[ http://tracker.iptel.org/browse/SEMS-32?page=all ]
Stefan Sayer closed SEMS-32.
----------------------------
Resolution: Fixed
fixed with setting a higher value, and reporting if different RTP TS received
> DTMF: modify WAIT_TIMEOUT if key up is received
> -----------------------------------------------
>
> Key: SEMS-32
> URL: http://tracker.iptel.org/browse/SEMS-32
> Project: SEMS
> Issue Type: Bug
> Assigned To: Raphael Coeffic
>
> WAIT_TIMEOUT should generally be higher than 100ms, but in the case that key
> up is received, a lower timeout value should be used.
> This would make DTMF in jittery conditions more robust, but still in the
> normal case not delay reporting of DTMF too much.
> if e.g. RTP payload with end=1 is received, or inband end of tone is
> detected, it should be sent after max 100ms. For the other cases e.g. 250ms
> should be used.
> It would be also useful to make WAIT_TIMEOUT configurable
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://tracker.iptel.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
_______________________________________________
Semsdev mailing list
[email protected]
http://lists.iptel.org/mailman/listinfo/semsdev
