Hi,

I have two Sems 1.4.3 (announcing, redirects, CDR) behind two OpenSIPS.
I use the DR module in OpenSIPS, which sends every 30 seconds an OPTIONS to the specified hosts. If the host respond with "200 OK", the host is reachable in the routing of OpenSIPS. My problem now is, that Sems don't respond with "200 OK" but with "404 Not found".

Here the trace:

OpenSIPS                                           Sems
1.2.3.4:5060                                       1.2.3.5:5060
|                                                  | <Call><PFrame><Time>
|                                                  |
| F1 OPTIONS                                       |
|>------------------------------------------------>|  1 PF:1   15:05:19.7884
|                                                  |
|                                 Not found 404 F2 |
|<------------------------------------------------<|  1 PF:2   15:05:19.7889

================================================================================

     SIP MESSAGE 1        1.2.3.4:5060(OpenSIPS) -> 1.2.3.5:5060(Sems)
UDP Frame 1 10/Sep/13 15:05:19.7884 TimeFromPreviousSipFrame=0.0000 TimeFromStart=0.0000
OPTIONS sip:sems1.test.com SIP/2.0
Via: SIP/2.0/UDP 1.2.3.4:5060;branch=z9hG4bKed0c.4bc9c54.0
To: sip:sems1.test.com
From: <sip:[email protected]>;tag=65e8ffb57d58208c14c17804698c44b4-4913
CSeq: 10 OPTIONS
Call-ID: [email protected]
Max-Forwards: 70
Content-Length: 0
User-Agent: OpenSIPS


================================================================================

     SIP MESSAGE 2        1.2.3.5:5060(Sems) -> 1.2.3.4:5060(OpenSIPS)
UDP Frame 2 10/Sep/13 15:05:19.7889 TimeFromPreviousSipFrame=0.0005 TimeFromStart=0.0005
SIP/2.0 404 Not found
Via: SIP/2.0/UDP 1.2.3.4:5060;branch=z9hG4bKed0c.4bc9c54.0;received=1.2.3.4
To: sip:sems1.test.com;tag=580A8BF1-522F190F000C097D-74709700
From: <sip:[email protected]>;tag=65e8ffb57d58208c14c17804698c44b4-4913
CSeq: 10 OPTIONS
Call-ID: [email protected]
Server: Sip Express Media Server
Content-Length: 0


================================================================================

In the syslog I see the following error:
ERROR: could not find any application matching configured criteria

In the sems.conf I set: application = $(apphdr)

I think, that I don't have any possibility to set a SIP header.

Has someone an idea to solve this issue?

Regards,
Julian

_______________________________________________
Sems mailing list
[email protected]
http://lists.iptel.org/mailman/listinfo/sems

Reply via email to