Hi, everyone, I built a RESP file (attached) using the IRIS tool PDCC<http://www.iris.edu/dms/nodes/dmc/software/downloads/pdcc/>, but am having problems with it in SEISAN. I can use this file in SAC to remove the instrument response, but when I attempt to convert my data into ground motion in SEISAN (e.g. mulplt), it crashes with the following error: At line 1821 of file sys_resp.for Fortran runtime error: Bad value during integer read
Backtrace for this error: #0 0x0000003a000ac824 in wait () from /lib64/libc.so.6 #1 0x00007f370a92300d in ?? () from /usr/lib64/libgfortran.so.3 #2 0x00007f370a92482e in ?? () from /usr/lib64/libgfortran.so.3 #3 0x00007f370a924a81 in _gfortran_generate_error () from /usr/lib64/libgfortran.so.3 #4 0x00007f370a9cab34 in ?? () from /usr/lib64/libgfortran.so.3 #5 0x00007f370a9ce377 in ?? () from /usr/lib64/libgfortran.so.3 #6 0x000000000049b40f in read_seed_resp_ () #7 0x0000000000499f89 in read_resp_ () #8 0x0000000000477e3a in trans_filt_ () #9 0x000000000047a3f7 in picc_ () #10 0x000000000042192f in MAIN__ () #11 0x0000000000422227 in main () It appears that the problem is that the RESP files that PDCC produces put the response data into different columns than sys_resp.for expects. Has anyone experienced this problem and found a work-around? I could write a code to properly format the output of PDCC, but will leave that as a last resort. Thank you! Seth ============================================================= N. Seth Carpenter Seismologist Kentucky Geological Survey 228 MMRB, University of Kentucky Lexington, Kentucky 40506-0107 (859) 323-0563 [email protected]
RESP.KY.HEKY.00.HNZ.20140417
Description: RESP.KY.HEKY.00.HNZ.20140417
_______________________________________________ seisan mailing list [email protected] http://mailman.uib.no/listinfo/seisan
