Which viscosity do you recomend?
----- Original Message -----
From: "Thomas F" <[EMAIL PROTECTED]>
To: "Sentra Mailing List" <[EMAIL PROTECTED]>
Sent: Sunday, February 25, 2001 6:44 PM
Subject: Re: SML: Timing Chain or Camshaft sound
>
> --- [EMAIL PROTECTED] wrote:<snip>
> > > I have a 94 Sentra LE GA16DE with 128K and I was
> > using the qastro Synthetic
> > 5W50 for a long time but one of my machanic buddies
> > told me that when my car
> > gets close to 100K to start using 20W50 or a
> > straight 30W oil. I tried it and
> > no more knocks and pings. I would recommend using a
> > higher grade of oil.
> Stick with the factory recommendations.
>
> >
> > I have a question, I put headers on my 1.6L and when
> > I started the engine
> > after it warmed up the RPM went down idleing real
> > low and it never did that
> > before. I do have a problem with my engine
> > maintaining a constant rpm,
> > sometimes when I turn my steering wheel, or stop at
> > a red light the rpm
> > gauges needle bounces up and down. Does anyone have
> > any suggestion on what
> > could be the problem?
> Two suggestions:
> 1) Check your idle adjustment.
> 2)Go back to the proper grade of oil.
>
> Using too thick a viscosity for your motor can cause
> reduced HP,rough idle,and reduced fuel economy.
>
> Thomas Fox
> 93 NX2000
>
> __________________________________________________
> Do You Yahoo!?
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/
>
>
> +----------------------------------------------------------------------+
> To unsubscribe, put "unsubscribe" (by itself) in the subject and send to
> [EMAIL PROTECTED] or use the form at http://www.sentra.net/sml
>
>
+----------------------------------------------------------------------+
To unsubscribe, put "unsubscribe" (by itself) in the subject and send to
[EMAIL PROTECTED] or use the form at http://www.sentra.net/sml
