Stefan, Yes. My system has the following configuration:
sems.conf: load_plugins=sbc;wav;session_timer application=sbc symmetricrpt.sbcprofile.conf: enable_rtprelay=yes When I run in this configuration, DTMF (out of band, 2833) is relayed to my application server. Inband DTMF also works under this configuration. If I edit the sems.conf file and remove the 'wav' module from load_plugins, service sems restart, then run the exact same test, then out-of-band (2833) DTMF is not relayed to my application server. Inband DTMF continues to work under this configuration. I only found this by trial and error and setting different configurations in the load_plugins config option. Please let me know if I can provide any additional information or logs. Larry -----Original Message----- From: Stefan Sayer [mailto:[email protected]] Sent: Tuesday, February 25, 2014 4:28 PM To: Schaefer, Larry; [email protected] Subject: Re: [Sems] No DTMF after upgrade from 1.4.3 to 1.5.0 Hello, o Schaefer, Larry on 02/25/2014 10:16 PM: > I have found my issue... When I added wav to my sems.conf load_plugins > setting and now everything is working. > > > > load_plugins=sbc;wav;session_timer > this is really puzzling. So you are saying that in a call handled by the sbc module and with RTP relayed the RTP DTMF packets are not relayed if the wav module is not loaded, but are relayed if the wav module is loaded? Stefan _______________________________________________ Sems mailing list [email protected] http://lists.iptel.org/mailman/listinfo/sems
