Yes it does work, I don't know where to install it but I had to insmod 3w-xxxx.o during setup for it to see the raid card. I also added a line in modules.conf and a ramdrive image as well so it would see the raid card on start up.
chuck --- Jason L Tibbitts III <[EMAIL PROTECTED]> wrote: > I have two machines, one with a 530GB RAID5 array on > a 3ware 6800 > controller and one with a 700GB RAID5 array on a > 3ware 7810 controller. > There is no other disk present in either machine; > all storage is behind the > 3ware controllers. > > The Red Hat 7.1 installer has no problems with the > 6800 card but will bomb > on the machine with the 7810 card saying there are > no disks in the system > to format. Even in expert mode, I never even get to > choose a module to > try. > > Is the 7810 supported at all? (Yes, I checked the > HCL, but it doesn't even > list the 6800 as being compatible.) My guess is > that I need to tweak a > table of PCI IDs so that the installer will insmod > the 3w-xxxx module at > the appropriate time, but I have no idea where this > table might be located. > I'm willing to hack about if anyone has any > pointers. > > - J< > > > > _______________________________________________ > Seawolf-list mailing list > [EMAIL PROTECTED] > https://listman.redhat.com/mailman/listinfo/seawolf-list __________________________________________________ Do You Yahoo!? NEW from Yahoo! GeoCities - quick and easy web site hosting, just $8.95/month. http://geocities.yahoo.com/ps/info1 _______________________________________________ Seawolf-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/seawolf-list
