To install the antenna, you're gonna have to remove the plastic trim around
the roof liner starting in the rear, then towards the front(only on one side
though) from there, you drill the whole in the roof, install it, run the wire
down the side where the roof liner is removed. When you get to the dashboard
there should be a little opening where you can run the wire into it. Then all
you have to do is remove the existing antenna wire from the back of the
stereo, and connect the Fuba antenna there. You also have to hook the antenna
up to a power source because it's a 12v antenna.(to enhance the reception)
You can hook this up to the accessory wire(it should be blue) behind the
radio. Then simply tie up all of the slack, and re-install the plastic trim/
roof liner
-LIVEfrom718
+----------------------------------------------------------------------+
To unsubscribe, put "unsubscribe" (by itself) in the subject and send to
[EMAIL PROTECTED] or use the form at http://www.sentra.net/sml
