Hi Laura, Any idea what's causing this?
- Andrew On 5/3/10 8:14 AM, "Laura Spitler" <[email protected]> wrote: > Hi all, > I killed the datarecorder script because the beam got stuck again > during observations on May 1. > > Laura > > > > On Mon, May 3, 2010 at 11:08 AM, <[email protected]> wrote: >> >> SERENDIP V.5 CRITICAL ERROR REPORT >> >> EDT has closed down. Buffer overflow likely! >> Mon May 3 10:54:40 2010 : MEM[0] : Closing down EDT >> The BEE2 is responding to pings: >> PING beecourageous (192.168.1.86) 56(84) bytes of data. >> 64 bytes from beecourageous (192.168.1.86): icmp_seq=1 ttl=64 time=0.638 ms >> >> --- beecourageous ping statistics --- >> 1 packets transmitted, 1 received, 0% packet loss, time 0ms >> rtt min/avg/max/mdev = 0.638/0.638/0.638/0.000 ms >> The iBOB is responding to pings: >> PING ddc (192.168.2.6) 56(84) bytes of data. >> 64 bytes from ddc (192.168.2.6): icmp_seq=1 ttl=64 time=4.14 ms >> >> --- ddc ping statistics --- >> 1 packets transmitted, 1 received, 0% packet loss, time 0ms >> rtt min/avg/max/mdev = 4.147/4.147/4.147/0.000 ms >> >> >> *****The data collection process is **NOT RUNNING** as of Monday 03rd May >> 2010 11:00:01 AM >> Attempting to restart the BEE... >> >> Power off command output: >> >> Power on command output: >> Attempting to restart the IBOB... >> >> Power off command output: >> >> Power on command output: >> >> Current Status: 1 ON >> 2 OFF >> 3 ON >> 4 ON >> 5 ON >> 6 OFF >> 7 ON >> 8 OFF >> >> Sleeping 60 seconds to wait for fpga devices to come back up... >> >> !!Success!! The iBOB has awoken: >> PING ddc (192.168.2.6) 56(84) bytes of data. >> 64 bytes from ddc (192.168.2.6): icmp_seq=1 ttl=64 time=3.65 ms >> >> --- ddc ping statistics --- >> 1 packets transmitted, 1 received, 0% packet loss, time 0ms >> rtt min/avg/max/mdev = 3.652/3.652/3.652/0.000 ms >> !!Success!! The BEE2 lives! >> Sleeping 5 minutes to let the BEE2 boot... >> Attempting to restart the whole shebang... >> Check output below: >> root >> copying dr2_config_short into dr2_config >> copying old output files for safekeeping >> killing any previous setispec_dr runs >> killing old disk buf collector... >> killing previous ssh instances to run sendstatus on o...@beecourageous >> initalizing the iBOB >> >> 7 beam, 2 pol >> Number of beams: 7 >> Number of pols: 2 >> Number of cycles: 1 >> Dwelltime: 1 >> Max address: 14 >> >> >> 0x0000 / 00000 -> 0x000000ED / 0b00000000000000000000000011101101 / >> 0000000237 >> >> >> >> 0x0001 / 00001 -> 0x000000EB / 0b00000000000000000000000011101011 / >> 0000000235 >> >> >> >> 0x0002 / 00002 -> 0x000000E7 / 0b00000000000000000000000011100111 / >> 0000000231 >> >> >> >> 0x0003 / 00003 -> 0x000000DE / 0b00000000000000000000000011011110 / >> 0000000222 >> >> >> >> 0x0004 / 00004 -> 0x000000DD / 0b00000000000000000000000011011101 / >> 0000000221 >> >> >> >> 0x0005 / 00005 -> 0x000000DB / 0b00000000000000000000000011011011 / >> 0000000219 >> >> >> >> 0x0006 / 00006 -> 0x000000D7 / 0b00000000000000000000000011010111 / >> 0000000215 >> >> >> >> 0x0007 / 00007 -> 0x000000BE / 0b00000000000000000000000010111110 / >> 0000000190 >> >> >> >> 0x0008 / 00008 -> 0x000000BD / 0b00000000000000000000000010111101 / >> 0000000189 >> >> >> >> 0x0009 / 00009 -> 0x000000BB / 0b00000000000000000000000010111011 / >> 0000000187 >> >> >> >> 0x000A / 00010 -> 0x000000B7 / 0b00000000000000000000000010110111 / >> 0000000183 >> >> >> >> 0x000B / 00011 -> 0x0000007E / 0b00000000000000000000000001111110 / >> 0000000126 >> >> >> >> 0x000C / 00012 -> 0x0000007D / 0b00000000000000000000000001111101 / >> 0000000125 >> >> >> >> 0x000D / 00013 -> 0x0000007B / 0b00000000000000000000000001111011 / >> 0000000123 >> >> >> >> 0x000E / 00014 -> 0x00000000 / 0b00000000000000000000000000000000 / >> 0000000000 >> >> >> rebooting the bee2 >> tcgetattr: Inappropriate ioctl for device >> killing previous sendstatus >> deleting previous nohup file >> killing running bofs >> loading new bofs >> nohup: appending output to `nohup.out' >> nohup: appending output to `nohup.out' >> nohup: appending output to `nohup.out' >> nohup: appending output to `nohup.out' >> configuring chips >> Setting the maximum number of hits to: 25 >> Setting the scale threshold to 80 >> done >> Connection to beecourageous closed. >> starting sendstatus >> starting diskbuf cleaner >> starting new run >> imdonenow >> >> >> Disk Usage: >> Filesystem Size Used Avail Use% Mounted on >> /dev/md1 226G 96G 130G 43% / >> tmpfs 2.0G 0 2.0G 0% /lib/init/rw >> udev 10M 108K 9.9M 2% /dev >> tmpfs 2.0G 0 2.0G 0% /dev/shm >> /dev/md0 236M 35M 190M 16% /boot >> /dev/sdc1 1.4T 147G 1.3T 11% /mockdata >> >> >> >> >
