Not really. I assume the thread that reads the beam number from the iBOB is failing somehow. Why this started being in the problem in the last few weeks, I have no idea.
Laura On Mon, May 3, 2010 at 11:35 AM, Andrew Siemion <[email protected]> wrote: > Hi Laura, > > Any idea what's causing this? > > - Andrew > > On 5/3/10 8:14 AM, "Laura Spitler" <[email protected]> wrote: > >> Hi all, >> I killed the datarecorder script because the beam got stuck again >> during observations on May 1. >> >> Laura >> >> >> >> On Mon, May 3, 2010 at 11:08 AM, <[email protected]> wrote: >>> >>> SERENDIP V.5 CRITICAL ERROR REPORT >>> >>> EDT has closed down. Buffer overflow likely! >>> Mon May 3 10:54:40 2010 : MEM[0] : Closing down EDT >>> The BEE2 is responding to pings: >>> PING beecourageous (192.168.1.86) 56(84) bytes of data. >>> 64 bytes from beecourageous (192.168.1.86): icmp_seq=1 ttl=64 time=0.638 ms >>> >>> --- beecourageous ping statistics --- >>> 1 packets transmitted, 1 received, 0% packet loss, time 0ms >>> rtt min/avg/max/mdev = 0.638/0.638/0.638/0.000 ms >>> The iBOB is responding to pings: >>> PING ddc (192.168.2.6) 56(84) bytes of data. >>> 64 bytes from ddc (192.168.2.6): icmp_seq=1 ttl=64 time=4.14 ms >>> >>> --- ddc ping statistics --- >>> 1 packets transmitted, 1 received, 0% packet loss, time 0ms >>> rtt min/avg/max/mdev = 4.147/4.147/4.147/0.000 ms >>> >>> >>> *****The data collection process is **NOT RUNNING** as of Monday 03rd May >>> 2010 11:00:01 AM >>> Attempting to restart the BEE... >>> >>> Power off command output: >>> >>> Power on command output: >>> Attempting to restart the IBOB... >>> >>> Power off command output: >>> >>> Power on command output: >>> >>> Current Status: 1 ON >>> 2 OFF >>> 3 ON >>> 4 ON >>> 5 ON >>> 6 OFF >>> 7 ON >>> 8 OFF >>> >>> Sleeping 60 seconds to wait for fpga devices to come back up... >>> >>> !!Success!! The iBOB has awoken: >>> PING ddc (192.168.2.6) 56(84) bytes of data. >>> 64 bytes from ddc (192.168.2.6): icmp_seq=1 ttl=64 time=3.65 ms >>> >>> --- ddc ping statistics --- >>> 1 packets transmitted, 1 received, 0% packet loss, time 0ms >>> rtt min/avg/max/mdev = 3.652/3.652/3.652/0.000 ms >>> !!Success!! The BEE2 lives! >>> Sleeping 5 minutes to let the BEE2 boot... >>> Attempting to restart the whole shebang... >>> Check output below: >>> root >>> copying dr2_config_short into dr2_config >>> copying old output files for safekeeping >>> killing any previous setispec_dr runs >>> killing old disk buf collector... >>> killing previous ssh instances to run sendstatus on o...@beecourageous >>> initalizing the iBOB >>> >>> 7 beam, 2 pol >>> Number of beams: 7 >>> Number of pols: 2 >>> Number of cycles: 1 >>> Dwelltime: 1 >>> Max address: 14 >>> >>> >>> 0x0000 / 00000 -> 0x000000ED / 0b00000000000000000000000011101101 / >>> 0000000237 >>> >>> >>> >>> 0x0001 / 00001 -> 0x000000EB / 0b00000000000000000000000011101011 / >>> 0000000235 >>> >>> >>> >>> 0x0002 / 00002 -> 0x000000E7 / 0b00000000000000000000000011100111 / >>> 0000000231 >>> >>> >>> >>> 0x0003 / 00003 -> 0x000000DE / 0b00000000000000000000000011011110 / >>> 0000000222 >>> >>> >>> >>> 0x0004 / 00004 -> 0x000000DD / 0b00000000000000000000000011011101 / >>> 0000000221 >>> >>> >>> >>> 0x0005 / 00005 -> 0x000000DB / 0b00000000000000000000000011011011 / >>> 0000000219 >>> >>> >>> >>> 0x0006 / 00006 -> 0x000000D7 / 0b00000000000000000000000011010111 / >>> 0000000215 >>> >>> >>> >>> 0x0007 / 00007 -> 0x000000BE / 0b00000000000000000000000010111110 / >>> 0000000190 >>> >>> >>> >>> 0x0008 / 00008 -> 0x000000BD / 0b00000000000000000000000010111101 / >>> 0000000189 >>> >>> >>> >>> 0x0009 / 00009 -> 0x000000BB / 0b00000000000000000000000010111011 / >>> 0000000187 >>> >>> >>> >>> 0x000A / 00010 -> 0x000000B7 / 0b00000000000000000000000010110111 / >>> 0000000183 >>> >>> >>> >>> 0x000B / 00011 -> 0x0000007E / 0b00000000000000000000000001111110 / >>> 0000000126 >>> >>> >>> >>> 0x000C / 00012 -> 0x0000007D / 0b00000000000000000000000001111101 / >>> 0000000125 >>> >>> >>> >>> 0x000D / 00013 -> 0x0000007B / 0b00000000000000000000000001111011 / >>> 0000000123 >>> >>> >>> >>> 0x000E / 00014 -> 0x00000000 / 0b00000000000000000000000000000000 / >>> 0000000000 >>> >>> >>> rebooting the bee2 >>> tcgetattr: Inappropriate ioctl for device >>> killing previous sendstatus >>> deleting previous nohup file >>> killing running bofs >>> loading new bofs >>> nohup: appending output to `nohup.out' >>> nohup: appending output to `nohup.out' >>> nohup: appending output to `nohup.out' >>> nohup: appending output to `nohup.out' >>> configuring chips >>> Setting the maximum number of hits to: 25 >>> Setting the scale threshold to 80 >>> done >>> Connection to beecourageous closed. >>> starting sendstatus >>> starting diskbuf cleaner >>> starting new run >>> imdonenow >>> >>> >>> Disk Usage: >>> Filesystem Size Used Avail Use% Mounted on >>> /dev/md1 226G 96G 130G 43% / >>> tmpfs 2.0G 0 2.0G 0% /lib/init/rw >>> udev 10M 108K 9.9M 2% /dev >>> tmpfs 2.0G 0 2.0G 0% /dev/shm >>> /dev/md0 236M 35M 190M 16% /boot >>> /dev/sdc1 1.4T 147G 1.3T 11% /mockdata >>> >>> >>> >>> >> > > >
