
> > package installation process once.
> >
> > Do you have any idea about what could be happening?
> >
> > I have also had problems when I was trying to install Windows 2000 on
the
> > same machine. Win 2000 gave me errors about the Hard Drive being corrupt
but
> > it seems to be ok. At least I can install and run Windows 98 on it. I
also
> > tried formatting the drive with Partition Magic and it didn't report any
bad
> > clusters on the drive, neither did Disk Druid when I checked the "bad
> > cluster check" checkbox.
> >
> > Any help would be greatly appreciated. It's terrible being without a
> > computer :o(
> >
> > - Bjarki Bjorgulfsson
> >
> >
> >
> > _______________________________________________
> > Seawolf-list mailing list
> > [EMAIL PROTECTED]
> > https://listman.redhat.com/mailman/listinfo/seawolf-list
>
>
>
> _______________________________________________
> Seawolf-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/seawolf-list
>
>
_______________________________________________
Seawolf-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/seawolf-list
